HYRIG can supply the Casappa PLP 30 series gear pumps. The Casappa PLP 30 is an external gear pump series with displacements from 21.99 to 91.10 cm³/rev and maximum continuous pressure up to 250 bar, designed for high-flow mobile and industrial hydraulic systems. The series includes 10 displacements with multiple flange, shaft, and port configurations.
| Parameter | Value |
|---|---|
| Series | PLP 30 |
| Type | External gear pump |
| Displacement range | 21.99–91.10 cm³/rev (1.34–5.56 in³/rev) |
| Max continuous pressure | 250 bar (3625 psi) |
| Max speed | up to 3000 min⁻¹ (varies by displacement) |
| Mounting flanges | European, SAE B/BB, German |
| Port types | German/European flanged, SAE flanged (SSM/SSS), BSPP, SAE ODT |
| Seal options | Buna N (standard), Viton |
| Model | Displacement (cm³/rev) | Displacement (in³/rev) | Max Pressure (bar) | Max Speed (min⁻¹) |
|---|---|---|---|---|
| PLP 30-22 | 21.99 | 1.34 | 250 | 3000 |
| PLP 30-27 | 26.70 | 1.63 | 250 | 3000 |
| PLP 30-34 | 34.55 | 2.11 | 240 | 3000 |
| PLP 30-38 | 39.27 | 2.40 | 240 | 3000 |
| PLP 30-43 | 43.98 | 2.68 | 230 | 3000 |
| PLP 30-51 | 51.83 | 3.16 | 210 | 2800 |
| PLP 30-61 | 61.26 | 3.74 | 190 | 2500 |
| PLP 30-73 | 73.82 | 4.50 | 170 | 2300 |
| PLP 30-82 | 81.68 | 4.98 | 160 | 2200 |
| PLP 30-90 | 91.10 | 5.56 | 150 | 2000 |
Data source: Technical data table
| Flange Type | Code | Bolt Pattern | Shaft Height (mm) |
|---|---|---|---|
| European | E3 | 4 × M10, 98×98 mm | 23.5 |
| European | E4 | 4 × M10, 114.3×114.3 mm | 23.5 |
| German | B3 | 2 × M10, 72 mm spacing | 23.5 |
| SAE B 2-bolt | S5 | 2 × 1/2"-13 UNC, 146 mm spacing | 23.5 |
| SAE B 2-bolt | U3 | 2 × 1/2"-13 UNC | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 83 | European tapered 1:8 | Key 4×7.5 mm |
| 84 | European tapered 1:8 | Key 4.75×10 mm |
| 56 | German tapered 1:5 | Key 5×7.5 mm |
| 41 | Straight | Key 6×6×25 mm |
| A8 | SAE B spline | 13 teeth, 16/32 pitch |
| A5 | SAE BB spline | 15 teeth, 16/32 pitch |
| 04 | SAE B spline | 13 teeth, 16/32 pitch |
| 05 | SAE BB spline | 15 teeth, 16/32 pitch |
| 32 | SAE B straight | Key 6.35×25.4 mm |
| 33 | SAE BB straight | Key 6.35×32 mm |
| Port Code | Type | Standard |
|---|---|---|
| BM/BL | German flanged | 4-bolt, M8 |
| ED/EB | European flanged | 4-bolt, M8/M10 |
| MB/MA | SAE flanged (SSM) | 4-bolt, 3000 psi |
| SB/SA | SAE flanged (SSS) | 4-bolt, 3000 psi |
| GF/GF | Gas BSPP | G 1" – G 1 1/2" |
| OF/OD | SAE ODT | 1 5/16"-12 UNF – 1 7/8"-12 UNF |
The Casappa PLP 30 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. This positive-displacement design delivers a constant flow rate proportional to shaft speed, making it suitable for high-flow hydraulic circuits that require reliable, pulse-free flow.
The pump body is constructed from high-strength cast iron, with a balanced pressure plate design that minimizes internal leakage and extends service life under continuous high-pressure operation.
Looking to replace an existing gear pump with a Casappa PLP 30? Here's what to check:
The Casappa PLP 30 series is commonly used in:
> Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which PLP 30 displacement or configuration fits your system? Send HYRIG your required flow rate (L/min), operating pressure (bar), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.
Q: What is the maximum pressure of the Casappa PLP 30?
A: The PLP 30 series handles up to 250 bar continuous pressure for smaller displacements (22–27 cm³/rev). Larger displacements are rated at 150–240 bar depending on model.
Q: What is the maximum speed of the PLP 30?
A: Max speed ranges from 2000 min⁻¹ (PLP 30-90) to 3000 min⁻¹ (PLP 30-22 to 30-43).
Q: Can I replace an older Casappa pump with a PLP 30?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for Casappa PLP 30 pumps?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand).
Q: Do you provide the How to Order guide for PLP 30?
A: Yes. See Casappa How to Order for the complete model code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLP 30 unit?
A: Yes. HYRIG supplies complete PLP 30 series pumps. Send us the nameplate details and we will confirm the correct replacement configuration.
For Casappa PLP 30 gear pump selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 20 Gear Pumps, Casappa PLP 30-34 Gear Pump, Casappa PLP 30-51 Gear Pump, Casappa PLP 30-90 Gear Pump, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.