Primary cementing is a critical phase in well construction. The equipment selected must withstand high pressures, temperatures, and abrasive conditions while ensuring proper placement of cement slurry.
| Tool Category | Primary Function | Key Features |
|---|---|---|
| Float Collar & Shoe Series | Prevents cement backflow; guides casing | Single/double valves, PDC drillable, 70MPa |
| Cement Plugs | Separates fluids and wipes casing walls | Top/bottom plugs, non-rotating designs |
| Stage Collars | Enables multi-stage cementing | Mechanical/hydraulic, short length |
| Liner Hangers | Suspends liner strings | Mechanical/hydraulic set, high load capacity |
| Centralizers & Stop Collars | Centers casing for uniform cement sheath | Bow spring, rigid, roller, composite types |
A typical cementing string relies on a combination of these tools working in sequence. The float shoe at the bottom guides the casing and contains a check valve. The float collar, placed one or two joints above the shoe, provides a secondary check valve and a landing point for the cement plugs. As cement is pumped down, the bottom plug ruptures to allow slurry to pass, and the top plug follows to displace the cement into the annulus.
Disclaimer: This equipment is designed for high-pressure and high-temperature industrial applications. Ensure strict compliance with local safety standards and verify pressure and temperature ratings prior to installation in downhole operations.
Building a cementing string requires precise matching of thread types, pressure ratings, and temperature limits. Contact our engineering team with your well plan and casing specifications for a tailored tool selection.
Q: What is the primary purpose of a float collar?
A: A float collar is installed in the casing string to prevent cement slurry from flowing back into the casing after it has been displaced into the annulus.
Q: What materials are used for drillable cementing tools?
A: Common drillable materials include fiber phenolic for valve bodies, aluminum alloy for guide shoes, and phosphor bronze for springs, all designed to be drilled out with a PDC bit.
Q: What is the typical lead time for cementing tools?
A: Standard lead time is typically 4-6 weeks depending on the specific tools and quantities. Please contact us for urgent requirements.
For downhole cementing tools selection and spare parts support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.