HYRIG can supply the Casappa PLM 10-5 gear motor. The Casappa PLM 10-5 is a 5.34 cm³/rev external gear motor rated at 250 bar continuous pressure and 4000 min⁻¹ maximum speed, part of the PLM 10 series for compact hydraulic drives.
| Parameter | Value |
|---|---|
| Model | PLM 10-5 |
| Type | External gear motor |
| Displacement | 5.34 cm³/rev (0.33 in³/rev) |
| Max continuous pressure | 250 bar (3625 psi) |
| Max peak pressure | 280 bar (4061 psi) |
| Max speed | 4000 min⁻¹ |
| Min speed | 500 min⁻¹ |
| Mounting flanges | E1, E7, E8, B1, K2, S0, R9, R8, W9 |
| Port types | German flanged, BSPP, SAE ODT |
| Parameter | Value |
|---|---|
| Displacement | 5.34 cm³/rev |
| Theoretical torque at 200 bar | 17.0 Nm |
| Theoretical torque at 250 bar | 21.3 Nm |
| Max continuous pressure | 250 bar |
| Max peak pressure | 280 bar |
| Max speed | 4000 min⁻¹ |
Data source: Technical data table
| Flange Code | Bolt Pattern | Pilot Ø (mm) | Shaft Height (mm) |
|---|---|---|---|
| E1 | 4 × M6, 40×40 mm | 50 | 11.3 |
| E7 | 4 × M6, 40×40 mm | 50 | 11.3 |
| E8 | 4 × M6, 40×40 mm | 50 | 11.3 |
| B1 | 2 × M6, 64 mm spacing | 32 | 11.3 |
| K2 | 4 × M6, 42×42 mm | 32 | 11.3 |
| S0 | 2 × 1/4"-20 UNC, 82.5 mm | 50.8 | 11.3 |
| R9 | 2/4 × 5/16"-18 UNC | 50.8 | 11.3 |
| R8 | 2/4 × 5/16"-18 UNC | 45.24 | 11.3 |
| W9 | 2 × 5/16"-18 UNC | 50.8 | 11.3 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 81 | European tapered 1:8 | Key 3×5 mm |
| 86 | European tapered 1:8 | Key 3×5 mm |
| 02 | SAE AA spline (9 teeth) | 16/32 pitch |
| 30 | SAE AA straight | Key 3.18×18 mm |
| 36 | SAE straight | Key 3.18×18 mm |
| 29 | Straight | Key 3×8 mm |
| Port Code | Type | Size |
|---|---|---|
| BB/BA | German flanged | M6, 4-bolt |
| GC/GC | Gas BSPP | G 1/8" – G 1/4" |
| OB/OA | SAE ODT | 7/16"-20 UNF – 9/16"-18 UNF |
The Casappa PLM 10-5 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. The 5.34 cm³/rev displacement delivers approximately 21 Nm at 250 bar, making it suitable for compact hydraulic drives.
Looking to replace a Casappa PLM 10-5 or find an equivalent? Here's what to check:
The Casappa PLM 10-5 is commonly used in:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the PLM 10-5 is the right displacement for your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model and configuration.
Q: What is the torque of the Casappa PLM 10-5 at 200 bar?
A: The PLM 10-5 delivers approximately 17 Nm at 200 bar (200 × 5.34 × 0.85 / 62.83).
Q: What is the maximum pressure of the PLM 10-5?
A: The PLM 10-5 is rated at 250 bar continuous pressure and 280 bar peak pressure.
Q: Can I replace an older Casappa motor with a PLM 10-5?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for the Casappa PLM 10-5?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the model code PLM 10-5 mean?
A: PLM = motor series, 10 = group size, 5 = nominal displacement (5.34 cm³/rev actual). See Casappa How to Order for full code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLM 10-5 unit?
A: Yes. HYRIG supplies complete PLM 10-5 motors. Send us the nameplate details for confirmation.
For Casappa PLM 10-5 gear motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLM 10 Gear Motors, Casappa PLM 20 Gear Motors, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.