The Sulzer ZPP series is a vertical, multistage centrifugal pump designed to API 610 Type VS6 or VS1. It is specifically engineered for fire jockey (pressure maintenance) duty – maintaining system pressure in firewater ring mains to prevent unnecessary starting of the main fire pump. The ZPP handles small flows (typically 5–50 m³/h) at high heads (up to 300+ metres) with exceptional efficiency and reliability.
Two Configurations for Different Installations
The ZPP series is unique in offering both VS6 and VS1 configurations within the same hydraulic platform:
VS6 Standard Configuration – Short-Coupled Vertical Multistage
The pump and driver (electric motor) are directly coupled with a short shaft. The motor is mounted above the liquid level, while the pump hydraulics remain submerged in a tank, wet pit, or basin. This configuration is ideal for land‑based jockey pump installations where the water source is a shallow tank or a below‑grade pit. No long intermediate shaft – compact, easy to maintain.
VS1 Long-Shaft Configuration – Deep Well / Deep Pit
The pump bowl assembly is suspended at the bottom of a deep well or caisson, connected to the above‑grade motor by a long drive shaft with intermediate sleeve bearings. Liquid is discharged via a vertical riser pipe. This configuration is used when the water source is deep (e.g., deep borehole, deep seawater caisson) but a jockey pump is still required for pressure maintenance.
API 610 VS6 Core Features (Standard Configuration)
Vertical suspended, single‑case, multistage diffuser design.
Motor directly coupled to the pump – no long shaft.
Pump hydraulics immersed in liquid; motor remains dry above grade.
Ideal for shallow tanks, reservoirs, or pits.
API 610 VS1 Core Features (Long-Shaft Configuration)
Vertical suspended with a long drive shaft (immersion depth up to 30m).
Intermediate sleeve bearings for shaft support.
Pump bowl assembly at the bottom; motor on top platform.
Discharge through a column pipe.
Multistage Hydraulic Design
The ZPP series uses multiple impellers and diffuser bowls stacked in series. Each stage adds pressure incrementally, allowing a compact pump to achieve very high heads at low flows – exactly what a fire jockey pump requires. Models such as ZPP65-160×3, ZPP80-125×4, and ZPP100-200×2 indicate three, four, or two stages respectively.
Materials
Standard wetted parts: cast iron or ductile iron for fresh water / light industrial firewater. Optional bronze‑fitted, stainless steel (316), or duplex stainless steel for seawater or brackish water. Mechanical seals are carbon/silicon carbide with EPDM or FKM elastomers.
Key Advantages for Fire Jockey Duty
High head at low flow – precisely matches NFPA 20 pressure maintenance requirements.
Low NPSH – optimised first‑stage impeller minimises cavitation risk when the tank level is low.
Quiet, vibration‑free operation – vertical multistage design runs smoother than many horizontal alternatives.
Flexible configuration – choose VS6 for shallow pits or VS1 for deep wells without changing pump hydraulics.
Compact footprint – vertical orientation saves valuable floor space in pump rooms.
Typical Applications
Land‑based refinery firewater jockey pumps
Petrochemical plant pressure maintenance systems
Power station fire jockey pumps
Near‑shore LNG terminals (seawater jockey duty with duplex materials)
High‑rise building booster / jockey pump sets (NFPA 20 compliant)
Compliance
Certified to API 610 (ISO 13709), NFPA 20, and optionally FM/UL. Available with electric motor or diesel engine drive, explosion‑proof motor for hazardous areas, and full factory acceptance testing.
Selection Guide: VS6 vs VS1 for ZPP
| Condition | Recommended Configuration |
|---|---|
| Water source is a shallow tank, pit, or basin (depth <3m) | VS6 (short-coupled) |
| Water source is a deep well or caisson (depth >5m) | VS1 (long-shaft) |
| Low available NPSH – need motor above liquid but short shaft | VS6 with optimised suction |
| Existing deep caisson requires drop‑in pump | VS1 |
Why Sulzer ZPP for Your Fire Jockey Duty?
Unlike many jockey pumps that are built to non‑API standards, the ZPP series meets full API 610 requirements – meaning robust bearing housing, heavy‑duty shaft, and high reliability. The multistage vertical design delivers the required high pressure without needing a large‑diameter impeller or excessive motor power. With both VS6 and VS1 options, the ZPP series adapts to your site's water source without changing the pump core.
For complete technical datasheets (ZPP65-160×3, ZPP80-125×4, ZPP100-200×2), sizing assistance, or a quotation, please contact us at info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.