Diesel Oil Pump | API 610 OH2 Centrifugal Pump | China OH2 Pump Manufacturer

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 OH2 single‑stage, overhung pump for diesel oil / middle distillate service. Suitable for refinery transfer, pipeline booster, terminal loading, and fuel injection. High efficiency, easy maintenance. China OH2 pump manufacturer.

Conatct For Details
DetailReview(0)Additional

A diesel oil pump must reliably handle middle distillate fuels with moderate viscosity (2–6 cSt at 40°C), low corrosivity, and typical refinery/tank farm flow requirements. Our API 610 OH2 centrifugal pump is specifically engineered for diesel, gas oil, and other middle distillate services. This design fully complies with API 610 11th/12th edition (ISO 13709) – the global standard for refinery and process pumps.

Why API 610 OH2 for diesel duty?

The OH2 type is a horizontal, single‑stage, overhung impeller pump with foot‑mounted casing. For diesel oil service, it offers:

  • Compact, cost‑effective design – Ideal for transfer, loading, and booster duties.

  • Easy maintenance – Back pull‑out design allows rotor, bearing housing and seal removal without disturbing piping or motor.

  • Viscosity tolerance – Handles diesel up to ~100 cSt with minor efficiency reduction; optional impeller trimming or speed adjustment.

  • API 682 seal compatibility – Single mechanical seal (Plan 11/13) sufficient for clean diesel; tandem or double seals for emission control.

  • High efficiency – Optimized hydraulics for diesel’s density/viscosity, achieving >80% pump efficiency.

  • Material compatibility – Carbon steel casing (WCB/WCC) with 12% chrome (CA6NM) or 316SS impeller/shaft.

Key design features for diesel service

  • Hydraulic coverage – Broad flow range (5 – 2000 m³/h), heads up to 250 m.

  • Sealing options –

    • Single mechanical seal with Plan 11 (internal recirculation) for clean diesel.

    • Tandem seal with Plan 52 for zero emissions (environmental compliance).

    • Gland packing acceptable for low‑cost, non‑critical service.

  • Bearing housing – Oil lubricated (oil mist optional) with labyrinth seals for contamination protection.

  • Viscosity handling – No heating required for normal diesel; for heavy diesel or cold climate, optional steam / electric tracing on casing.

  • Temperature range – Ambient to 150°C (diesel typically 10°C – 80°C).

  • Pressure rating – Up to 25 bar (higher on request).

  • Speed – 1450, 2900, or 3600 rpm; VSD compatible.

Typical performance range

ParameterValue
Flow rate5 – 2000 m³/h
HeadUp to 250 m
TemperatureUp to 150°C
Pressure ratingUp to 25 bar
Viscosity range1 – 100 cSt (efficiency derated at high end)
Speeds1450 / 2900 / 3600 rpm
EfficiencyUp to 85%

Typical applications

  • Refinery diesel transfer – From hydrotreater / hydrocracker to storage tanks.

  • Pipeline diesel booster – Mainline pumping stations.

  • Terminal loading – Truck / railcar loading racks for ultra‑low sulfur diesel (ULSD).

  • Fuel oil supply – To diesel generators, boilers, or heaters.

  • Marine diesel transfer – Bunkering and shipboard transfer (higher capacity).

  • Blending – In‑line blending of additives (cetane improvers, lubricity agents).

Why choose our API 610 OH2 diesel oil pump?

  • Full API 610 compliance – Performance test, mechanical run test with vibration & temperature monitoring.

  • High efficiency – CFD optimized impeller reduces power consumption – important for continuous transfer.

  • Easy seal replacement – Cartridge mechanical seals minimize downtime.

  • Short lead time – Standard sizes ex‑stock; custom hydraulics with competitive delivery.

  • Lower total cost – Competitive price + long MTBR + global spare parts support.

  • Global support – Impellers, shafts, casings, bearings, seals shipped worldwide.

Quality assurance

  • ISO 9001:2015 certified.

  • API 610 mechanical run test (4‑hour or customer specified) with vibration & bearing temperature monitoring.

  • Hydrostatic test of casing.

  • Material traceability EN 10204 3.1 / 3.2.

  • NDE – MT, PT, UT as required.

How to specify your diesel oil pump

Please provide: flow (m³/h), head (m), operating temperature (°C), density & viscosity (cSt at pumping temperature), NPSHa (m), diesel type (ULSD, marine diesel, heavy diesel), and any emission regulation requirements (e.g., LDAR, low fugitive seals). We will recommend impeller size, seal type & plan, material class, and driver details.

Contact us

For a quotation or technical discussion on diesel oil pumps (API 610 OH2):

info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit