Casappa PLM 30-51 Gear Motor | 51.83 cm³/rev 210 bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLM 30-51 gear motor. The Casappa PLM 30-51 is a 51.83 cm³/rev external gear motor rated at 210 bar continuous pressure and 2800 min⁻¹ maximum speed, part of the PLM 30 se
Conatct For Details
DetailReview(0)Additional

Casappa PLM 30-51 Gear Motor | 51.83 cm³/rev 210 bar

HYRIG can supply the Casappa PLM 30-51 gear motor. The Casappa PLM 30-51 is a 51.83 cm³/rev external gear motor rated at 210 bar continuous pressure and 2800 min⁻¹ maximum speed, part of the PLM 30 series for high-torque hydraulic drives.

Key Facts

ParameterValue
ModelPLM 30-51
TypeExternal gear motor
Displacement51.83 cm³/rev (3.16 in³/rev)
Max continuous pressure210 bar (3045 psi)
Max peak pressure240 bar (3480 psi)
Max speed2800 min⁻¹
Min speed500 min⁻¹
Mounting flangesE3, E4, B3, S5, U3
Port typesGerman/European flanged, SAE SSM/SSS, BSPP, SAE ODT

PLM 30-51 Specifications & Torque

ParameterValue
Displacement51.83 cm³/rev
Theoretical torque at 200 bar140.2 Nm
Theoretical torque at 210 bar147.2 Nm
Max continuous pressure210 bar
Max peak pressure240 bar
Max speed2800 min⁻¹

Data source: Technical data table

Dimensions

Mounting Flange Options

Flange CodeBolt PatternPilot Ø (mm)Shaft Height (mm)
E34 × M10, 98×98 mm50.823.5
E44 × M10, 114.3×114.3 mm6023.5
B32 × M10, 72 mm spacing6023.5
S52 × 1/2"-13 UNC, 146 mm101.623.5
U32 × 1/2"-13 UNC101.623.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
83European tapered 1:8Key 4×7.5 mm
84European tapered 1:8Key 4.75×10 mm
56German tapered 1:5Key 5×7.5 mm
41StraightKey 6×6×25 mm
A8SAE B spline13 teeth, 16/32 pitch
A5SAE BB spline15 teeth, 16/32 pitch
04SAE B spline13 teeth, 16/32 pitch
05SAE BB spline15 teeth, 16/32 pitch
32SAE B straightKey 6.35×25.4 mm
33SAE BB straightKey 6.35×32 mm

Port Options

Port CodeTypeSize
BM/BLGerman flangedM8, 4-bolt
ED/EBEuropean flangedM8/M10, 4-bolt
MB/MASAE flanged (SSM)3000 psi, 4-bolt
SB/SASAE flanged (SSS)3000 psi, 4-bolt
GF/GFGas BSPPG 1" – G 1 1/2"
OF/ODSAE ODT1 5/16"-12 UNF – 1 7/8"-12 UNF

Structure / Working Principle

The Casappa PLM 30-51 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. The 51.83 cm³/rev displacement delivers approximately 140 Nm at 200 bar, making it suitable for high-torque hydraulic drives on heavy mobile and industrial equipment.

Cross-Reference & Replacement

Looking to replace a Casappa PLM 30-51 or find an equivalent? Here's what to check:

  1. Displacement — Confirm 51.83 cm³/rev matches your torque and speed requirements.
  2. Mounting flange — Identify your existing flange code (E3, E4, B3, S5, or U3).
  3. Drive shaft — Verify shaft type and keyway dimensions.
  4. Port connections — Check thread type and port size.
  5. Rotation — Confirm S, D, or R rotation code.

Applications

The Casappa PLM 30-51 is commonly used in:

  • Heavy mobile drives — excavator track drives, wheel loader wheel drives
  • Industrial actuators — large conveyor drives, heavy mixer drives, extruder drives
  • Material handling — heavy winch drives, reach stacker propulsion
  • Municipal equipment — refuse truck compaction drives, heavy sweeper brush drives
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the PLM 30-51 is the right displacement for your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model and configuration.

Frequently Asked Questions

Q: What is the torque of the Casappa PLM 30-51 at 200 bar?
A: The PLM 30-51 delivers approximately 140 Nm at 200 bar (200 × 51.83 × 0.85 / 62.83).

Q: What is the maximum pressure of the PLM 30-51?
A: The PLM 30-51 is rated at 210 bar continuous pressure and 240 bar peak pressure.

Q: Can I replace an older Casappa motor with a PLM 30-51?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for the Casappa PLM 30-51?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the model code PLM 30-51 mean?
A: PLM = motor series, 30 = group size, 51 = nominal displacement (51.83 cm³/rev actual). See Casappa How to Order for full code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLM 30-51 unit?
A: Yes. HYRIG supplies complete PLM 30-51 motors. Send us the nameplate details for confirmation.

Contact

For Casappa PLM 30-51 gear motor selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLM 30 Gear Motors, Casappa PLM 30-34 Gear Motor, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit