Casappa PLM 20-14 Gear Motor | 14.53 cm³/rev 250 bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLM 20-14 gear motor. The Casappa PLM 20-14 is a 14.53 cm³/rev external gear motor rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, part of the PLM 20 series for mobile and industrial hydraulic drives.
Conatct For Details
DetailReview(0)Additional

Casappa PLM 20-14 Gear Motor | 14.53 cm³/rev 250 bar

HYRIG can supply the Casappa PLM 20-14 gear motor. The Casappa PLM 20-14 is a 14.53 cm³/rev external gear motor rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, part of the PLM 20 series for mobile and industrial hydraulic drives.

Key Facts

ParameterValue
ModelPLM 20-14
TypeExternal gear motor
Displacement14.53 cm³/rev (0.89 in³/rev)
Max continuous pressure250 bar (3625 psi)
Max peak pressure290 bar (4206 psi)
Max speed4000 min⁻¹
Min speed500 min⁻¹
Mounting flangesE2, B2, B4, S1, S2, S9, S5
Port typesGerman/European flanged, SAE SSM/SSS, BSPP, SAE ODT

PLM 20-14 Specifications & Torque

ParameterValue
Displacement14.53 cm³/rev
Theoretical torque at 200 bar46.4 Nm
Theoretical torque at 250 bar58.0 Nm
Max continuous pressure250 bar
Max peak pressure290 bar
Max speed4000 min⁻¹

Data source: Technical data table

Dimensions

Mounting Flange Options

Flange CodeBolt PatternPilot Ø (mm)Shaft Height (mm)
E24 × M8, 40×40 mm36.516
B22 × M8, 72 mm spacing36.516
B44 × M8, 60×60 mm36.516
S12 × 3/8"-16 UNC, 106.2 mm82.5516
S22 × 3/8"-16 UNC, 106.2 mm82.5516
S92 × 3/8"-16 UNC, 106.2 mm82.5516
S52 × 1/2"-13 UNC, 146 mm101.623.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
82European tapered 1:8Key 3×5 mm
54German tapered 1:5Key 3×6.5 mm
55German tapered 1:5Key 4×6.5 mm
46StraightKey 5×25 mm
03SAE "A" spline (9 teeth)16/32 pitch
01SAE spline (10 teeth)16/32 pitch
31SAE "A" straightKey 3.18×18 mm
04SAE "B" spline16/32 pitch
32SAE "B" straightKey 6.35×25.4 mm
12DIN 5482 splineB 17×14×9

Port Options

Port CodeTypeSize
BE/BCGerman flangedM6/M8, 4-bolt
EA/EBEuropean flangedM6/M8, 4-bolt
MA/MBSAE flanged (SSM)3000 psi, 4-bolt
SA/SBSAE flanged (SSS)3000 psi, 4-bolt
GD/GEGas BSPPG 1/2" – G 3/4"
OC/ODSAE ODT3/4"-16 UNF – 1 1/16"-12 UNF

Structure / Working Principle

The Casappa PLM 20-14 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. The 14.53 cm³/rev displacement delivers approximately 46 Nm at 200 bar, making it suitable for mid-torque hydraulic drives.

Cross-Reference & Replacement

Looking to replace a Casappa PLM 20-14 or find an equivalent? Here's what to check:

  1. Displacement — Confirm 14.53 cm³/rev matches your torque and speed requirements.
  2. Mounting flange — Identify your existing flange code (E2, B2, B4, S1, S2, S9, or S5).
  3. Drive shaft — Verify shaft type and keyway dimensions.
  4. Port connections — Check thread type and port size.
  5. Rotation — Confirm S, D, R, L, or B rotation code.

Applications

The Casappa PLM 20-14 is commonly used in:

  • Mobile hydraulic drives — agricultural equipment wheel drives, construction equipment track drives
  • Industrial actuators — conveyor drives, rotary indexing tables, mixer drives
  • Material handling — winch drives, lift truck propulsion
  • Municipal equipment — sweeper brush drives, snow blower auger drives
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the PLM 20-14 is the right displacement for your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model and configuration.

Frequently Asked Questions

Q: What is the torque of the Casappa PLM 20-14 at 200 bar?
A: The PLM 20-14 delivers approximately 46 Nm at 200 bar (200 × 14.53 × 0.85 / 62.83).

Q: What is the maximum pressure of the PLM 20-14?
A: The PLM 20-14 is rated at 250 bar continuous pressure and 290 bar peak pressure.

Q: Can I replace an older Casappa motor with a PLM 20-14?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for the Casappa PLM 20-14?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the model code PLM 20-14 mean?
A: PLM = motor series, 20 = group size, 14 = nominal displacement (14.53 cm³/rev actual). See Casappa How to Order for full code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLM 20-14 unit?
A: Yes. HYRIG supplies complete PLM 20-14 motors. Send us the nameplate details for confirmation.

Contact

For Casappa PLM 20-14 gear motor selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLM 20 Gear Motors, Casappa PLM 20-25 Gear Motor, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit