Casappa PLM 30 Gear Motors | 91 cm³/rev Hydraulic Motors

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLM 30 series gear motors. The Casappa PLM 30 is an external gear motor series with displacements from 21.99 to 91.10 cm³/rev and maximum continuous pressure up to 250 bar, designed for high-torque mobile and industrial hydraulic systems.
Conatct For Details
DetailReview(0)Additional

Casappa PLM 30 Gear Motors | 91 cm³/rev Hydraulic Motors

HYRIG can supply the Casappa PLM 30 series gear motors. The Casappa PLM 30 is an external gear motor series with displacements from 21.99 to 91.10 cm³/rev and maximum continuous pressure up to 250 bar, designed for high-torque mobile and industrial hydraulic systems. The series includes 10 displacements with multiple flange, shaft, and port configurations.

Key Facts

ParameterValue
SeriesPLM 30
TypeExternal gear motor
Displacement range21.99–91.10 cm³/rev (1.34–5.56 in³/rev)
Max continuous pressure250 bar (3625 psi)
Max speedup to 3000 min⁻¹ (varies by displacement)
Mounting flangesEuropean, SAE B/BB, German
Port typesGerman/European flanged, SAE flanged (SSM/SSS), BSPP, SAE ODT
Seal optionsBuna N (standard), Viton

PLM 30 Model Specifications & Displacement Range

ModelDisplacement (cm³/rev)Displacement (in³/rev)Max Pressure (bar)Max Speed (min⁻¹)
PLM 30-2221.991.342503000
PLM 30-2726.701.632503000
PLM 30-3434.552.112403000
PLM 30-3839.272.402403000
PLM 30-4343.982.682303000
PLM 30-5151.833.162102800
PLM 30-6161.263.741902500
PLM 30-7373.824.501702300
PLM 30-8281.684.981602200
PLM 30-9091.105.561502000

Data source: Technical data table

Dimensions

Mounting Flange Options (PLM 30)

Flange TypeCodeBolt PatternShaft Height (mm)
EuropeanE34 × M10, 98×98 mm23.5
EuropeanE44 × M10, 114.3×114.3 mm23.5
GermanB32 × M10, 72 mm spacing23.5
SAE B 2-boltS52 × 1/2"-13 UNC, 146 mm spacing23.5
SAE B 2-boltU32 × 1/2"-13 UNC23.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
83European tapered 1:8Key 4×7.5 mm
84European tapered 1:8Key 4.75×10 mm
56German tapered 1:5Key 5×7.5 mm
41StraightKey 6×6×25 mm
A8SAE B spline13 teeth, 16/32 pitch
A5SAE BB spline15 teeth, 16/32 pitch
04SAE B spline13 teeth, 16/32 pitch
05SAE BB spline15 teeth, 16/32 pitch
32SAE B straightKey 6.35×25.4 mm
33SAE BB straightKey 6.35×32 mm

Port Options

Port CodeTypeStandard
BM/BLGerman flanged4-bolt, M8
ED/EBEuropean flanged4-bolt, M8/M10
MB/MASAE flanged (SSM)4-bolt, 3000 psi
SB/SASAE flanged (SSS)4-bolt, 3000 psi
GF/GFGas BSPPG 1" – G 1 1/2"
OF/ODSAE ODT1 5/16"-12 UNF – 1 7/8"-12 UNF

Structure / Working Principle

The Casappa PLM 30 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. This positive-displacement design delivers torque proportional to pressure differential and speed proportional to flow rate.

Cross-Reference & Replacement

Looking to replace an existing gear motor with a Casappa PLM 30? Here's what to check:/n/n1. Displacement — Match the cm³/rev to your required torque and speed (see table above).

  1. Mounting flange — Confirm the bolt pattern and pilot diameter match your existing bracket (E3, E4, B3, S5, or U3).
  2. Drive shaft — Verify the shaft type (tapered, straight, or splined) and keyway dimensions match your coupling.
  3. Port connections — Check thread type (BSPP, SAE ODT, or flanged) and port size against your hoses and fittings.
  4. Rotation — Left-hand (S), right-hand (D), or reversible (R) with external drain.

Applications

The Casappa PLM 30 series is commonly used in:/n/n- Heavy mobile drives — excavator track drives, wheel loader wheel drives

  • Industrial actuators — large conveyor drives, heavy mixer drives, extruder drives
  • Material handling — heavy winch drives, reach stacker propulsion
  • Municipal equipment — refuse truck compaction drives, heavy sweeper brush drives
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure which PLM 30 displacement or configuration fits your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.

Frequently Asked Questions

Q: What is the maximum pressure of the Casappa PLM 30?
A: The PLM 30 series handles up to 250 bar continuous pressure for smaller displacements (22–27 cm³/rev). Larger displacements are rated at 150–240 bar.

Q: How do I calculate motor torque?
A: Use M = Δp × V × ηm / 62.83 (Nm), where Δp is pressure drop (bar), V is displacement (cm³/rev), and ηm is mechanical efficiency (≈0.85).

Q: Can I replace an older Casappa motor with a PLM 30?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for Casappa PLM 30 motors?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand).

Q: Do you provide the How to Order guide for PLM 30?
A: Yes. See Casappa How to Order for the complete model code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLM 30 unit?
A: Yes. HYRIG supplies complete PLM 30 series motors. Send us the nameplate details and we will confirm the correct replacement configuration.

Contact

For Casappa PLM 30 gear motor selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 30 Gear Pumps, Casappa PLM 20 Gear Motors, Casappa PLM 30-34 Gear Motor, Casappa PLM 30-51 Gear Motor, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit