We are a professional China BB4 pump manufacturer, offering high‑quality API 610 compliant segmental multistage radially split centrifugal pumps. Our BB4 series features a single casing, radially split design with segmental (stage‑by‑stage) construction. Each stage consists of a diffuser and impeller, stacked together and clamped by tie‑bolts or a through‑bolt arrangement inside a cylindrical outer casing. The rotor is supported by bearings at both ends (between‑bearings). This mature, robust construction has been proven over decades in high pressure services. The BB4 is the preferred choice for high pressure chemical processes, boiler feed water, oilfield injection water, and refinery multistage duties where pressures exceed the practical limit of horizontally split casing designs.
What is a BB4 Pump?
According to API 610, the BB4 pump is a horizontal, single‑casing radially split, segmental multistage, between‑bearings pump. Key characteristics:
Segmental (stage‑by‑stage) construction – individual stages (diffuser + impeller) are stacked axially and clamped together within a single outer casing. This allows flexible stage count and achieves very high pressures.
Radially split single casing – the casing is cylindrical and radially split (end‑to‑end), not horizontally split. The entire internal assembly can be removed as a cartridge.
Between‑bearings support – bearings are located at both ends of the shaft, providing excellent rotor stability for long, multistage rotors under high pressure.
High pressure capability – typically up to 30 MPa (Class 1500–2500), much higher than axially split BB3 pumps.
Why Choose Our China BB4 Pump?
When you search for a reliable China BB4 pump manufacturer, you need a supplier who understands the demanding nature of segmental multistage pumps and provides API 610 quality at a competitive price. Our BB4 pumps are engineered for:
High pressure multistage duties (typically 200–2500+ meters head, up to 30 MPa)
Chemical process services (high pressure feed, reactor circulation, pipeline boosting)
Oilfield injection water (high pressure secondary recovery, produced water injection)
Boiler feed water (high pressure industrial and power plant service)
Mature, field‑proven segmental construction – easy stage count customization, robust sealing between stages
Stable rotor dynamics with between‑bearings support – suitable for continuous heavy‑duty operation
Designed for Typical Working Conditions
Our China BB4 pumps run reliably in:
High pressure chemical processes (ammonia, urea, methanol synthesis feed)
High pressure water injection for oilfields (clean or filtered produced water)
Boiler feed water (medium to high pressure, up to 20 MPa+)
Desalination high pressure feed (reverse osmosis, often paired with BB5 for very high pressure)
Refinery high pressure hydrocarbon streams (naphtha, LPG, light ends)
Pipeline pressure boosting (liquid pipelines requiring high differential pressure)
Continuous 24/7 operation under high shaft loads and high pressure
Compatible Media
The BB4 pump handles clean or moderately clean liquids, including:
High pressure water (boiler feed, injection water, descaling water)
Light hydrocarbons (low viscosity, high pressure)
Chemical process fluids (with suitable stainless steel, duplex, or alloy materials)
Condensate (high pressure return systems)
Amine solutions, lean/rich oil (refinery gas treating)
Oilfield produced water (filtered, non‑abrasive)
**Avoid abrasive or dirty fluids – segmental pumps have tight inter‑stage clearances and are sensitive to solids.
Key Technical Features
Standard: API 610 (11th edition), API 682 for mechanical seals
Design: Horizontal, single‑casing radially split, segmental multistage, between‑bearings
Construction: Stacked impellers and diffusers clamped by tie‑bolts or through‑bolts inside outer barrel
Flow: 10 – 800 m³/h (typical range 30‑500 m³/h)
Head: Up to 3000 meters (depending on number of stages and speed)
Pressure rating: Up to 30 MPa (Class 1500, 2500; higher on request with special design)
Temperature: -40°C to +200°C (higher with special gaskets and materials)
Stages: 2 to 12+ (custom, more stages possible with longer casing)
Materials: Carbon steel (WCB, LCC), stainless steel (304, 316, duplex, super duplex), chrome steel (high temp), alloy 20, Hastelloy on request
Flanges: ANSI, ASME, DIN, JIS (typically Class 600 to 2500)
Bearings: Sleeve or tilt‑pad bearings (oil lubrication, forced or ring oil)
Shaft sealing: Mechanical seals per API 682 (single, double, tandem) with appropriate seal support systems
Casing joint: Metal‑to‑metal or spiral wound gaskets with controlled compression
Product Advantages
High pressure capability – segmental construction can achieve much higher pressures than horizontally split (BB3) designs.
Flexible stage count – we can add or remove stages to exactly match your head requirement, using the same basic outer casing.
Robust inter‑stage sealing – each stage is individually sealed, minimizing internal leakage.
Between‑bearings stability – excellent rotor dynamics for long, high‑speed rotors; lower vibration at high pressures.
Mature, proven technology – BB4 segmental pumps have operated reliably in refineries, chemical plants, and oilfields for decades.
Cost‑effective for high pressure – lower cost than barrel‑type BB5 pumps for many medium‑high pressure applications (up to 30 MPa), while offering similar pressure capability.
Cartridge assembly – the complete internal rotating element and stage stack can be removed as a cartridge for maintenance, though piping must be disconnected (unlike horizontal split designs).
One‑Stop Full Service
As a leading China BB4 pump manufacturer, we provide a complete one‑stop service for segmental multistage pumps:
Selection & hydraulic design – we determine the optimum number of stages, impeller trims, and material grades for your pressure, temperature, and corrosivity requirements.
Custom design – stage count, high pressure flanges, special alloys, API 682 seal plans, material certifications (NACE, etc.).
Manufacturing – precision machining of diffuser and impeller stacks, dynamic balancing of long rotors, hydrostatic testing of each stage.
Factory testing – full performance test (head, flow, efficiency), NPSH test, vibration and bearing temperature monitoring, high pressure hydrostatic test.
Delivery – lead time for standard BB4 pumps: 16‑26 weeks; expedited possible for common configurations.
Installation & commissioning – on‑site supervision, alignment, startup assistance, including seal flush system setup.
After‑sales – complete spare rotor, stage components, bearings, mechanical seals, gaskets, field repair and overhaul service.
Main Applications
High pressure chemical process pumps (ammonia, urea, methanol, petrochemical feed)
Oilfield water injection (secondary recovery, produced water injection)
Boiler feed water pumps (industrial boilers, small to medium power plants)
High pressure reverse osmosis feed (brackish water, seawater desalination)
Hydrocarbon high pressure transfer (LPG, light naphtha, feed to reactors)
Mine dewatering (very high head, clean water)
High pressure descaling (steel mills)
Refinery high pressure wash water and process streams
Frequently Asked Questions (FAQ)
Q: What is the difference between BB3 (horizontal split) and BB4 (segmental radial split)?
A: BB3 has a horizontally split casing – the top half lifts off without disturbing piping. It is easier to maintain but limited to lower pressures (typically ≤10 MPa / Class 600). BB4 has a segmental radially split single casing – all stages are stacked inside a cylindrical outer casing. It can handle much higher pressures (up to 30 MPa or more) but requires full disassembly of the outer casing and piping for internal access. Choose BB4 when you need high pressure; choose BB3 for medium pressure with easier maintenance.
Q: How is BB4 different from BB5 (barrel pump)?
A: Both are radially split and high pressure. BB4 uses a single casing designed as a cylindrical pressure vessel containing the stacked stages. BB5 is a double‑casing barrel pump – there is an inner cartridge (similar to BB4 internals) inside a heavy outer barrel. BB5 is used for extremely high pressures (up to 50–100 MPa) and for very hazardous or high temperature services because the outer barrel contains any leakage. For most high pressure duties up to 30 MPa, BB4 is more cost‑effective.
Q: Can I inspect or replace individual stages without removing the entire pump from the piping?
A: No. Because the BB4 is radially split, you must disconnect suction and discharge piping and remove the outer casing to access the internal stage stack. However, the internal cartridge can be pulled horizontally for workshop overhaul. This is standard for high pressure segmental pumps. For applications requiring frequent internal access, consider BB3 if pressure allows.
Q: Is your BB4 pump suitable for oilfield water injection at 25 MPa?
A: Yes, our BB4 pumps are regularly supplied for water injection duties up to 30 MPa. We will select the appropriate stage count, materials (usually carbon steel or 316SS), and API 682 mechanical seals with a suitable seal support system (Plan 11 + 52 or 53B, depending on injection water quality). Ensure the water is filtered to avoid abrasive wear on stage clearances.
Q: How do you prevent leakage between stages in a BB4 pump?
A: Each stage has precision‑machined diffuser and impeller components with controlled axial and radial clearances. The entire stack is clamped under a calculated preload, often with metal‑to‑metal seals or O‑rings between stages. Proper assembly torque is critical. We perform hydrostatic and stage‑by‑stage pressure tests during factory acceptance.
Q: Do you offer NACE compliant materials for sour service?
A: Yes. We can supply BB4 pumps with NACE MR0175 / MR0103 compliant materials (carbon steel with hardness control, stainless steel, duplex, etc.) for sour hydrocarbon or injection water containing H₂S. Please specify your service conditions.
Why Choose Us as Your China BB4 Pump Supplier
Extensive experience in segmental multistage high pressure pumps – both BB4 and BB5 designs
True one‑stop service – from stage count calculation and pressure rating to on‑site high pressure commissioning
Significant cost savings – typically 30‑40% lower than European/US brands while maintaining API 610 compliance
Fast after‑sales support – local China engineering response, global spare parts logistics
Flexible stage count – we build exactly the number of stages needed, not forcing you into standard stage counts
Complete documentation – performance curves, stage‑by‑stage data, NPSH, vibration & temperature records, pressure test certificates, material certifications (EN 10204 3.1)
Contact Us
For inquiries, technical support, or a custom quotation for our China BB4 pump (segmental multistage, high pressure, chemical process, injection water), please contact us at:
info@hyrig.com
Choose our China BB4 pump – mature segmental construction, high pressure capability, and reliable service for chemical processes and oilfield injection water.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.