| Basic Size mm | ID mm | Pin Connection | Pin OD mm | Bevel Diameter D1 mm | Elevator Shoulder OD D2 mm | Tong Length Lp mm |
|---|---|---|---|---|---|---|
| 73.0 | 31.8 | NC23 | 79.4 | 76.2 | 111.1 | 250.0 |
| 88.9 | 54.0 | NC31 | 104.8 | 100.4 | 127.0 | 250.0 |
| 158.8 | 68.3 | NC38 | 127.0 | 121.0 | 158.8 | 250.0 |
| 158.8 | 71.4 | NC44 | 152.4 | 144.5 | 168.3 | 250.0 |
| 171.5 | 71.4 | NC46 | 165.1 | 154.8 | 171.5 | 250.0 |
| 184.2 | 71.4 | NC50 | 177.8 | 164.7 | 184.2 | 250.0 |
| 203.2 | 71.4 | NC56 | 196.8 | 185.3 | 203.2 | 250.0 |
| 228.6 | 71.4 | NC61 | 228.6 | 212.7 | 228.6 | 250.0 |
| 254.0 | 76.2 | NC70 | 247.7 | 232.6 | 254.0 | 250.0 |
Data source: Technical data table. Note: Standard thread nipples are marked with an asterisk in the original catalog.*
Lifting subs are machined with a specific elevator shoulder (D2) and tong length (Lp) to ensure safe handling. Verify the elevator size and tong length against your rig equipment before ordering. The standard length is 1200 mm for most sizes.
The lifting sub features a pin connection on one end and an elevator shoulder on the other. The shoulder is designed to support the weight of the drill string or BHA during lifting operations. The AISI 4145H material and heat treatment provide the necessary strength for heavy loads.
Replacing an existing lifting sub? Check these points:
For other drill string components, explore the Drill Collar and Crossover Sub pages.
Need a custom lifting sub? Provide the connection type, required elevator shoulder OD, and load capacity, and our engineers will design and manufacture the sub to your specifications.
Q: What material is used for the lifting sub?
A: It is made from AISI 4145H modified chromium-molybdenum alloy steel, heat-treated for high strength.
Q: Can you manufacture custom lifting subs?
A: Yes, we can manufacture lifting subs with custom dimensions, connections, and elevator shoulders.
Q: What is the standard length of a lifting sub?
A: The standard length is 1200 mm, but custom lengths are available upon request.
Q: Are the threads cold rolled?
A: Yes, threads can be cold rolled, copperized, or phosphated for improved fatigue resistance.
Q: What is the typical lead time?
A: Lead time depends on the connection and elevator shoulder size. Contact our team for a specific schedule.
Please follow standard industrial safety procedures during installation and maintenance.
For lifting sub selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.