DF103-35G Cover Check Valve | API 6A 4" 5,000 psi

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the DF series check valve range. The DF103-35G is an upper cover plate type check valve with a 103 mm (4") nominal bore, engineered to prevent backflow in low-pressure manifolds. The removable top cover allows for easy in-line maintenance. It features an API 4 1/16" flange connection.
Conatct For Details
DetailReview(0)Additional

DF103-35G Cover Check Valve (4" / 35 MPa)

HYRIG can supply the DF series check valve range. The DF103-35G is an upper cover plate type check valve with a 103 mm (4") nominal bore, engineered to prevent backflow in low-pressure manifolds. The removable top cover allows for easy in-line maintenance. It features an API 4 1/16" flange connection.

Key Facts

  • Valve Type: Upper Cover Plate Check Valve (G Type)
  • Nominal Diameter: 103 mm (4")
  • Working Pressure: 35 MPa (5,000 psi)
  • Connection Type: API Flange 4 1/16"
  • Direction: Standard (Female to Male)
  • Manufacturing Standards: API 6A
  • Temperature Level: -29°C to 121°C (Level P-U)
  • Model Code Meaning: DF (Check Valve) - 103 (Bore) - 35 (Pressure) - G (Cover Plate Type)

DF103 Series Specifications & Dimensions

Model NumberNominal DiameterPressure (MPa)L (mm)H or D (mm)Connection TypeType
DF103-35G103 mm35549403API Flange 4 1/16"Cover
DF103-70G103 mm70670408API Flange 4 1/16"Cover

Data source: Technical data table.
Need higher pressure? View the DF103-70G Cover Check Valve or explore the full DF Check Valve Series.

Dimensions

The exact footprint for the DF103-35G is:

  • Face-to-Face (Length L): 549 mm
  • Height (H): 403 mm

The G type has a taller profile to accommodate the upper cover plate (403 mm height). Verify your manifold clearance before ordering.

Structure & Working Principle

The DF103-35G utilizes a G Type (Upper Cover Plate) design. It uses a spring-loaded poppet to prevent reverse flow. The top cover plate allows for in-line inspection and replacement of the seat and poppet.

The 35 MPa (5,000 psi) pressure rating makes it suitable for standard wellhead and manifold applications, while the 4-inch bore allows for high flow rates.

Cross-Reference & Replacement

Replacing an older 4-inch check valve? Here is what to verify:

  1. Connection: Confirm your manifold uses an API 4 1/16" flange.
  2. Length: Verify your existing piping requires a 549 mm length.
  3. Pressure Rating: Verify your system is rated for 35 MPa (5,000 psi).
  4. Flow Direction: This is standard direction (female to male).

Applications

This valve is specifically suited for:

  • Low-pressure choke and kill manifolds.
  • Wellhead Christmas trees.
  • High-volume flow lines.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 35 MPa rating is sufficient for your system? Tell us your maximum working pressure, and our engineers will confirm the correct model.

Frequently Asked Questions

Q: What is the advantage of the G type?
A: The upper cover plate allows for easier maintenance of the internal parts without removing the entire valve from the line.

Q: What is the working pressure?
A: The DF103-35G is rated for 35 MPa (5,000 psi).

Q: What is the connection type?
A: It features an API Flange 4 1/16" connection.

Contact

For DF103-35G cover check valve selection, contact HYRIG: info@hyrig.com

Page last updated: 2026-11-08

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit