Casappa How to Order | PLP & PLM Model Code Guide

2026-11-06 12:15

Casappa How to Order | PLP & PLM Model Code Guide

HYRIG can supply Casappa PLP and PLM series gear pumps and motors. This guide explains the Casappa model code structure for ordering: type, rotation, version, drive shaft, mounting flange, ports, seals, and options.

Key Facts

ParameterValue
Applicable seriesPLP 10, PLP 20, PLP 30, PLM 10, PLM 20, PLM 30
Code fields13 positions (PLP) / 10-11 positions (PLM)
Rotation codesS, D, R, L, B
Shaft codes81, 82, 83, 84, 86, 54, 55, 56, 46, 41, 03, 01, 02, 04, 05, 31, 32, 33, 12, A8, A5, 29, 30, 36, 95, B1, 48
Flange codesE1–E8, B1–B6, K2, S0–S9, R8, R9, W8, W9, U3
Port codesBB/BA, BE/BC, EA/EB, MA/MB, SA/SB, GC/GD/GE/GF/GG/GH, OA/OB/OC/OD/OF/OG/OH
Seal codesN (Buna N), V (Viton)
Shaft seal codesD (standard), H (high pressure), C (high pressure + wiper)

Model Code Structure (PLP 10 Example)

PLP10 - 6.3 - L 0 81 E1 - L - BB/BA - N EL C L - GA - FS
 1      2   3 4  5   6   7    8    9  10 11 12  13
PositionFieldOptions
1TypePLP 10-1, PLP 10-1.5, PLP 10-2, PLP 10-2.5, PLP 10-3.15, PLP 10-4, PLP 10-5, PLP 10-5.8, PLP 10-6.3, PLP 10-8, PLP 10-10
2RotationS (left), D (right), R (reversible rear external drain), L (reversible side external drain), B (reversible internal drain)
3Version0 (without outboard bearing)
4Drive shaft81, 86, 02, 30, 36, 29
5Mounting flangeE1, E7, E8, B1, K2, S0, R9, R8, W9
6Ports positionL (side), P (rear)
7Ports IN/OUTBB/BA, GC/GC, OB/OA
8SealsN (Buna N), V (Viton)
9Cover options(blank) = cast iron, E = aluminum flange + cast iron rear, L = cast iron flange + aluminum rear, EL = aluminum flange + rear
10Shaft sealD (standard wiper), H (high pressure), C (high pressure + wiper)
11Drain port position(blank) = side, L = side drain with side port, * = side drain with bottom port
12Drain portGA (PLP 10-1 to 10-3.15), others
13Shaft arrangementFS (female spline)

Model Code Structure (PLP 20 Example)

PLP20 - 14 - L 0 82 E2 - L - EA/EA - N EL C L - TA - FS
 1      2   3 4  5   6   7    8    9  10 11 12  13
PositionFieldOptions
1TypePLP 20-4 to PLP 20-31.5 (15 displacements)
2RotationS, D, R, L, B
3Version0 (without outboard bearing), W8, 4, 5, 6, 7, 8, 9 (with outboard bearing)
4Drive shaft82, 54, 55, 46, 03, 01, 31, 04, 32, 12, 48, B1, 95
5Mounting flangeE2, B2, B4, B5, B6, S1, S2, S9, S5, W8
6Ports positionL (side), P (rear)
7Ports IN/OUTBE/BC, EA/EA, MA/MA, SA/SA, GD/GD, OC/OC
8SealsN, V
9Cover options(blank), E, L, EL
10Shaft sealD, H, C
11Drain port position(blank), L, *
12Drain portTA, GB, 03
13Shaft arrangementFS (female spline)

Model Code Structure (PLM 30 Example)

PLM30 - 34 - L 0 83 E3 - L - ED/EB - N C - FS
 1      2   3 4  5   6   7    8    9  10  11
PositionFieldOptions
1TypePLM 30-22 to PLM 30-90 (10 displacements)
2RotationS, D, R
3Version0 (without outboard bearing)
4Drive shaft83, 84, 56, 41, A8, A5, 04, 05, 32, 33
5Mounting flangeE3, E4, B3, S5, U3
6Ports positionL (side)
7Ports IN/OUTBM/BL, ED/EB, MB/MA, SB/SA, GF/GF, OF/OD
8SealsN, V
9Shaft sealD, H, C
10Shaft arrangementFS (female spline)

Data source: Technical data table

Rotation Codes

CodeDescription
SLeft-hand rotation (anti-clockwise looking at drive shaft)
DRight-hand rotation (clockwise looking at drive shaft)
RReversible with rear external drain
LReversible with side external drain
BReversible with internal drain

Shaft Seal Options

CodeDescriptionMax Pressure
DStandard seal with wiper3 bar (44 psi)
HHigh pressure seal25 bar (363 psi)
CHigh pressure seal with wiper25 bar (363 psi)

Selection Support

Not sure how to build your Casappa model code? Send HYRIG your required displacement, rotation, mounting flange, shaft type, port connections, and seal preference. Our engineers will confirm the complete model code.

Frequently Asked Questions

Q: What does the first number after PLP mean?
A: The first number indicates the group size: PLP 10 (compact), PLP 20 (medium), PLP 30 (large). Group size determines displacement range and mounting dimensions.

Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand), L (reversible side external drain), B (reversible internal drain).

Q: How do I specify the mounting flange?
A: Use the flange code: E1–E8 (European), B1–B6 (German), K2 (German 4-bolt), S0–S9 (SAE), R8/R9 (SAE 2-4 bolt), W8/W9 (SAE/German), U3 (SAE B 2-bolt).

Q: What seal options are available?
A: N (Buna N standard) and V (Viton for high temperature). Shaft seal options: D (standard wiper), H (high pressure), C (high pressure + wiper).

Q: What is the lead time for a custom-configured Casappa pump?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: Can HYRIG help me confirm the correct model code?
A: Yes. Send us your nameplate details or system requirements, and our engineers will confirm the complete model code and configuration.

Contact

For Casappa model code assistance, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 10 Gear Pumps, Casappa PLP 20 Gear Pumps, Casappa PLP 30 Gear Pumps, Casappa PLM 10 Gear Motors, Casappa PLM 20 Gear Motors, Casappa PLM 30 Gear Motors.

Name:
Message:
Verification code:
Submit
Comment