HYRIG can supply the Casappa PLM 20 series gear motors. The Casappa PLM 20 is an external gear motor series with displacements from 4.95 to 33.03 cm³/rev and maximum continuous pressure up to 250 bar, designed for mobile and industrial hydraulic systems. The series includes 15 displacements with multiple flange, shaft, and port configurations.
| Parameter | Value |
|---|---|
| Series | PLM 20 |
| Type | External gear motor |
| Displacement range | 4.95–33.03 cm³/rev (0.30–2.01 in³/rev) |
| Max continuous pressure | 250 bar (3625 psi) |
| Max speed | up to 4000 min⁻¹ (varies by displacement) |
| Mounting flanges | European, SAE A/AA, German 2/4 bolt |
| Port types | German/European flanged, SAE flanged (SSM/SSS), BSPP, SAE ODT |
| Seal options | Buna N (standard), Viton |
| Model | Displacement (cm³/rev) | Displacement (in³/rev) | Max Pressure (bar) | Max Speed (min⁻¹) |
|---|---|---|---|---|
| PLM 20-4 | 4.95 | 0.30 | 250 | 4000 |
| PLM 20-6.3 | 6.61 | 0.40 | 250 | 4000 |
| PLM 20-7.2 | 7.29 | 0.44 | 250 | 4000 |
| PLM 20-8 | 8.26 | 0.50 | 250 | 4000 |
| PLM 20-9 | 9.17 | 0.56 | 250 | 4000 |
| PLM 20-10.5 | 10.90 | 0.66 | 250 | 4000 |
| PLM 20-11.2 | 11.23 | 0.69 | 250 | 4000 |
| PLM 20-14 | 14.53 | 0.89 | 250 | 4000 |
| PLM 20-16 | 16.85 | 1.03 | 250 | 3600 |
| PLM 20-19 | 19.09 | 1.16 | 250 | 3200 |
| PLM 20-20 | 21.14 | 1.29 | 200 | 3000 |
| PLM 20-24.5 | 24.84 | 1.52 | 170 | 2800 |
| PLM 20-25 | 26.42 | 1.61 | 170 | 2800 |
| PLM 20-27.8 | 28.21 | 1.72 | 130 | 2500 |
| PLM 20-31.5 | 33.03 | 2.01 | 130 | 2500 |
Data source: Technical data table
| Flange Type | Code | Bolt Pattern | Shaft Height (mm) |
|---|---|---|---|
| European | E2 | 4 × M8, 40×40 mm | 16 |
| German 2-bolt | B2 | 2 × M8, 72 mm spacing | 16 |
| German 4-bolt | B4 | 4 × M8, 60×60 mm | 16 |
| SAE A 2-bolt | S1 | 2 × 3/8"-16 UNC, 106.2 mm spacing | 16 |
| SAE A 2-bolt | S2 | 2 × 3/8"-16 UNC, 106.2 mm spacing | 16 |
| SAE A 2-bolt | S9 | 2 × 3/8"-16 UNC, 106.2 mm spacing | 16 |
| SAE B 2-bolt | S5 | 2 × 1/2"-13 UNC, 146 mm spacing | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 82 | European tapered 1:8 | Key 3×5 mm |
| 54 | German tapered 1:5 | Key 3×6.5 mm |
| 55 | German tapered 1:5 | Key 4×6.5 mm |
| 46 | Straight | Key 5×25 mm |
| 03 | SAE "A" spline (9 teeth) | 16/32 pitch |
| 01 | SAE spline (10 teeth) | 16/32 pitch |
| 31 | SAE "A" straight | Key 3.18×18 mm |
| 04 | SAE "B" spline | 16/32 pitch |
| 32 | SAE "B" straight | Key 6.35×25.4 mm |
| 12 | DIN 5482 spline | B 17×14×9 |
| Port Code | Type | Standard |
|---|---|---|
| BE/BC | German flanged | 4-bolt, M6/M8 |
| EA/EB | European flanged | 4-bolt, M6/M8 |
| MA/MB | SAE flanged (SSM) | 4-bolt, 3000 psi |
| SA/SB | SAE flanged (SSS) | 4-bolt, 3000 psi |
| GD/GE | Gas BSPP | G 1/2" – G 3/4" |
| OC/OD | SAE ODT | 3/4"-16 UNF – 1 1/16"-12 UNF |
The Casappa PLM 20 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. This positive-displacement design delivers torque proportional to pressure differential and speed proportional to flow rate.
Looking to replace an existing gear motor with a Casappa PLM 20? Here's what to check:/n/n1. Displacement — Match the cm³/rev to your required torque and speed (see table above).
The Casappa PLM 20 series is commonly used in:/n/n- Mobile hydraulic drives — agricultural equipment wheel drives, construction equipment track drives
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which PLM 20 displacement or configuration fits your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.
Q: What is the maximum pressure of the Casappa PLM 20?
A: The PLM 20 series handles up to 250 bar continuous pressure for displacements up to 16 cm³/rev. Larger displacements are rated at 130–200 bar.
Q: How do I calculate motor torque?
A: Use M = Δp × V × ηm / 62.83 (Nm), where Δp is pressure drop (bar), V is displacement (cm³/rev), and ηm is mechanical efficiency (≈0.85).
Q: Can I replace an older Casappa motor with a PLM 20?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for Casappa PLM 20 motors?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand), L (reversible side external drain), B (reversible internal drain).
Q: Do you provide the How to Order guide for PLM 20?
A: Yes. See Casappa How to Order for the complete model code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLM 20 unit?
A: Yes. HYRIG supplies complete PLM 20 series motors. Send us the nameplate details and we will confirm the correct replacement configuration.
For Casappa PLM 20 gear motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 20 Gear Pumps, Casappa PLM 10 Gear Motors, Casappa PLM 30 Gear Motors, Casappa PLM 20-14 Gear Motor, Casappa PLM 20-25 Gear Motor, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.