A kerosene pump must safely and efficiently handle a clean, moderately viscous middle distillate (1.5–4 cSt at 40°C), often requiring strict contamination control – especially for jet fuel (Jet A, Jet A‑1, JP‑8). Our API 610 OH2 centrifugal pump is specifically engineered for kerosene and aviation turbine fuel (ATF) service. This design fully complies with API 610 11th/12th edition (ISO 13709) – the global standard for refinery and process pumps.
Why API 610 OH2 for kerosene duty?
The OH2 type is a horizontal, single‑stage, overhung impeller pump with foot‑mounted casing. For kerosene service, it offers:
Compact & economical – Ideal for transfer, loading, and pipeline booster duties.
Easy maintenance – Back pull‑out design allows rotor, bearing housing and seal removal without disturbing piping or motor.
Smooth, quiet operation – Low vibration levels critical for aviation fuel quality.
API 682 seal compatibility – Single mechanical seal (Plan 11/13) sufficient for clean kerosene; tandem seals for zero emissions.
High efficiency – Optimized hydraulics for kerosene’s density/viscosity, achieving >80% pump efficiency.
Material compatibility – Carbon steel casing with stainless steel or 12% chrome trim for corrosion prevention and fuel cleanliness.
Key design features for kerosene / jet fuel service
Cleanliness focus – Smooth internal passages, no dead pockets, and materials that do not degrade fuel quality per ASTM / EI standards.
Sealing options –
Single mechanical seal with Plan 11 (recirculation) for standard kerosene.
Tandem seal with Plan 52 for zero fugitive emissions (environmental compliance).
Gland packing acceptable for non‑critical service, but not recommended for jet fuel.
Bearing housing – Oil lubricated (pure oil mist optional) with labyrinth seals.
Temperature range – Ambient to 120°C (kerosene typically 10°C – 60°C).
Pressure rating – Up to 25 bar.
Speed – 1450, 2900, or 3600 rpm; VSD compatible.
Flow range – 5 – 2000 m³/h, covering terminal loading, transfer, and pipeline duties.
Typical performance range
| Parameter | Value |
|---|---|
| Flow rate | 5 – 2000 m³/h |
| Head | Up to 250 m |
| Temperature | Up to 120°C |
| Pressure rating | Up to 25 bar |
| Viscosity range | 1 – 10 cSt (efficiency maintained) |
| Speeds | 1450 / 2900 / 3600 rpm |
| Efficiency | Up to 85% |
Typical applications
Refinery kerosene transfer – From hydrotreater / crude unit to storage tanks.
Jet fuel pipeline – Mainline booster stations (Jet A / JP‑8).
Terminal loading – Truck / railcar / marine loading racks for aviation fuel.
Fuel filtration & dispensing – Before micro‑filters and hydrant systems at airports.
Fuel oil blending – Kerosene component for diesel or heating oil.
Industrial heating – Kerosene supply to furnaces or heaters.
Why choose our API 610 OH2 kerosene pump?
Full API 610 compliance – Performance test, mechanical run test with vibration & temperature monitoring.
Fuel quality protection – No contaminating materials, smooth hydraulics, and seal designs that prevent fuel degradation.
High efficiency – CFD optimized impeller reduces energy consumption – critical for continuous pipeline service.
Low NPSH requirement – Optional inducer for low NPSHa situations (certain terminal layouts).
Short lead time – Standard sizes ex‑stock; custom hydraulics with competitive delivery.
Global support – Impellers, shafts, casings, bearings, seals shipped worldwide.
Quality assurance
ISO 9001:2015 certified.
API 610 mechanical run test (4‑hour or customer specified) with vibration & bearing temperature monitoring.
Hydrostatic test of casing.
Material traceability EN 10204 3.1 / 3.2.
NDE – MT, PT, UT as required.
How to specify your kerosene pump
Please provide: flow (m³/h), head (m), operating temperature (°C), density & viscosity (cSt at pumping temperature), NPSHa (m), fuel type (kerosene, Jet A, Jet A‑1, JP‑8), and any emission regulations. We will recommend impeller size, seal type & plan, material class, and driver details.
Contact us
For a quotation or technical discussion on kerosene pumps (API 610 OH2):
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.