China VS2 Pump – API 610 Vertical Submerged Single‑Stage Volute Pump (Long Shaft, Single Casing, Tank Top Installation)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
We are a professional China VS2 pump manufacturer producing API 610 vertical submerged single‑stage volute type pumps. Conventional volute casing, long shaft suspended from tank top mounting plate, single casing. Perfect for ordinary submerged depth, tank to tank transfer, and petroleum products such as crude oil, diesel, gasoline, and light fuel oils. One‑stop service.

Conatct For Details
DetailReview(0)Additional

We are a professional China VS2 pump manufacturer, offering high‑quality API 610 compliant vertical submerged single‑stage volute type pumps. Our VS2 series features a conventional volute casing, a long shaft suspended from a top mounting plate (tank top installation), and a single casing design. Unlike diffuser‑type VS1 pumps, the VS2 uses a volute (spiral) casing to collect and convert velocity to pressure. This robust, well‑understood design is ideal for ordinary submerged depth applications, tank‑to‑tank transfer, and handling a wide range of petroleum products including crude oil, diesel, gasoline, and light fuel oils.

What is a VS2 Pump?

According to API 610, the VS2 pump is a vertical suspended, single‑stage, volute type, single‑casing, submerged pump. Key characteristics:

  • Vertical suspended design – the pump is mounted on a top plate (e.g., tank roof or concrete pit cover) and suspended into the liquid.

  • Volute (spiral) casing – the impeller discharges into a spiral volute, which is simple, rugged, and well‑suited for clean liquids and moderate solids content compared to diffuser designs.

  • Long shaft with optional intermediate bearings – for deeper submersion, the shaft is supported by sleeve bearings along its length.

  • Single casing – the volute casing and column pipe are immersed; no outer barrel (unlike VS6). The discharge pipe runs up through the column.

  • Tank top installation – the pump is mounted directly on a flange or plate on top of a storage tank, eliminating the need for a separate pit.

Why Choose Our China VS2 Pump?

When you search for a reliable China VS2 pump manufacturer, you need a supplier who offers robust volute hydraulics, reliable long shaft suspension, and tank‑friendly installation. Our VS2 pumps are engineered for:

  • Ordinary submerged depths (typically 2–10 meters, deeper on request)

  • Tank top mounting – direct installation on tank roofs, saving civil work costs

  • Petroleum product transfer (crude oil, diesel, gasoline, kerosene, light fuel oil)

  • Storage tank unloading and filling (from tanker to tank, or tank to process)

  • Simple, rugged volute casing – easy to manufacture, maintain, and repair

  • Good efficiency and stable operation for clean and slightly contaminated liquids

Designed for Typical Working Conditions

Our China VS2 pumps run reliably in:

  • Petroleum storage terminals (tank suction, tank transfer)

  • Refinery tank farms (product movement between tanks)

  • Chemical tank farms (compatible chemicals with appropriate materials)

  • Ordinary submerged services where NPSH is adequate (not extremely low NPSH)

  • Water sumps and pits (clean water, cooling water)

  • Continuous or intermittent operation for tank filling and emptying

Compatible Media

The VS2 pump handles clean or moderately dirty liquids, particularly petroleum products:

  • Crude oil (with appropriate viscosity and material selection)

  • Diesel, gasoline, kerosene, jet fuel

  • Light fuel oils (low to medium viscosity)

  • Naphtha, straight run gasoline, reformate

  • Lube oil (low to medium viscosity grades) – with correct bearing materials

  • Water, cooling water, industrial service water

  • Mild chemicals (compatible with stainless steel or lined materials)

**Avoid highly cavitation‑prone liquids with very low NPSHa – VS1 diffuser design may be better. For very high viscosity, positive displacement pumps may be required.

Key Technical Features

  • Standard: API 610 (11th edition), API 682 for mechanical seals (at top, above liquid)

  • Design: Vertical suspended, single‑stage, volute type, single casing, long shaft

  • Casing: Conventional volute (spiral) with optional wear rings

  • Submersion depth: Standard 2–10 meters; deeper on request (with intermediate shaft bearings)

  • Flow: 10 – 3000 m³/h (customizable; typical 50‑1500 m³/h)

  • Head: Up to 150 meters (single‑stage; multistage optional as VS6 for higher head)

  • Temperature: -20°C to +200°C (higher with special mechanical seals and materials)

  • Materials: Carbon steel (WCB, LCC), stainless steel (304, 316, duplex), special alloys for chemicals

  • Intermediate bearings: Sleeve type (liquid lubricated by pumped fluid; optional external flush for dirty service)

  • Discharge: Flanged nozzle at top plate – ANSI, ASME, DIN, JIS

  • Shaft sealing: Gland packing or mechanical seal at the top (above liquid level) per API 682

  • Column pipe: Carbon steel or stainless steel, flanged sections with bearing spiders

Product Advantages

  • Tank top installation – direct mounting on storage tank roofs eliminates expensive underground pits and simplifies maintenance access.

  • Conventional volute casing – robust, field‑proven design with easy access for inspection and repair compared to diffuser bowls.

  • Good suction performance – volute design provides adequate NPSH for most petroleum and water services (though VS1 is better for very low NPSH).

  • Long shaft with intermediate bearings – supports deep submersion stably; bearings are lubricated by the pumped fluid.

  • Simple single casing – lower cost than double‑casing vertical pumps; suitable for moderate head and pressure.

  • API 610 compliance – designed for continuous heavy‑duty service in refineries, terminals, and chemical plants.

  • Easy disassembly – the entire pump column can be withdrawn vertically from the tank without emptying the tank (if a suction strainer/check valve is used).

One‑Stop Full Service

As a leading China VS2 pump manufacturer, we provide a complete one‑stop service for vertical volute submerged pumps:

  1. Selection & hydraulic design – we match flow, head, media viscosity, and submersion depth.

  2. Custom shaft length & bearing spacing – engineered for your exact tank height and operating level.

  3. Manufacturing – precision volute casting, shaft machining, dynamic balancing, column assembly.

  4. Factory testing – hydrostatic test, performance test, vibration test, runout check for long shaft.

  5. Delivery – lead time for standard VS2 pumps: 12–20 weeks; expedited possible.

  6. Installation & commissioning – on‑site guidance for top plate mounting, vertical alignment, column assembly.

  7. After‑sales – complete spare shaft with bearings, impeller, volute casing, wear rings, top seal parts, field service.

Main Applications

  • Petroleum storage terminal tank suction (crude oil, finished products)

  • Tanker unloading to storage tanks (bottom or top unloading)

  • Refinery tank farm product transfer (between tanks or to process units)

  • Chemical tank farm transfer (with appropriate materials)

  • Industrial water sumps (cooling water, firewater retention pits)

  • Barge and ship tank stripping (final suction from tanks)

  • Pipeline tank suction boosters (feeding main pipeline pumps)

Frequently Asked Questions (FAQ)

Q: What is the difference between VS1 (diffuser) and VS2 (volute)?
A: VS1 uses a diffuser (no volute) – better for very low NPSH (cavitation‑prone liquids) and typically slightly higher efficiency. VS2 uses a conventional volute casing – simpler, more rugged, easier to clean and repair, and preferred for petroleum products at ordinary NPSH levels. For most tank transfer of crude oil, diesel, gasoline, VS2 is the standard choice.

Q: Can I install your VS2 pump directly on top of an atmospheric storage tank?
A: Yes. The VS2 is specifically designed for tank top flange mounting. The column extends down into the tank, and the volute suction is near the tank bottom. You must provide a suitable mounting plate and ensure the tank roof can support the pump weight. A bottom guide bearing or suction strainer is often used.

Q: How are the intermediate shaft bearings lubricated?
A: By the pumped liquid. For clean petroleum products (diesel, gasoline, light crude), this is fine. For heavier or dirtier products, we can provide external clean flush or a different bearing material (e.g., carbon or PTFE). For very dirty service, consider a different pump type.

Q: What happens if my tank level drops below the pump suction?
A: The pump will lose prime and run dry, damaging the shaft bearings and mechanical seal. We provide minimum liquid level guidelines and recommend a level switch or low‑level cutout to protect the pump.

Q: Can I use your VS2 pump for gasoline (low flash point)?
A: Yes, with explosion‑proof motor and proper sealing at the top (mechanical seal with appropriate API 682 seal plan, e.g., Plan 11 + 52 for volatile hydrocarbons). All wetted materials must be suitable for the specific hydrocarbon.

Q: Do you supply the complete top mounting plate and discharge piping?
A: Yes, we can supply the complete assembly: top plate (with mounting flange), discharge elbow/header, column pipe with intermediate bearings, volute casing with impeller, and shaft coupling. The customer typically provides the tank opening and motor.

Why Choose Us as Your China VS2 Pump Supplier

  • Extensive experience with tank top mounted vertical pumps for petroleum service

  • Volute hydraulics optimized for crude oil, diesel, gasoline and similar products

  • True one‑stop service – from tank depth measurement to on‑site installation

  • Competitive pricing – typically 30‑40% lower than European/US VS2 suppliers

  • Fast after‑sales support – local China response, global spare parts

  • Custom shaft lengths – we build exactly your tank height and required submersion

  • Complete documentation – NPSH curves, performance curves, bearing spacing calculation, material certificates, explosion‑proof certification as required

Contact Us

For inquiries, technical support, or a custom quotation for our China VS2 pump (vertical submerged, single‑stage volute, long shaft, tank top installation, petroleum products), please contact us at:
info@hyrig.com

Choose our China VS2 pump – rugged volute simplicity, tank top convenience, and reliable transfer for petroleum products.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit