| Parameter | Value |
|---|---|
| Valve Type | Double valve |
| Max Working Pressure | 70 MPa |
| Standard Seal Rating | 150°C |
| Optional Seal Rating | 204°C |
| Valve Body Material | Fiber phenolic |
| Spring Material | Phosphor bronze C510 |
| Spring Fatigue Rating | 300,000 compression cycles |
| Drillability | PDC drillable |
| Casing Size Range | 5-1/2" to 13-3/8" (confirm specific size) |
| Connection Types | BTC / LTC / STC (API) |
Data source: Technical data table.
Exact OD and overall length depend on the casing size and weight selected. Provide your casing specification to match the correct connection and body dimensions.
| Casing Size | Connection | OD | ID | Length |
|---|---|---|---|---|
| 5-1/2" – 13-3/8" | BTC / LTC / STC | By casing size | By casing size | By casing size |
Specific dimensions are confirmed against the selected casing specification at order.
The 331 Series uses two independent spring-loaded valves in series. When pumping stops, both valves close; the second valve provides a redundant barrier if the primary valve is held open by debris or cement particles.
Upgrading from a single-valve float collar, or replacing a worn double-valve unit? Check the following before selecting the 331 Series:
For the full float collar and float shoe range, see the Float Collar & Float Shoe Series.
Pressure ratings apply to the valve assembly. Verify connection ratings and casing burst/collapse limits separately against your well program before installation.
Not certain whether the 331 double-valve configuration is the right fit for your well? Send your casing specification, bottomhole temperature, and connection type, and we will confirm the correct model and seal option.
Q: What is the maximum pressure rating of the 331 Series?
A: The 331 Series is rated to 70 MPa working pressure.
Q: Is the entire valve assembly PDC drillable?
A: Yes. Both the fiber phenolic valve body and the phosphor bronze springs are fully PDC drillable.
Q: What is the difference between the 331 double valve and a single valve float collar?
A: The 331 uses two valves in series. The second valve provides a redundant seal if the primary valve is held open by debris; this is useful in wells where cement backflow risk is high. A single valve is sufficient for standard cementing where cost is the priority.
Q: What temperature seal options are available?
A: Standard seal rated to 150°C; optional seal rated to 204°C.
Q: What is the typical lead time?
A: Standard lead time is typically 4–6 weeks depending on casing size and order quantity. For urgent downtime or year-end shutdown planning, contact us with your required delivery date.
For 331 Series Double Valve Float Collar selection and cementing accessory support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.