Casappa PLP 20 Gear Pumps | 33 cm³/rev Hydraulic Pumps

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLP 20 series gear pumps. The Casappa PLP 20 is an external gear pump series with displacements from 4.95 to 33.03 cm³/rev and maximum continuous pressure up to 250 bar, designed for mobile and industrial hydraulic systems.
Conatct For Details
DetailReview(0)Additional

Casappa PLP 20 Gear Pumps | 33 cm³/rev Hydraulic Pumps

HYRIG can supply the Casappa PLP 20 series gear pumps. The Casappa PLP 20 is an external gear pump series with displacements from 4.95 to 33.03 cm³/rev and maximum continuous pressure up to 250 bar, designed for mobile and industrial hydraulic systems. The series includes 15 displacements with multiple flange, shaft, and port configurations.

Key Facts

ParameterValue
SeriesPLP 20
TypeExternal gear pump
Displacement range4.95–33.03 cm³/rev (0.30–2.01 in³/rev)
Max continuous pressure250 bar (3625 psi)
Max speedup to 4000 min⁻¹ (varies by displacement)
Mounting flangesEuropean, SAE A/AA, German 2/4 bolt
Port typesGerman/European flanged, SAE flanged (SSM/SSS), BSPP, SAE ODT
Seal optionsBuna N (standard), Viton

PLP 20 Model Specifications & Displacement Range

ModelDisplacement (cm³/rev)Displacement (in³/rev)Max Pressure (bar)Max Speed (min⁻¹)
PLP 20-44.950.302504000
PLP 20-6.36.610.402504000
PLP 20-7.27.290.442504000
PLP 20-88.260.502504000
PLP 20-99.170.562504000
PLP 20-10.510.900.662504000
PLP 20-11.211.230.692504000
PLP 20-1414.530.892504000
PLP 20-1616.851.032503600
PLP 20-1919.091.162503200
PLP 20-2021.141.292003000
PLP 20-24.524.841.521702800
PLP 20-2526.421.611702800
PLP 20-27.828.211.721302500
PLP 20-31.533.032.011302500

Data source: Technical data table

Dimensions

Mounting Flange Options (PLP 20)

Flange TypeCodeBolt PatternShaft Height (mm)
EuropeanE24 × M8, 40×40 mm16
German 2-boltB22 × M8, 72 mm spacing16
German 4-boltB44 × M8, 60×60 mm16
SAE A 2-boltS12 × 3/8"-16 UNC, 106.2 mm spacing16
SAE A 2-boltS22 × 3/8"-16 UNC, 106.2 mm spacing16
SAE A 2-boltS92 × 3/8"-16 UNC, 106.2 mm spacing16
SAE B 2-boltS52 × 1/2"-13 UNC, 146 mm spacing23.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
82European tapered 1:8Key 3×5 mm
54German tapered 1:5Key 3×6.5 mm
55German tapered 1:5Key 4×6.5 mm
46StraightKey 5×25 mm
03SAE "A" spline (9 teeth)16/32 pitch
01SAE spline (10 teeth)16/32 pitch
31SAE "A" straightKey 3.18×18 mm
04SAE "B" spline16/32 pitch
32SAE "B" straightKey 6.35×25.4 mm
12DIN 5482 splineB 17×14×9

Port Options

Port CodeTypeStandard
BE/BCGerman flanged4-bolt, M6/M8
EA/EBEuropean flanged4-bolt, M6/M8
MA/MBSAE flanged (SSM)4-bolt, 3000 psi
SA/SBSAE flanged (SSS)4-bolt, 3000 psi
GD/GEGas BSPPG 1/2" – G 3/4"
OC/ODSAE ODT3/4"-16 UNF – 1 1/16"-12 UNF

Structure / Working Principle

The Casappa PLP 20 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. This positive-displacement design delivers a constant flow rate proportional to shaft speed, making it suitable for demanding hydraulic circuits that require reliable, pulse-free flow.

The pump body is constructed from high-strength cast iron or aluminum (depending on configuration), with a balanced pressure plate design that minimizes internal leakage and extends service life under continuous high-pressure operation.

Cross-Reference & Replacement

Looking to replace an existing gear pump with a Casappa PLP 20? Here's what to check:

  1. Displacement — Match the cm³/rev to your system flow requirement (see table above).
  2. Mounting flange — Confirm the bolt pattern and pilot diameter match your existing bracket (E2, B2, B4, S1, S2, S9, or S5).
  3. Drive shaft — Verify the shaft type (tapered, straight, or splined) and keyway dimensions match your coupling.
  4. Port connections — Check thread type (BSPP, SAE ODT, or flanged) and port size against your hoses and fittings.
  5. Rotation — Left-hand (S), right-hand (D), or reversible (R/L/B) with external drain.

For cross-reference to other brands or older Casappa models, contact HYRIG with your existing part number and nameplate details.

Applications

The Casappa PLP 20 series is commonly used in:

  • Mobile hydraulic systems — steering circuits, lift cylinders, and implement control on agricultural and construction equipment
  • Industrial power units — clamping circuits on hydraulic presses, injection molding machine actuators
  • Material handling — forklift mast and tilt functions, pallet truck lift systems
  • Municipal equipment — snow plow blade actuation, street sweeper hydraulic drives

> Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure which PLP 20 displacement or configuration fits your system? Send HYRIG your required flow rate (L/min), operating pressure (bar), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.

Frequently Asked Questions

Q: What is the maximum pressure of the Casappa PLP 20?
A: The PLP 20 series handles up to 250 bar continuous pressure for displacements up to 16 cm³/rev. Larger displacements (20–31.5 cm³/rev) are rated at 130–200 bar depending on model.

Q: How do I choose between PLP 20 and PLM 20?
A: PLP 20 is a pump (converts mechanical power to hydraulic flow). PLM 20 is a motor (converts hydraulic flow to mechanical rotation). Check your system role before ordering.

Q: Can I replace an older Casappa pump with a PLP 20?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit. Contact HYRIG with your old part number for confirmation.

Q: What is the lead time for Casappa PLP 20 pumps?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized — contact HYRIG with your required delivery date.

Q: What does the "R" suffix mean in the model code?
A: "R" indicates reversible rotation with external drain. Other options: S (left-hand rotation), D (right-hand rotation), L (reversible side external drain), B (reversible internal drain).

Q: Do you provide the How to Order guide for PLP 20?
A: Yes. See Casappa How to Order for the complete model code breakdown (type + rotation + version + shaft + flange + ports + seals + options).

Q: Can HYRIG support repair or replacement of a complete PLP 20 unit?
A: Yes. HYRIG supplies complete PLP 20 series pumps. If your existing unit is beyond repair, send us the nameplate details and we will confirm the correct replacement configuration.

Contact

For Casappa PLP 20 gear pump selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 10 Gear Pumps, Casappa PLP 30 Gear Pumps, Casappa PLM 20 Gear Motors, Casappa PLP 20-14 Gear Pump, Casappa PLP 20-20 Gear Pump, Casappa PLP 20-31.5 Gear Pump, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit