DIN 3352 Gate Valve FAQ | PN, F Series & Throttling

2026-11-19 19:18

DIN 3352 Gate Valve FAQ

HYRIG can supply DIN 3352 gate valves. This FAQ addresses common engineering and procurement questions regarding throttling, pressure ratings, face-to-face series, and stem configurations.

Frequently Asked Questions

Q: Can a DIN gate valve be used for throttling?

No. Gate valves are for full-open or full-closed isolation. Partial opening causes vibration, erosion, and seat damage, and the valve may never shut tight again.

Q: What is the difference between DIN 3352 and API 600?

DIN 3352 uses PN ratings and metric dimensions; API 600 uses Class ratings and inch dimensions. The face-to-face series and test acceptance criteria also differ.

Q: Does DN and PN uniquely define the face-to-face length?

No. DIN 3202 defines multiple series (F4, F5, F7, F8). Always specify the face-to-face series explicitly.

Q: What is the difference between OS&Y and NRS?

OS&Y (rising stem) provides visual position indication and keeps the threads outside the fluid. NRS (non-rising stem) is compact and suits buried or confined installations.

Q: When should I use a flexible wedge?

Flexible wedges are generally preferred for steam, superheated service, and rapid thermal cycling, where a solid wedge may bind after hot closure and cooling.

Q: What testing standards apply to DIN gate valves?

Standard testing is to DIN 3230 and EN 12266-1. API 598 testing can be provided as an option for projects that require it.

Q: What is the typical lead time?

Standard lead time is 4–6 weeks depending on size, PN rating, material, and documentation.

Q: Are material certificates provided?

Yes. EN 10204 3.1 material certificates and DIN 3230 test reports can be provided upon request.

Selection Support

For specific questions regarding your DIN gate valve selection or installation, provide the DN, PN rating, existing gap, stem configuration, and service conditions. Our engineering team will confirm the specification.

Contact

For more information on DIN 3352 gate valves, contact HYRIG: info@hyrig.com

Related Pages

Name:
Message:
Verification code:
Submit
Comment