HYRIG can supply the Casappa PLP 10 series gear pumps. The Casappa PLP 10 is an external gear pump series with displacements from 1.07 to 10.67 cm³/rev and maximum continuous pressure up to 250 bar, designed for compact mobile and industrial hydraulic systems. The series includes 11 displacements with multiple flange, shaft, and port configurations.
| Parameter | Value |
|---|---|
| Series | PLP 10 |
| Type | External gear pump |
| Displacement range | 1.07–10.67 cm³/rev (0.07–0.65 in³/rev) |
| Max continuous pressure | 250 bar (3625 psi) |
| Max speed | up to 4000 min⁻¹ |
| Mounting flanges | European, SAE AA, German 2/4 bolt |
| Port types | German/European flanged, BSPP, SAE ODT |
| Seal options | Buna N (standard), Viton |
| Model | Displacement (cm³/rev) | Displacement (in³/rev) | Max Pressure (bar) | Max Speed (min⁻¹) |
|---|---|---|---|---|
| PLP 10-1 | 1.07 | 0.07 | 250 | 4000 |
| PLP 10-1.5 | 1.60 | 0.10 | 250 | 4000 |
| PLP 10-2 | 2.13 | 0.13 | 250 | 4000 |
| PLP 10-2.5 | 2.67 | 0.16 | 250 | 4000 |
| PLP 10-3.15 | 3.34 | 0.20 | 250 | 4000 |
| PLP 10-4 | 4.27 | 0.26 | 250 | 4000 |
| PLP 10-5 | 5.34 | 0.33 | 250 | 4000 |
| PLP 10-5.8 | 6.20 | 0.38 | 250 | 4000 |
| PLP 10-6.3 | 6.67 | 0.41 | 250 | 4000 |
| PLP 10-8 | 8.51 | 0.52 | 250 | 4000 |
| PLP 10-10 | 10.67 | 0.65 | 250 | 4000 |
Data source: Technical data table
| Flange Type | Code | Bolt Pattern | Shaft Height (mm) |
|---|---|---|---|
| European | E1 | 4 × M6, 40×40 mm | 11.3 |
| European | E7 | 4 × M6, 40×40 mm | 11.3 |
| European | E8 | 4 × M6, 40×40 mm | 11.3 |
| German 2-bolt | B1 | 2 × M6, 64 mm spacing | 11.3 |
| German 4-bolt | K2 | 4 × M6, 42×42 mm | 11.3 |
| SAE AA 2-bolt | S0 | 2 × 1/4"-20 UNC, 82.5 mm spacing | 11.3 |
| SAE AA 2-4 bolt | R9 | 2/4 × 5/16"-18 UNC | 11.3 |
| SAE 2-4 bolt | R8 | 2/4 × 5/16"-18 UNC | 11.3 |
| SAE 2-bolt | W9 | 2 × 5/16"-18 UNC | 11.3 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 81 | European tapered 1:8 | Key 3×5 mm |
| 86 | European tapered 1:8 | Key 3×5 mm |
| 02 | SAE AA spline (9 teeth) | 16/32 pitch |
| 30 | SAE AA straight | Key 3.18×18 mm |
| 36 | SAE straight | Key 3.18×18 mm |
| 29 | Straight | Key 3×8 mm |
| Port Code | Type | Standard |
|---|---|---|
| BB/BA | German flanged | 4-bolt, M6 |
| GC/GC | Gas BSPP | G 1/8" – G 1/4" |
| OB/OA | SAE ODT | 7/16"-20 UNF – 9/16"-18 UNF |
The Casappa PLP 10 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. This positive-displacement design delivers a constant flow rate proportional to shaft speed, making it suitable for compact hydraulic circuits that require reliable, pulse-free flow.
Looking to replace an existing gear pump with a Casappa PLP 10? Here's what to check:
The Casappa PLP 10 series is commonly used in:
> Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which PLP 10 displacement or configuration fits your system? Send HYRIG your required flow rate (L/min), operating pressure (bar), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.
Q: What is the maximum pressure of the Casappa PLP 10?
A: The PLP 10 series handles up to 250 bar continuous pressure across all displacements.
Q: What is the maximum speed of the PLP 10?
A: The PLP 10 series is rated up to 4000 min⁻¹ for all displacements.
Q: Can I replace an older Casappa pump with a PLP 10?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for Casappa PLP 10 pumps?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand), L (reversible side external drain), B (reversible internal drain).
Q: Do you provide the How to Order guide for PLP 10?
A: Yes. See Casappa How to Order for the complete model code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLP 10 unit?
A: Yes. HYRIG supplies complete PLP 10 series pumps. Send us the nameplate details and we will confirm the correct replacement configuration.
For Casappa PLP 10 gear pump selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 20 Gear Pumps, Casappa PLP 10-6.3 Gear Pump, Casappa PLP 10-10 Gear Pump, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.