Dimensions (Selected sizes, full range from 79.4 mm to 355.6 mm OD)
| Connection | OD mm | ID mm | Length mm | Bending Strength Ratio |
|---|---|---|---|---|
| NC23-31 | 79.4 | 31.8 | 9140 | 2.57:1 |
| NC26-35 | 88.9 | 38.1 | 9140 | 2.42:1 |
| NC31-41 | 104.8 | 50.8 | 9140 / 9450 | 2.43:1 |
| NC38-50 | 127.0 | 57.2 | 9140 / 9450 | 2.38:1 |
| NC46-62 | 158.8 | 71.4 | 9140 / 9450 | 2.63:1 |
| NC50-70 | 177.8 | 71.4 | 9140 / 9450 | 2.73:1 |
| NC56-80 | 203.2 | 71.4 | 9140 / 9450 | 3.02:1 |
| NC61-90 | 228.6 | 71.4 | 9140 / 9450 | 3.17:1 |
| NC70-100 | 254.0 | 76.2 | 9140 / 9450 | 2.81:1 |
Mechanical Properties
| OD Range mm | Min Yield Strength MPa | Min Tensile Strength MPa | Min Elongation % | Hardness HB |
|---|---|---|---|---|
| 70–98.4 | 827 | 896 | 16 | 285-341 |
| 101.6–174.6 | 758 | 827 | 18 | 285-341 |
| 177.8–279.4 | 689 | 758 | 20 | 285-341 |
Data source: Technical data table.
All dimensions are finished machining dimensions. Elevator and slip recesses can be machined to meet API specifications upon request. Verify the connection type and OD clearance before ordering.
The drill collar is the primary component for applying weight on bit (WOB) and maintaining stiffness in the BHA. The thick wall provides high bending resistance to keep the bit stable and prevent hole deviation. AISI 4145H alloy steel is heat-treated to achieve the required strength and hardness, and threads are cold rolled to improve fatigue life.
Replacing an existing drill collar? Check these points before matching:
For MWD/LWD magnetic isolation applications, explore the Non-Magnetic Drill Collar range.
Need help selecting the right drill collar size? Provide your hole size, desired WOB, and adjacent BHA connections, and our engineers will recommend the matching OD and ID.
Q: What material is used for these drill collars?
A: They are made from AISI 4145H modified chromium-molybdenum alloy steel, heat-treated to meet API 7-1 requirements.
Q: What is the maximum outer diameter available?
A: The maximum OD is 14 inches (355.6 mm), subject to connection type and material availability.
Q: Can you machine elevator and slip recesses?
A: Yes, elevator and slip recesses can be machined to meet API specifications upon customer request.
Q: What thread treatments are available?
A: Threads can be cold rolled, copperized, or phosphated. Double-shoulder threads are available.
Q: How do I ensure compatibility with my existing string?
A: Verify the connection type, OD, and ID against your BHA drawing. You can also contact our team with the specific model code you are replacing.
Please follow standard industrial safety procedures during installation and maintenance.
For drill collar selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.