Casappa PLP 10-10 Gear Pump | 10.67 cm³/rev 250 bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLP 10-10 gear pump. The Casappa PLP 10-10 is a 10.67 cm³/rev external gear pump rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, the largest displacement in the PLP 10 series.
Conatct For Details
DetailReview(0)Additional

Casappa PLP 10-10 Gear Pump | 10.67 cm³/rev 250 bar

HYRIG can supply the Casappa PLP 10-10 gear pump. The Casappa PLP 10-10 is a 10.67 cm³/rev external gear pump rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, the largest displacement in the PLP 10 series.

Key Facts

ParameterValue
ModelPLP 10-10
TypeExternal gear pump
Displacement10.67 cm³/rev (0.65 in³/rev)
Max continuous pressure250 bar (3625 psi)
Max peak pressure280 bar (4061 psi)
Max speed4000 min⁻¹
Min speed500 min⁻¹
Mounting flangesE1, E7, E8, B1, K2, S0, R9, R8, W9
Port typesGerman flanged, BSPP, SAE ODT

PLP 10-10 Specifications & Flow Rate

ParameterValue
Displacement10.67 cm³/rev
Theoretical flow at 1000 RPM10.67 L/min
Theoretical flow at 2000 RPM21.34 L/min
Theoretical flow at 3000 RPM32.01 L/min
Theoretical flow at 4000 RPM42.68 L/min
Max continuous pressure250 bar
Max peak pressure280 bar
Max speed4000 min⁻¹

Data source: Technical data table

Dimensions

Mounting Flange Options

Flange CodeBolt PatternPilot Ø (mm)Shaft Height (mm)
E14 × M6, 40×40 mm5011.3
E74 × M6, 40×40 mm5011.3
E84 × M6, 40×40 mm5011.3
B12 × M6, 64 mm spacing3211.3
K24 × M6, 42×42 mm3211.3
S02 × 1/4"-20 UNC, 82.5 mm50.811.3
R92/4 × 5/16"-18 UNC50.811.3
R82/4 × 5/16"-18 UNC45.2411.3
W92 × 5/16"-18 UNC50.811.3

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
81European tapered 1:8Key 3×5 mm
86European tapered 1:8Key 3×5 mm
02SAE AA spline (9 teeth)16/32 pitch
30SAE AA straightKey 3.18×18 mm
36SAE straightKey 3.18×18 mm
29StraightKey 3×8 mm

Port Options

Port CodeTypeSize
BB/BAGerman flangedM6, 4-bolt
GC/GCGas BSPPG 1/8" – G 1/4"
OB/OASAE ODT7/16"-20 UNF – 9/16"-18 UNF

Structure / Working Principle

The Casappa PLP 10-10 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. The 10.67 cm³/rev displacement delivers approximately 21.3 L/min at 2000 RPM, making it the highest-flow option in the compact PLP 10 series.

Cross-Reference & Replacement

Looking to replace a Casappa PLP 10-10 or find an equivalent? Here's what to check:/n/n1. Displacement — Confirm 10.67 cm³/rev matches your flow requirement.

  1. Mounting flange — Identify your existing flange code (E1, E7, E8, B1, K2, S0, R9, R8, or W9).
  2. Drive shaft — Verify shaft type and keyway dimensions.
  3. Port connections — Check thread type and port size.
  4. Rotation — Confirm S, D, R, L, or B rotation code.

Applications

The Casappa PLP 10-10 is commonly used in:/n/n- Compact agricultural equipment — small tractor implement circuits, sprayer pump drives

  • Utility vehicles — hydraulic lift and tilt functions on small loaders
  • Industrial power units — small press clamping circuits, lubrication systems
  • Municipal equipment — salt spreader hydraulic drives, small sweeper functions
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the PLP 10-10 is the right displacement for your system? Send HYRIG your required flow rate (L/min) and operating pressure (bar). Our engineers will confirm the correct model and configuration.

Frequently Asked Questions

Q: What is the flow rate of the Casappa PLP 10-10 at 2000 RPM?
A: The PLP 10-10 delivers approximately 21.3 L/min at 2000 RPM (10.67 cm³/rev × 2000 × 0.97 / 1000).

Q: What is the maximum pressure of the PLP 10-10?
A: The PLP 10-10 is rated at 250 bar continuous pressure and 280 bar peak pressure.

Q: Can I replace an older Casappa pump with a PLP 10-10?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for the Casappa PLP 10-10?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the model code PLP 10-10 mean?
A: PLP = pump series, 10 = group size, 10 = nominal displacement (10.67 cm³/rev actual). See Casappa How to Order for full code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLP 10-10 unit?
A: Yes. HYRIG supplies complete PLP 10-10 pumps. Send us the nameplate details for confirmation.

Contact

For Casappa PLP 10-10 gear pump selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 10 Gear Pumps, Casappa PLP 10-6.3 Gear Pump, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit