We are a professional China VS1 pump manufacturer, offering high‑quality API 610 compliant vertical submerged single‑stage diffuser type pumps. Our VS1 series features a single casing, long shaft with multiple intermediate bearings, and a diffuser (no volute) hydraulic design. The pump is suspended vertically with the suction end immersed in the liquid. Because there is no volute and the flow is guided by diffuser vanes, the VS1 achieves excellent suction performance and is highly resistant to cavitation. This makes it the ideal choice for deep sumps and tanks, tank feed and transfer from underground storage, and cavitation‑prone liquids such as light hydrocarbons, refrigerants, and hot water.
What is a VS1 Pump?
According to API 610, the VS1 pump is a vertical suspended, single‑stage, diffuser type, single‑casing, submerged pump. Key characteristics:
Vertical suspended design – the pump is mounted on a top plate and suspended into the liquid; no foot valve required.
Diffuser type (no volute) – liquid is guided from the impeller through stationary diffuser vanes, providing smooth flow and superior NPSH characteristics compared to volute pumps.
Long shaft with intermediate bearings – for deep submersion (e.g., 3–15 meters or more), the shaft is supported by multiple sleeve bearings along its length to prevent vibration.
Single casing – only the pump hydraulics (impeller + diffuser) are submerged; there is no outer barrel (unlike VS6). The discharge column extends up to the surface plate.
Excellent for low NPSHa – the diffuser design, combined with the submerged vertical orientation, allows operation with very low net positive suction head available, making it ideal for cavitation‑prone fluids.
Why Choose Our China VS1 Pump?
When you search for a reliable China VS1 pump manufacturer, you need a supplier who understands deep‑sump hydraulics, long shaft dynamics, and cavitation resistance. Our VS1 pumps are engineered for:
Deep submerged depths (typically 2–15 meters, more on request)
Tank feed from underground or atmospheric storage
Liquids with low NPSH available (cavitation‑prone: light ends, hot water, condensate, refrigerants)
No volute, diffuser guided flow – smoother, more efficient, lower vibration
Long shaft with intermediate sleeve bearings – stable operation even with considerable submersion depth
Simple single casing construction – easy maintenance compared to multistage barrel VS pumps
Designed for Typical Working Conditions
Our China VS1 pumps run reliably in:
Deep sumps, pits, and underground tanks (fixed or floating suction)
Tank truck unloading and tank farm transfer (suction lift eliminated by submerged design)
Low NPSH services: light hydrocarbons (propane, butane, LNG), hot condensate, hot water, refrigerants
Water intake from rivers or reservoirs (vertical pump installation)
Industrial process sumps where liquid level fluctuates
Continuous 24/7 operation with deep submersion
Compatible Media
The VS1 pump handles clean or slightly dirty liquids, particularly those prone to cavitation:
Light hydrocarbons (propane, butane, ethane, light petrol, NGL)
Condensate (low subcooling)
Hot water, boiler feed water (high temperature)
Refrigerants (ammonia, Freon substitutes)
Water, cooling water (deep intake)
Mild chemicals (with appropriate stainless steel materials)
**Avoid abrasive or fibrous liquids – long shaft intermediate bearings and close diffuser clearances are sensitive to solids.
Key Technical Features
Standard: API 610 (11th edition), API 682 for mechanical seals (at the top, above liquid)
Design: Vertical suspended, single‑stage, diffuser type, single casing, long shaft with intermediate bearings
Casing: No volute – diffuser vanes around impeller
Submersion depth: Standard 2–15 meters; deeper on request (requires additional shaft bearings)
Flow: 10 – 2000 m³/h (customizable; typical 50‑1000 m³/h)
Head: Up to 150 meters (single‑stage; higher stages available as VS6 for multistage)
Temperature: -40°C to +200°C (depending on shaft bearing material and top seal)
Materials: Carbon steel, stainless steel (304, 316, duplex), bronze (for bearings)
Intermediate bearings: Sleeve type (liquid lubricated by pumped fluid)
Flanges: Discharge at top plate – ANSI, ASME, DIN, JIS
Shaft sealing: Gland packing or mechanical seal at the top (above liquid level) per API 682
Column pipe: Flanged or threaded, supports shaft bearings
Product Advantages
Cavitation resistant – the submerged diffuser design provides excellent NPSH characteristics, allowing operation with very low NPSHa.
Deep sump capability – long shaft with multiple lubricated intermediate bearings enables reliable submersion up to 15 meters or more.
No volute – smooth, quiet operation – diffuser vanes convert velocity to pressure more smoothly than volutes, reducing noise and vibration.
Eliminates suction lift problems – pump is submerged, so no priming or suction lift limitations; ideal for intermittent or variable liquid levels.
Single casing simplicity – easier and lower cost than double‑casing vertical pumps (VS6) for moderate head applications.
API 610 reliability – designed for continuous heavy‑duty service in refineries, chemical plants, and storage terminals.
Flexible installation – can be mounted on concrete pits, steel tanks, or directly over sumps.
One‑Stop Full Service
As a leading China VS1 pump manufacturer, we provide a complete one‑stop service for vertical submerged pumps:
Selection & NPSH calculation – we verify that the VS1 will operate cavitation‑free at your available NPSH.
Custom shaft length & intermediate bearing spacing – engineered for your exact submerged depth.
Manufacturing – precision machining of diffuser, impeller, and long shaft assembly; dynamic balancing.
Factory testing – hydrostatic test, performance test, NPSH test (simulated), long shaft runout check.
Delivery – lead time for standard VS1 pumps: 12‑20 weeks; expedited possible.
Installation & commissioning – on‑site guidance for vertical alignment, mounting plate levelling, column assembly.
After‑sales – complete spare shaft with bearings, impeller, diffuser, wear rings, top seal parts, field service.
Main Applications
Tank farm suction from underground storage (crude, refined products, chemicals)
Barge and tanker unloading (liquid cargo)
Refinery sumps and pit drainage (recovery of hydrocarbons)
Light ends transfer (propane, butane, LPG) – low NPSH requirement
Condensate recovery pits at power plants and refineries
Hot water return sumps (where NPSH is limited)
Chemical plant tank feed from underground or deep reactors
River / reservoir water intake (vertical pump)
Industrial wastewater sumps (clean water)
Frequently Asked Questions (FAQ)
Q: What is the main difference between VS1 and VS6 pumps?
A: VS1 is a single‑casing, single‑stage diffuser pump. The pump hydraulics are submerged; the column pipe carries the shaft. VS6 is a double‑casing, multistage diffuser pump with an outer barrel and internal bowl assembly, used for much higher heads (many stages). Choose VS1 for single‑stage moderate head, deep submersion, and low NPSH; choose VS6 for high head multistage vertical service.
Q: Why does the VS1 have no volute?
A: Diffuser type pumps (no volute) are inherently better for low NPSH applications. The diffuser vanes guide flow smoothly from the impeller, reducing turbulence and suction recirculation. This improves suction performance and allows the pump to handle cavitation‑prone liquids.
Q: How are the intermediate shaft bearings lubricated?
A: The pumped liquid itself lubricates the intermediate sleeve bearings. That is why the VS1 is only suitable for clean or slightly dirty liquids. Abrasive solids will quickly wear the bearings. For dirty liquids, we recommend an external flush or a different pump type.
Q: What happens if the liquid level drops below the first bearing?
A: The pump must remain submerged at least to the minimum operating level specified (usually above the suction bell). If the level drops too low, the upper intermediate bearings can run dry and fail. We provide low‑level protection recommendations.
Q: Can I use your VS1 pump in a Class 1 hazardous area?
A: Yes. The motor and top bearing/seal area are above the liquid and can be specified as explosion‑proof (NEMA / ATEX / China Ex). The submerged parts are fully enclosed and pose no ignition risk.
Q: Do you supply the complete column pipe and discharge head assembly?
A: Yes. We supply the entire package: suction bell, impeller/diffuser bowl, column pipe with intermediate bearings, discharge head (with stuffing box or mechanical seal), motor mounting plate, and coupling. You provide the motor and pit.
Why Choose Us as Your China VS1 Pump Supplier
Deep engineering experience in vertical submerged pumps with long shafts
Proven diffuser hydraulics for low NPSH and cavitation‑free operation
True one‑stop service – from NPSH analysis to on‑site pit installation
Competitive pricing – typically 30‑40% lower than Western VS1 specialists
Fast after‑sales support – local China response, global spare parts
Custom shaft lengths – we build exactly your submersion depth
Complete documentation – NPSH curves, performance curves, bearing spacing calculation, material certificates
Contact Us
For inquiries, technical support, or a custom quotation for our China VS1 pump (vertical submerged, single‑stage diffuser, long shaft, tank feed, cavitation‑prone media), please contact us at:
info@hyrig.com
Choose our China VS1 pump – vertical submersion simplicity, diffuser low‑NPSH performance, and reliable deep tank feed for cavitation‑prone liquids.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.