DF78-70G Cover Check Valve | API 6A 3" 10,000 psi

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the DF series check valve range. The DF78-70G is an upper cover plate type check valve with a 78 mm nominal bore, engineered to prevent backflow in high-pressure manifolds. The removable top cover allows for easy in-line maintenance. It is available with either a 3" FIG1502 hammer union or an API 3 1/16" flange connection.
Conatct For Details
DetailReview(0)Additional

DF78-70G Cover Check Valve (78mm / 70 MPa)

HYRIG can supply the DF series check valve range. The DF78-70G is an upper cover plate type check valve with a 78 mm nominal bore, engineered to prevent backflow in high-pressure manifolds. The removable top cover allows for easy in-line maintenance. It is available with either a 3" FIG1502 hammer union or an API 3 1/16" flange connection.

Key Facts

  • Valve Type: Upper Cover Plate Check Valve (G Type)
  • Nominal Diameter: 78 mm
  • Working Pressure: 70 MPa (10,000 psi)
  • Connection Options: 3" FIG1502 Hammer Union or API Flange 3 1/16"
  • Direction: Standard (Female to Male)
  • Manufacturing Standards: API 6A
  • Temperature Level: -29°C to 121°C (Level P-U)
  • Model Code Meaning: DF (Check Valve) - 78 (Bore) - 70 (Pressure) - G (Cover Plate Type)

DF78 Series Specifications & Dimensions

Model NumberNominal DiameterPressure (MPa)L (mm)H or D (mm)Connection TypeType
DF78-70G (V1)78 mm706193623"FIG1502Cover
DF78-70G (V2)78 mm70661362API Flange 3 1/16"Cover

Data source: Technical data table.
Explore the full DF Check Valve Series.

Dimensions

Verify your connection type before ordering, as the overall length differs:

  • Variant 1 (FIG1502): L = 619 mm, H = 362 mm
  • Variant 2 (API Flange): L = 661 mm, H = 362 mm

The flange version is 42 mm longer than the hammer union version. Ensure you have adequate space for the cover plate (362 mm height) during maintenance.

Structure & Working Principle

The DF78-70G utilizes a G Type (Upper Cover Plate) design. It uses a spring-loaded poppet to prevent reverse flow. The top cover plate allows for in-line inspection and replacement of the seat and poppet, saving downtime compared to full valve removal.

Cross-Reference & Replacement

Replacing an older 3-inch check valve? Here is what to verify:

  1. Connection: Determine if your manifold requires a 3" FIG1502 hammer union or an API 3 1/16" flange.
  2. Length: Confirm the cut-out length (619 mm for FIG1502, 661 mm for Flange).
  3. Type: Confirm you need the cover plate (G) design.
  4. Flow Direction: This is standard direction (female to male).

Applications

This valve is specifically suited for:

  • Choke and kill manifolds where in-line maintenance is prioritized.
  • Wellhead Christmas trees.
  • Large flow lines.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if you need the flanged or hammer union version? Tell us your piping interface and pressure requirements, and our engineers will confirm the correct variant.

Frequently Asked Questions

Q: What is the difference between the two variants of DF78-70G?
A: Variant 1 uses a 3" FIG1502 hammer union (L=619 mm). Variant 2 uses an API 3 1/16" flange (L=661 mm).

Q: What is the advantage of the G type?
A: The upper cover plate allows for easier maintenance of the internal parts without removing the entire valve from the line.

Q: What is the working pressure?
A: The DF78-70G is rated for 70 MPa (10,000 psi).

Contact

For DF78-70G cover check valve selection, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit