A condensate recovery pump (also known as a steam condensate pump or condensate return pump) is a critical component in steam systems, power plants, refineries, petrochemical plants, and industrial heating processes. Its primary function is to collect hot condensate – the liquid water formed when steam releases its latent heat – from steam traps, heat exchangers, and condensate collection tanks, and then transfer it back to the boiler feedwater system or deaerator. Recovering condensate saves energy, reduces water treatment costs, and minimises blowdown losses.
Condensate recovery is particularly challenging because the fluid is hot (typically 80‑150°C, sometimes up to 200°C), may contain flash steam (two‑phase flow), and has very low Net Positive Suction Head available (NPSHa) under atmospheric conditions. Standard centrifugal pumps often cavitate or lose mechanical seal life when pumping hot condensate. Our API 610 condensate recovery pumps are specifically engineered for high‑temperature, low‑NPSH service, fully compliant with API 610 11th/12th edition (ISO 13709) – ensuring 20‑year design life and minimum 3‑year uninterrupted operation.
| Pump Type | API 610 Type | Best Condensate Service |
|---|---|---|
| OH2 | Overhung, centreline‑mounted, single‑stage | Standard condensate return from hotwell or tank to deaerator (heads ≤150 m) |
| BB3 | Axially split, single casing, multistage, between bearings | High‑head condensate transfer to elevated deaerator or boiler feed system (heads up to 400 m) |
| VS4 | Vertical suspended sump / can type | Low NPSHa installations (e.g., below‑grade condensate pit); space‑constrained or fire‑code requirements |
The OH2 configuration is the most common for hot condensate duty. Characteristics include:
Single‑stage overhung impeller, centreline mounted – accommodates thermal expansion of hot condensate (up to 200°C).
Back pull‑out design – rotating assembly removable without disturbing piping.
API 610 bearing housing with heavy‑duty bearings; L10 life ≥25,000 hours.
Flow range: 5 – 600 m³/h; head range: 20 – 150 m (higher with special hydraulics).
Air‑cooled bearing housing fins (or water‑cooled option for high ambient temperatures).
When condensate must be pumped to a deaerator located on a mezzanine or roof, BB3 multistage pumps provide:
Higher head (up to 400 m) in a compact footprint.
Opposed (back‑to‑back) impellers – axial thrust self‑balancing, no balance disc or drum to wear.
Removable upper casing half – rotor access without disturbing piping.
Flow up to 600 m³/h, temperature up to 200°C.
In plants where the condensate collection tank is below grade and NPSHa is very limited (e.g., 1‑2 meters), the VS4 vertical sump pump offers:
Suction bell submerged in the pit – inherent NPSH advantage.
Pump column length customised to pit depth.
Motor above grade for easy access.
Single or multistage to match head requirements.
| Parameter | OH2 | BB3 | VS4 |
|---|---|---|---|
| Flow range | 5 – 600 m³/h | 20 – 600 m³/h | 10 – 500 m³/h |
| Head range | 20 – 150 m | 50 – 400 m | 15 – 120 m |
| Max temperature | 200°C | 200°C | 180°C |
| Pressure rating | Up to 40 bar | Up to 60 bar | Up to 25 bar |
| Speed | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm |
Condensate is typically deaerated but can be slightly acidic (low pH) due to dissolved CO₂. It may also contain ammonia, chlorides, or oxygen if not properly treated. Material selection must resist corrosion and handle thermal expansion.
| Component | Standard material | Upgrade option |
|---|---|---|
| Casing | Carbon steel (C‑6) | 316L SS (S‑8) |
| Impeller | Carbon steel or 304 SS | 316L SS, duplex |
| Shaft | 4140 hardened steel | 316 SS, 17‑4 PH |
| Wear rings | Hardened 4140 | 316L SS + Stellite |
| Gaskets | Spiral wound graphite | PTFE / Grafoil |
For aggressive condensate (e.g., with chlorides or low pH), specify 316L stainless steel (S‑8) . For boiler feed condensate with strict iron content limits, stainless steel wetted parts prevent rust contamination.
Hot condensate requires specialised sealing to prevent flashing, dry running, and seal face damage. API 682 provides two standard arrangements:
Plan 23 – Recirculation with cooling (standard for OH2/BB3):
A closed loop circulates liquid from the seal chamber through an external cooler and back.
Maintains seal face temperature well below boiling point.
Recommended for continuous high‑temperature condensate service (>80°C).
Plan 21 – Cooled flush from pump discharge (simpler alternative):
Takes hot condensate from pump discharge, passes through a cooler, then injects into seal chamber.
Lower cost but relies on system pressure.
| Service | Recommended API 682 arrangement | Plan | Remarks |
|---|---|---|---|
| Hot condensate (80‑150°C) | Single seal (Arrangement 1) | Plan 23 (recirculation cooler) | Standard – maintains cool seal environment |
| Hot condensate with low NPSHa | Single seal (Arrangement 1) | Plan 23 | Prevents flashing |
| H₂S‑containing or toxic condensate | Dual pressurised | Plan 53B | Zero emissions, barrier fluid > process |
| Intermittent / standby service | Single seal with quench | Plan 23 + Plan 62 | Extra safety during dry starts |
Seal faces: Silicon carbide vs. carbon (standard) ; for abrasive condensate (e.g., with iron oxide particles), specify silicon carbide vs. silicon carbide. Elastomers: Viton (FKM) for up to 200°C.
Condensate recovery pumps often take suction from a hotwell or collection tank operating at near‑atmospheric pressure. The liquid temperature is high, so the vapour pressure is close to atmospheric. Available NPSHa is typically only 2‑4 metres (vertical liquid level above pump centreline). Low NPSHa leads to cavitation, impeller damage, and seal failure.
Our solutions for low NPSH:
Large‑eye first‑stage impeller – standard on OH2 and BB3 pumps, reduces NPSHr.
Inducer – axial flow stage before first impeller, lowers NPSHr by 40‑60%.
Double‑suction first stage – available on larger OH2 pumps, reduces inlet velocity.
VS4 vertical sump pump – completely eliminates NPSH by submerging the impeller in the pit.
Rule of thumb: Ensure NPSHa ≥ NPSHr + 1.0 m per API 610. For condensate near boiling point, add 1.5‑2.0 m margin because of dissolved gases and flash steam.
Operating a condensate recovery pump below Minimum Continuous Stable Flow (MCSF) causes:
Recirculation at impeller eye – cavitation and vibration.
Temperature rise – fluid may flash.
Seal overheating.
An automatic recirculation valve (ARC) or continuous bypass with orifice must return the required minimum flow to the condensate tank when the main discharge valve is closed.
| Industry | Application | Typical service |
|---|---|---|
| Power generation | Condensate extraction from steam turbine hotwell | High flow, moderate head |
| Refinery | Steam condensate return from process heat exchangers | High temperature, corrosive |
| Petrochemical | Condensate transfer from steam tracing systems | Intermittent, low flow |
| Chemical plant | Hot condensate from evaporators and reboilers | Variable flow, high head |
| District heating | Condensate return from heat exchangers to central plant | Medium flow, continuous duty |
| Paper & pulp | Condensate recovery from dryer cylinders | Abrasive (iron oxide) |
| Food & beverage | Steam condensate from kettles, cookers, sterilizers | Sanitary options |
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours
Critical speed: ≥120% of maximum operating speed
Centreline mounting (OH2/BB3) – essential for hot condensate (>80°C) to allow thermal expansion
Hydrostatic test: 1.5x design pressure
Performance test: Water per API 610 Grade 1 or 2
Material certification: EN 10204 3.1 full traceability
NACE MR0175 available for sour service (if condensate contains H₂S)
API 610 full compliance – OH2, BB3, VS4 – 11th/12th edition ISO 13709, 20‑year life
High‑temperature design – centreline mounting, Plan 23 seal cooling, bearing cooling fins
Low NPSH solutions – inducer, double‑suction first stage, or VS4 vertical sump
316L stainless steel option – prevents rust contamination in high‑purity boiler feed systems
API 682 mechanical seals with Plan 23 – reliable, cooled flush for hot condensate
Modular construction – back pull‑out (OH2), axial split (BB3), withdrawable (VS4) – easy maintenance
Minimum flow protection – ARC or bypass integrated
Field proven – thousands of condensate recovery pumps in power plants, refineries, and industrial steam systems worldwide
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (API 682 Plan 23 ready) | 1 set |
| Bearing set (radial + thrust) | 1 set |
| Wear ring set (casing + impeller) | 1 set |
| Gasket / O‑ring kit (full set) | 1 set |
| Inducer (if fitted) | 1 set |
For detailed selection of the correct condensate recovery pump – including hotwell flow rate and head, condensate temperature and chemistry (pH, chlorides, oxygen), NPSHa calculation, material selection (carbon steel vs. 316L SS), API 682 seal plan (Plan 23 for hot condensate), and complete API 610 data sheet – please contact our engineering team.
Email: info@hyrig.com
Our engineers support power plant, refinery, chemical, and industrial steam system projects worldwide with reliable API 610 condensate recovery pumps – efficient, corrosion‑resistant, and built for high‑temperature condensate service.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.