| Parameter | Value |
|---|---|
| Series | 333 Series |
| Tool Type | Float Shoe |
| Valve Type | Single Valve |
| Material | PDC Drillable materials |
| Release Mechanism | Push in - rotate out |
| Wiper Plug Compatibility | Optional latch-in drill pipe wiper plugs |
| Casing Size Range | 5-1/2" to 13-3/8" (confirm size) |
| Connection Types | BTC / LTC / STC |
Data source: Technical data table.
Like all float shoes, the exact OD, ID, and length depend on the casing size and weight. The internal receptacle is machined to match the specific stinger profile used for the job.
| Casing Size | Connection | OD | ID | Length |
|---|---|---|---|---|
| 5-1/2" – 13-3/8" | API Threads | By casing size | By size & stinger | By casing size |
Specific dimensions are confirmed against the selected casing specification at order.
The 333 Series is designed for inner-string cementing. Instead of dropping plugs from the surface, a smaller drill pipe string with a stinger is run inside the casing. The stinger stabs into the float shoe's receptacle.
Selecting the 333 Series over a standard float shoe involves specific operational requirements:
For the full range, see the Float Collar & Float Shoe Series.
Pressure and temperature ratings are application-dependent. Verify the selected float shoe's integrity against your well's maximum anticipated differential pressure before installation.
Need to confirm if the 333 Series is compatible with your inner-string BHA and stinger setup? Send us your drill pipe specs and casing program, and we will verify the connection and seal compatibility.
Q: How is the stinger released from the 333 Series float shoe?
A: The release operation requires a push-in and rotate-out action to disengage the latch mechanism before pulling the inner string out of the hole.
Q: Can I use a standard top plug with this float shoe?
A: No. Because it is a stab-in design, you must use the corresponding latch-in drill pipe wiper plugs to ensure proper wiping of the inner string.
Q: Is the entire float shoe PDC drillable?
A: Yes, the 333 Series is manufactured with 100% PDC drillable materials, including the internal receptacle.
Q: What is the lead time for this specific model?
A: Lead time is typically 4-6 weeks. For urgent deployment, please contact our team to check current inventory or expedite production.
For 333 Series Stab-in Float Shoe selection and accessory support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.