Crude Oil Pump BB2 Model Selection – Complete API 610 Series Technical Specifications

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Crude Oil Pump BB2 Model Selection – Complete API 610 Series Technical Specifications is a comprehensive guide to heavy-duty, between-bearing, centerline-mounted, double‑suction centrifugal pumps for crude oil transfer in refinery feed, oilfield gathering, pipeline boosting, and tank farm applications, featuring single‑stage (head to 450 m) and two‑stage (head to 800 m) options, low NPSHr (≤2.3 m), high efficiency (≥88%), API 682 seals with Plan 11/21/53A, wide material selection (WCB/316L/duplex/chrome‑moly/LCB), and capacity/head ranges up to 7,000 m³/h and 800 m.

Conatct For Details
DetailReview(0)Additional

1. Product Overview

The BB2 Series Crude Oil Pump is a horizontal, radially split, single‑stage / two‑stage, double‑suction, between‑bearing, centerline‑mounted centrifugal pump, strictly designed and manufactured in accordance with API 610 12th Edition (ISO 13709) international standards. It is purpose-built for heavy‑duty applications such as refinery atmospheric/vacuum column feed, oilfield gathering, long‑distance pipeline boosting, and tank farm transfer. This pump is designed for conventional / sour / low‑viscosity heavy crude with viscosity 50–300 mm²/s, trace sand (≤1 mm), temperature -80°C to 450°C, sulfur content ≤3%. It achieves long‑term continuous operation (annual operation rate ≥99.5%) and is a core heavy‑duty equipment for crude oil processing.

Key Advantages over OH2 Overhung Pumps:

  • Between‑bearing support + centerline mounting – high shaft rigidity (SFI ≤0.2), symmetrical thermal expansion, far superior vibration resistance for heavy‑duty crude service.

  • Double‑suction impeller – axial thrust self‑balanced, NPSHr ≤2.3 m (35% lower cavitation risk than single‑suction), suitable for high‑temperature / low‑liquid‑level suction.

  • Double volute + high efficiency hydraulics – design point efficiency ≥88%, combining high flow and low energy consumption for long‑term economic operation.

2. Key Structural Features (Crude Oil Heavy‑Duty Design)

2.1 High‑Efficiency Wear‑Resistant Flow Path

  • Double‑suction closed impeller (channel width 25–30 mm), CFD‑optimized for viscosity 50–300 mm²/s – efficiency ≥88%.

  • Double volute (≥DN80), radial force balance ≤5%, vibration ≤2.0 mm/s – stable long‑term operation.

  • Impeller coated with SUME wear‑resistant coating (≥0.15 mm, HRC ≥55). Wear rings same material as casing (WCB/316L) – tolerant of trace sand.

  • Flush ports provided, impeller clearance 1.5–2.0 mm – reduces recirculation losses.

2.2 Wide‑Service Corrosion‑Resistant Materials

  • Conventional crude: A216 WCB carbon steel / 316L stainless steel – corrosion rate ≤0.02 mm/year.

  • Sour crude (1–3% sulfur): 2205 duplex steel (PREN ≥34) – NACE MR0175 compliant.

  • High temperature (>300°C): Chrome‑moly steel (A351 CF8M) – creep resistant.

  • Low temperature (<-20°C): A352 LCB low‑temp steel – prevents brittle fracture.

  • Shaft: 42CrMo nitrided; shaft sleeve: silicon carbide; gaskets: spiral wound – adaptable to complex conditions.

2.3 Safe Sealing System

  • Standard API 682 Type 21 single mechanical seal (clean crude); Type 22 double seals optional (sour / explosion‑proof).

  • Friction pairs: SiC/graphite or WC/SiC; O‑rings: FKM/FFKM – leakage ≤3 ppm.

  • Flush plans: Plan 11 (self‑flush), Plan 21 (high‑temp cooling), Plan 53A (sour isolation).

  • Full metal grounding (≤10Ω), motor Ex d IIB T4 – ATEX/IECEx compliant.

2.4 Thermally Stable Between‑Bearing Support

  • Centerline mounting + radially split casing – symmetrical thermal deformation, shaft runout ≤0.02 mm, flange load capacity 2× API standard.

  • Heavy‑duty bearing housing: cooling fins (ambient) / water cooling (high temp) – oil temperature ≤75°C. Bearings: angular contact + cylindrical roller, oil bath lubrication – life ≥40,000 hours.

  • Grouted base with drain trough – isolates pipe vibration, suitable for outdoor harsh environments.

3. General Technical Specifications (Crude Oil‑Specific)

ParameterValue
Capacity240 – 7,000 m³/h (main range 500–4,100 m³/h)
Head50 – 800 m (single‑stage ≤450 m, two‑stage ≤800 m)
Operating Temperature-80°C to 450°C (common 40–150°C)
Inlet Pressure0.1 – 2.5 MPa; Outlet Pressure: 2 – 10 MPa
Media CharacteristicsViscosity 50–300 mm²/s, solids ≤1% (≤1 mm), sulfur ≤3%, density 0.85–0.95 g/cm³
Motor Power160 – 2,000 kW (power margin ≥25% for high viscosity)
Speed50Hz: 1,450/2,900 rpm; 60Hz: 1,750/3,500 rpm
Flange RatingClass 150/300/600# (RF, ASME B16.5)
Material OptionsWCB carbon steel, 316L, 2205 duplex, chrome‑moly, A352 LCB
NPSHr≤2.3 m (double‑suction advantage)
Efficiency≥88% (design point)
StandardsAPI 610 12th, API 682, NACE MR0175/ISO 15156, GB/T 3215

4. Global Equivalent Models (API 610 BB2 for Crude Oil)

BrandSeries / ModelsCertificationsKey Parameters (Crude Service)Applications
SulzerBBS / CD seriesAPI 610 BB2, ISO 13709, NACE MR0175Flow ≤7,000 m³/h, head ≤450 m (BBS) / ≤800 m (CD), pressure ≤5 MPa, temp ≤425°C, NPSHr ≤2.3 mRefinery feed, long‑distance pipeline, high‑temp sour crude
FlowserveHDX seriesAPI 610 BB2, ISO 13709, API 682 3rdFlow ≤4,100 m³/h, head ≤450 m, pressure ≤10 MPa, temp ≤450°C, vibration ≤2.0 mm/sLong‑distance pipeline, high‑pressure crude, hydrotreater feed
ITT Goulds3640 BB2 seriesAPI 610 BB2, ISO 13709Flow ≤5,750 m³/h, head ≤850 m, pressure ≤5 MPa, temp ≤425°C, bearing life ≥40,000 hAtmospheric/vacuum units, tank farm, offshore platforms

5. Complete BB2 Crude Oil Pump Model Lineup (Core Models by Service)

Single‑Stage Models (Medium‑Low Head)

ModelDefinitionCapacity/HeadPowerApplication
Crude 200-315 BB2DN200, 315mm impeller, single‑stage400–700 m³/h / 120–180 m315 kWRefinery feed, conventional transfer
Crude 250-400 BB2DN250, 400mm impeller, single‑stage large flow700–1,200 m³/h / 150–220 m500 kWLarge refinery, tank farm transfer
Crude 300-450 BB2DN300, 450mm impeller, single‑stage high head1,200–2,000 m³/h / 180–250 m800 kWLong‑distance pipeline, hydrotreater feed
Crude 350-500 BB2DN350, 500mm impeller, single‑stage ultra‑large flow2,000–3,200 m³/h / 200–300 m1,250 kWMega‑refinery export, trunk pipeline
Crude 400-560 BB2DN400, 560mm impeller, single‑stage maximum flow3,200–4,100 m³/h / 220–320 m1,600 kWWorld‑scale pipeline hub, offshore terminal

Two‑Stage Models (High Head)

ModelDefinitionCapacity/HeadPowerApplication
Crude 150-250×2 BB2DN150, 250mm impeller ×2, two‑stage300–500 m³/h / 400–600 m450 kWHigh‑pressure hydrotreater, deep‑well crude
Crude 200-315×2 BB2DN200, 315mm impeller ×2, two‑stage main500–800 m³/h / 500–700 m710 kWCoker feed, long‑distance high‑head pipeline
Crude 250-400×2 BB2DN250, 400mm impeller ×2, two‑stage large flow800–1,200 m³/h / 550–700 m1,120 kWLarge refinery long‑distance, cross‑border pipeline
Crude 300-450×2 BB2DN300, 450mm impeller ×2, two‑stage ultra‑large flow1,200–1,800 m³/h / 600–800 m1,600 kWMega‑complex high‑head transfer, deep‑sea crude

Special Service Models (Extreme Conditions)

ModelDefinitionCapacity/HeadPowerApplication
Crude 200-315 HT BB2High‑temperature version (350–450°C), DN200400–700 m³/h / 120–180 m355 kWHigh‑temp crude, FCC transfer
Crude 250-400 HS BB2High‑sulfur version (1–3% S), DN250700–1,200 m³/h / 150–220 m560 kWSour crude, hydrotreater feed
Crude 150-250 EX BB2Explosion‑proof version, DN150200–400 m³/h / 80–120 m185 kWOffshore platform, hazardous area tank farm
Crude 300-450 LT BB2Low‑temperature version (-80°C), DN3001,200–2,000 m³/h / 180–250 m850 kWCold climate crude, cryogenic service

6. Selection Notes (Crude Oil‑Specific)

  • Flow/head margin: Select at 1.1–1.2 × max flow, 1.15 × max head to cover fluctuations. For high viscosity (≥200 mm²/s), power margin ≥25%.

  • Material matching: Conventional crude → WCB; sour crude → 2205 duplex (NACE); high temperature → chrome‑moly; low temperature → LCB.

  • Cavitation control: High‑temperature crude easily vaporizes – ensure NPSHa ≥ NPSHr + 3.0 m. Add inducer if needed (e.g., Sulzer BBS optional).

  • Maintenance convenience: Prefer back pull‑out design (e.g., Sulzer CD) – rotor removal without disconnecting piping, maintenance downtime reduced by 40%+.

  • Nozzle orientation: Refinery – top‑in top‑out (Sulzer BBS / Flowserve HDX); tank farm – side‑in side‑out.

7. Summary

The BB2 Series Crude Oil Pump features API 610 BB2 between‑bearing support, double‑suction impeller, double volute hydraulics, and wide‑service material options. It fully matches industry leaders Sulzer BBS/CD, Flowserve HDX, and ITT Goulds 3640, covering all crude oil transfer applications – refinery feed, oilfield export, long‑distance pipelines, and tank farm turnover. It delivers high efficiency, reliability, low maintenance, and is the preferred heavy‑duty pump for refineries, oilfields, and pipelines.

8. Contact Us

For detailed technical datasheets, model selection assistance (free selection report with crude viscosity, temperature, sulfur content, flow/head, NPSHa), 3D models (STEP/IGES), certification documents (API 610, NACE MR0175, ATEX/IECEx), and customized solutions (high‑temp, high‑sulfur, low‑temp, high‑viscosity), please contact:

Email: info@hyrig.com

Our engineering team responds within 24 hours with API 610 compliant solutions tailored to your crude oil transfer and pipeline needs.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit