HYRIG can supply the Casappa PLP 20-14 gear pump. The Casappa PLP 20-14 is a 14.53 cm³/rev external gear pump rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, part of the PLP 20 series for mobile and industrial hydraulic systems.
| Parameter | Value |
|---|---|
| Model | PLP 20-14 |
| Type | External gear pump |
| Displacement | 14.53 cm³/rev (0.89 in³/rev) |
| Max continuous pressure | 250 bar (3625 psi) |
| Max peak pressure | 290 bar (4206 psi) |
| Max speed | 4000 min⁻¹ |
| Min speed | 500 min⁻¹ |
| Mounting flanges | E2, B2, B4, S1, S2, S9, S5 |
| Port types | German/European flanged, SAE SSM/SSS, BSPP, SAE ODT |
| Parameter | Value |
|---|---|
| Displacement | 14.53 cm³/rev |
| Theoretical flow at 1000 RPM | 14.53 L/min |
| Theoretical flow at 2000 RPM | 29.06 L/min |
| Theoretical flow at 3000 RPM | 43.59 L/min |
| Theoretical flow at 4000 RPM | 58.12 L/min |
| Max continuous pressure | 250 bar |
| Max peak pressure | 290 bar |
| Max speed | 4000 min⁻¹ |
Data source: Technical data table
| Flange Code | Bolt Pattern | Pilot Ø (mm) | Shaft Height (mm) |
|---|---|---|---|
| E2 | 4 × M8, 40×40 mm | 36.5 | 16 |
| B2 | 2 × M8, 72 mm spacing | 36.5 | 16 |
| B4 | 4 × M8, 60×60 mm | 36.5 | 16 |
| S1 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S2 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S9 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S5 | 2 × 1/2"-13 UNC, 146 mm | 101.6 | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 82 | European tapered 1:8 | Key 3×5 mm |
| 54 | German tapered 1:5 | Key 3×6.5 mm |
| 55 | German tapered 1:5 | Key 4×6.5 mm |
| 46 | Straight | Key 5×25 mm |
| 03 | SAE "A" spline (9 teeth) | 16/32 pitch |
| 01 | SAE spline (10 teeth) | 16/32 pitch |
| 31 | SAE "A" straight | Key 3.18×18 mm |
| 04 | SAE "B" spline | 16/32 pitch |
| 32 | SAE "B" straight | Key 6.35×25.4 mm |
| 12 | DIN 5482 spline | B 17×14×9 |
| Port Code | Type | Size |
|---|---|---|
| BE/BC | German flanged | M6/M8, 4-bolt |
| EA/EB | European flanged | M6/M8, 4-bolt |
| MA/MB | SAE flanged (SSM) | 3000 psi, 4-bolt |
| SA/SB | SAE flanged (SSS) | 3000 psi, 4-bolt |
| GD/GE | Gas BSPP | G 1/2" – G 3/4" |
| OC/OD | SAE ODT | 3/4"-16 UNF – 1 1/16"-12 UNF |
The Casappa PLP 20-14 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. The 14.53 cm³/rev displacement delivers approximately 29 L/min at 2000 RPM, making it suitable for mid-flow hydraulic circuits on mobile and industrial equipment.
Looking to replace a Casappa PLP 20-14 or find an equivalent? Here's what to check:/n/n1. Displacement — Confirm 14.53 cm³/rev matches your flow requirement.
The Casappa PLP 20-14 is commonly used in:/n/n- Mobile hydraulic systems — mid-size tractor steering and implement circuits, telehandler lift functions
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the PLP 20-14 is the right displacement for your system? Send HYRIG your required flow rate (L/min) and operating pressure (bar). Our engineers will confirm the correct model and configuration.
Q: What is the flow rate of the Casappa PLP 20-14 at 2000 RPM?
A: The PLP 20-14 delivers approximately 29 L/min at 2000 RPM (14.53 cm³/rev × 2000 × 0.97 / 1000).
Q: What is the maximum pressure of the PLP 20-14?
A: The PLP 20-14 is rated at 250 bar continuous pressure and 290 bar peak pressure.
Q: Can I replace an older Casappa pump with a PLP 20-14?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for the Casappa PLP 20-14?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the model code PLP 20-14 mean?
A: PLP = pump series, 20 = group size, 14 = nominal displacement (14.53 cm³/rev actual). See Casappa How to Order for full code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLP 20-14 unit?
A: Yes. HYRIG supplies complete PLP 20-14 pumps. Send us the nameplate details for confirmation.
For Casappa PLP 20-14 gear pump selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 20 Gear Pumps, Casappa PLP 20-20 Gear Pump, Casappa PLP 20-31.5 Gear Pump, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.