HYRIG can supply the Casappa PLP 30-90 gear pump. The Casappa PLP 30-90 is a 91.10 cm³/rev external gear pump rated at 150 bar continuous pressure and 2000 min⁻¹ maximum speed, the largest displacement in the PLP 30 series.
| Parameter | Value |
|---|---|
| Model | PLP 30-90 |
| Type | External gear pump |
| Displacement | 91.10 cm³/rev (5.56 in³/rev) |
| Max continuous pressure | 150 bar (2175 psi) |
| Max peak pressure | 170 bar (2465 psi) |
| Max speed | 2000 min⁻¹ |
| Min speed | 500 min⁻¹ |
| Mounting flanges | E3, E4, B3, S5, U3 |
| Port types | German/European flanged, SAE SSM/SSS, BSPP, SAE ODT |
| Parameter | Value |
|---|---|
| Displacement | 91.10 cm³/rev |
| Theoretical flow at 1000 RPM | 91.10 L/min |
| Theoretical flow at 1500 RPM | 136.65 L/min |
| Theoretical flow at 2000 RPM | 182.20 L/min |
| Max continuous pressure | 150 bar |
| Max peak pressure | 170 bar |
| Max speed | 2000 min⁻¹ |
Data source: Technical data table
| Flange Code | Bolt Pattern | Pilot Ø (mm) | Shaft Height (mm) |
|---|---|---|---|
| E3 | 4 × M10, 98×98 mm | 50.8 | 23.5 |
| E4 | 4 × M10, 114.3×114.3 mm | 60 | 23.5 |
| B3 | 2 × M10, 72 mm spacing | 60 | 23.5 |
| S5 | 2 × 1/2"-13 UNC, 146 mm | 101.6 | 23.5 |
| U3 | 2 × 1/2"-13 UNC | 101.6 | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 83 | European tapered 1:8 | Key 4×7.5 mm |
| 84 | European tapered 1:8 | Key 4.75×10 mm |
| 56 | German tapered 1:5 | Key 5×7.5 mm |
| 41 | Straight | Key 6×6×25 mm |
| A8 | SAE B spline | 13 teeth, 16/32 pitch |
| A5 | SAE BB spline | 15 teeth, 16/32 pitch |
| 04 | SAE B spline | 13 teeth, 16/32 pitch |
| 05 | SAE BB spline | 15 teeth, 16/32 pitch |
| 32 | SAE B straight | Key 6.35×25.4 mm |
| 33 | SAE BB straight | Key 6.35×32 mm |
| Port Code | Type | Size |
|---|---|---|
| BM/BL | German flanged | M8, 4-bolt |
| ED/EB | European flanged | M8/M10, 4-bolt |
| MB/MA | SAE flanged (SSM) | 3000 psi, 4-bolt |
| SB/SA | SAE flanged (SSS) | 3000 psi, 4-bolt |
| GF/GF | Gas BSPP | G 1" – G 1 1/2" |
| OF/OD | SAE ODT | 1 5/16"-12 UNF – 1 7/8"-12 UNF |
The Casappa PLP 30-90 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. The 91.10 cm³/rev displacement delivers approximately 182 L/min at 2000 RPM, making it the highest-flow option in the PLP 30 series for heavy-duty hydraulic circuits.
Looking to replace a Casappa PLP 30-90 or find an equivalent? Here's what to check:
The Casappa PLP 30-90 is commonly used in:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the PLP 30-90 is the right displacement for your system? Send HYRIG your required flow rate (L/min) and operating pressure (bar). Our engineers will confirm the correct model and configuration.
Q: What is the flow rate of the Casappa PLP 30-90 at 2000 RPM?
A: The PLP 30-90 delivers approximately 182 L/min at 2000 RPM (91.10 cm³/rev × 2000 × 0.97 / 1000).
Q: What is the maximum pressure of the PLP 30-90?
A: The PLP 30-90 is rated at 150 bar continuous pressure and 170 bar peak pressure.
Q: Why is the PLP 30-90 pressure lower than smaller displacements?
A: Larger displacement gear pumps have lower pressure ratings due to increased bearing loads and internal leakage. The 91 cm³/rev displacement limits continuous pressure to 150 bar.
Q: Can I replace an older Casappa pump with a PLP 30-90?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for the Casappa PLP 30-90?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the model code PLP 30-90 mean?
A: PLP = pump series, 30 = group size, 90 = nominal displacement (91.10 cm³/rev actual). See Casappa How to Order for full code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLP 30-90 unit?
A: Yes. HYRIG supplies complete PLP 30-90 pumps. Send us the nameplate details for confirmation.
For Casappa PLP 30-90 gear pump selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 30 Gear Pumps, Casappa PLP 30-34 Gear Pump, Casappa PLP 30-51 Gear Pump, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.