The LG series (also known as LDT or LG‑VS1) is an API610 (10th/11th edition) compliant VS1 vertical suspended single‑casing diffuser barrel pump, specifically engineered for tank farm and storage terminal applications handling volatile, flammable, and low net positive suction head available (NPSHa) liquids such as solvents, light hydrocarbons, LPG, and cryogenic fluids. Its submerged impeller design eliminates priming and effectively prevents cavitation, making it the preferred choice for low liquid level, high vapor pressure, and hazardous area service.
Gasoline, diesel, naphtha, toluene, xylene, methanol, ethanol, acetone, ethyl acetate, acetic acid, LPG, propylene, ammonia, light hydrocarbons, low‑temperature solvents (clean, no solids).
Capacity: 30 – 3000 m³/h
Head: 50 – 1400 m (multistage diffuser design)
Design pressure: up to 15.0 MPa
Temperature: -120°C to +250°C (typical service -40°C to +120°C)
Flange rating: ANSI Class 300 / Class 600 (RF face)
Speed: 1450 / 2950 r/min (prefer 1450 for large flow, low temperature)
Immersion depth: 1 – 12 m (customized per tank geometry)
Vertical suspended, submerged installation – pump and impeller fully immersed in the liquid; no priming required, eliminates air binding and vapor lock.
Single‑casing diffuser barrel with multistage radial diffusers – balanced hydraulic forces, low vibration (≤2.5 mm/s), high efficiency. Multistage design achieves high head without excessive speed.
Extremely low NPSHr – optional first‑stage double suction impeller or inducer reduces NPSHr to 1.5‑2.5 m, enabling safe operation at low liquid levels (NPSHa <3‑5 m) with volatile solvents (methanol, LPG, etc.).
Rigid long shaft with multiple line bearings – large diameter hollow shaft, deflection ≤0.02 mm. Product‑lubricated hydrodynamic bearings support shaft spans up to 12 m. Thrust bearing (oil lubricated) handles axial load.
API682 cartridge mechanical seal – located at the top above liquid level. SiC/graphite/FKM/PTFE components. Standard flush Plans 11/21/52/53 as per duty – zero leakage for flammable, toxic, or environmentally sensitive liquids.
Explosion‑proof and anti‑static design – Ex d IIB T4 motor, anti‑static grounding, full compliance with hazardous area codes (Zone 1/Zone 2).
Corrosion resistant materials – 316L, duplex, or WCB depending on fluid corrosivity.
Casing / diffuser: 316L (standard solvents), duplex (chloride/acidic), WCB (light hydrocarbons).
Impeller / shaft sleeve: 316L, duplex, wear‑resistant alloy.
Mechanical seal: API682 cartridge (SiC/graphite/PTFE), metal bellows for low‑high temperature.
Bearings: Product‑lubricated line bearings + oil‑lubricated thrust bearing with PT100 temperature monitor.
NACE MR0175 available.
✔︎ True API610 VS1 – designed specifically for low NPSH, vertical tank farm applications; globally proven.
✔︎ No priming, no cavitation – submerged impeller ensures continuous, stable operation even at very low tank levels.
✔︎ Extremely low NPSHr – first‑stage double suction/inducer down to 1.5‑2.5 m, safe for volatile solvents and LPG.
✔︎ High head multistage capability – up to 1400 m, ideal for long‑distance pipeline transfer from tank farms.
✔︎ Zero leakage, safe for hazardous areas – API682 seal with appropriate flush plan + explosion‑proof motor + anti‑static grounding.
✔︎ Compact footprint – vertical design saves valuable tank farm real estate.
✔︎ Cost‑effective domestic alternative – 40‑60% lower cost than imported VS1 pumps (Flowserve, Sulzer, KSB), same API610 compliance, 12‑16 weeks delivery.
✔︎ Proven in refineries, petrochemical tank farms, LPG terminals, and chemical storage units – references from Sinopec, CNPC, Zhejiang Petrochemical.
| Feature | LG (VS1 Vertical Barrel) | OH2 / BB2 Horizontal |
|---|---|---|
| Priming | Not required | Required (risk of vapor lock) |
| NPSHr | Very low (1.5‑2.5 m) | Higher (3‑8 m) |
| Cavitation risk | Negligible | High at low NPSHa |
| Suction lift | None (pump submerged) | Requires lift from tank |
| Leak safety | Seal above liquid, leaks drain back | Seal leaks spray at grade |
| Footprint | Small (vertical) | Large (horizontal baseplate) |
| Maintenance | Requires crane for cartridge pull‑out | Accessible without crane |
| Best application | Low NPSHa, volatile, high vapor pressure, low liquid level | High NPSHa, routine transfer, higher flow/pressure |
Light ends / LPG / propylene (‑40°C to +60°C, low level) – VS1 with inducer / double suction first stage + low temp metallurgy + Plan 53A seal.
Methanol, ethanol, acetone (ambient, NPSHa 2‑3 m) – VS1, 316L, double suction first stage, Plan 52 seal, 1450 rpm.
Aromatics (toluene, xylene, 40‑80°C) – VS1, 316L or WCB, standard first stage, Plan 11/52 seal.
High head long‑distance transfer (≥250 m) – VS1 multistage (4‑8 stages), 1450 rpm, 316L.
Chlorinated solvents (dichloromethane, etc.) – duplex metallurgy + Plan 53A seal.
Spare parts for VS1 vertical barrel pumps, LPG loading, solvent transfer, tank drainage
12‑16 weeks delivery for engineered VS1 pumps (custom immersion depth, stage count)
Full documentation: performance curves, NPSH test reports, dynamic balance report, material certificates (EN10204 3.1), hydrotest, API682 cert, NACE (if required)
Long‑term service agreement, on‑site installation supervision, and technical support
For API610 VS1 vertical barrel pump datasheet, low NPSH tank farm quotation, or LPG/solvent transfer project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.