| Bevel Diameter D (mm) | Limiting Deviation (mm) | Type Thread |
|---|---|---|
| 77.4 | ±0.4 | 2 3/8 REG |
| 91.7 | ±0.4 | 2 7/8 REG |
| 104.4 | ±0.4 | 3 1/2 REG |
| 135.3 | ±0.4 | 4 1/2 REG |
| 165.1 | ±0.4 | 5 1/2 REG |
| 186.9 | ±0.4 | 6 5/8 REG |
| 215.1 | ±0.4 | 7 5/8 REG |
| 242.5 | ±0.4 | 8 5/8 REG |
Data source: Technical data table.
Crossover subs are machined to match the specific pin and box connections required by the customer. The bevel diameter is determined by the larger thread of the two connections. When ordering, specify the exact pin and box connection types (e.g., NC38 Pin × NC46 Box).
The crossover sub is a short-length tubular with a pin on one end and a box on the other. It acts as an adapter between different thread types, allowing the BHA components to be assembled. The thick wall and heat-treated material withstand the torsional and tensile loads during drilling.
Replacing an existing crossover sub? Check these points:
For other BHA components, explore the Drill Collar and Lifting Sub pages.
Need a custom crossover sub? Provide the pin connection, box connection, and required length, and our engineers will manufacture the sub to your exact specifications.
Q: What is the primary function of a crossover sub?
A: It connects two BHA components with different thread types or sizes, adapting the string for continuous drilling.
Q: Do you provide custom thread combinations?
A: Yes, we manufacture crossover subs with custom pin and box combinations based on your requirements.
Q: What material is used?
A: Standard material is AISI 4145H chromium-molybdenum steel, heat-treated for high strength.
Q: How do I determine the correct bevel diameter?
A: The bevel diameter is determined by the larger of the two thread connections. Reference the table above for standard sizes.
Q: What is the typical lead time?
A: Lead time varies by thread combination and quantity. Contact our team for a specific schedule.
Please follow standard industrial safety procedures during installation and maintenance.
For drill string crossover sub selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.