Float Collar & Float Shoe Series | Single & Double Valve Options

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the complete float collar and float shoe series and their spare parts. These casing accessories are essential for primary cementing, featuring PDC drillable materials, high-pressure r
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Product Scope: Complete range of float collars and float shoes.
  • Valve Options: Single valve, double valve, auto-fill, and stab-in designs.
  • Standard Material: Fiber phenolic valve body, PDC drillable.
  • Alternative Material: Aluminum alloy guide shoes available for easy installation.
  • Pressure Rating: Up to 70 MPa depending on model.
  • Temperature Rating: Up to 204°C with high-temp seals.

Key Specifications (Complete Model Range)

Below is a comprehensive comparison of the standard float collar and float shoe series available.

SeriesTool TypeValve TypeMaterialKey FeaturesMax Pressure
330/320Collar / ShoeSingle ValvePhenolicStandard single valve design70 MPa
331/321Collar / ShoeDouble ValvePhenolicRedundant sealing for backflow prevention70 MPa
328ShoeSingle/DoublePhenolicStandard nose design70 MPa
327ShoeSingle/DoublePhenolicHelical carbide coated blades70 MPa
329ShoeSingle/DoublePhenolicBullet nose with multiple down jets70 MPa
333/335Collar / ShoeSinglePDC MaterialStab-in, 100% PDC drillable70 MPa
324/334Collar / ShoeSinglePDC MaterialStab-in latch-in, allows casing reciprocation70 MPa
430/420Collar / ShoeSingleAluminumEasy to handle, aluminum alloy body70 MPa
433/434Collar / ShoeSingleAluminumSelf-latch or auto-fill options70 MPa

Data source: Technical data table.

Dimensions

Float equipment dimensions (OD, ID, overall length) are strictly tied to the casing size and weight.

Casing Size RangeStandard ConnectionApplicable Series
4-1/2" to 20"BTC / LTC / STC330/331, 320/321, 327/328, 420/430

Specific dimensions are confirmed against the selected casing specification at order.

Structure / Working Principle

Float equipment operates on a simple check-valve principle. Fluid pumped from the surface forces the valve open, allowing cement to flow down and out into the annulus. When pumping stops, the spring pushes the valve closed, preventing the heavier cement slurry from flowing back into the casing.

  • Single Valve: Standard configuration, suitable for most primary cementing jobs.
  • Double Valve: Two valves in series. Provides a redundant seal, highly recommended for wells with critical pressure control or where cement backflow is highly detrimental.
  • Auto-fill (Differential Fill): Allows mud to flow upward through the casing while running in, reducing surge pressure and preventing lost circulation.

Cross-Reference & Replacement

Selecting the right series depends on your operational goals:

  1. Need to reduce surge pressure while running casing? Choose the auto-fill models (e.g., 434, 423).
  2. Need to reciprocate the casing during cementing? Use the stab-in latch-in series (e.g., 324/334).
  3. Need maximum backflow protection? Select the double valve series (331 Series).
  4. Want to minimize drill-out time? Choose the 100% PDC drillable series (e.g., 333/335).

Applications

  • Standard Casing Cementing: Single valve models (330, 320).
  • Critical Pressure Wells: Double valve models (331, 321).
  • Deviated and Horizontal Wells: Auto-fill and bullet nose shoes (329) to navigate ledges.
  • Wells requiring fast drill-out: Stab-in models with aluminum or PDC materials.

Disclaimer: This equipment is designed for high-pressure and high-temperature industrial applications. Ensure strict compliance with local safety standards and verify pressure and temperature ratings prior to installation in downhole operations.

Selection Support

Explore our most popular configuration: 331 Series Double Valve Float Collar.
Not sure which series fits your casing program? Send us your casing size, weight, and bottomhole conditions, and our team will recommend the optimal float equipment.

Frequently Asked Questions

Q: What is the difference between a float collar and a float shoe?
A: A float shoe is installed at the very bottom of the casing string and has a rounded nose to guide the casing. A float collar is installed one or two joints above the shoe and provides a flat landing surface for the cement plugs.

Q: Can I use a PDC bit to drill out the 330 series?
A: Yes. The valve body and springs in the 330 and 331 series are made of PDC drillable materials (fiber phenolic and phosphor bronze).

Q: What is the typical lead time for bulk float equipment orders?
A: Standard lead time is 4-6 weeks. For large-scale projects or urgent downtime, please contact us to discuss production scheduling.

Contact

For float collar and float shoe series selection and spare parts support, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit