Casappa PLP 30-34 Gear Pump | 34.55 cm³/rev 240 bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLP 30-34 gear pump. The Casappa PLP 30-34 is a 34.55 cm³/rev external gear pump rated at 240 bar continuous pressure and 3000 min⁻¹ maximum speed, part of the PLP 30 series for high-flow hydraulic systems.
Conatct For Details
DetailReview(0)Additional

Casappa PLP 30-34 Gear Pump | 34.55 cm³/rev 240 bar

HYRIG can supply the Casappa PLP 30-34 gear pump. The Casappa PLP 30-34 is a 34.55 cm³/rev external gear pump rated at 240 bar continuous pressure and 3000 min⁻¹ maximum speed, part of the PLP 30 series for high-flow hydraulic systems.

Key Facts

ParameterValue
ModelPLP 30-34
TypeExternal gear pump
Displacement34.55 cm³/rev (2.11 in³/rev)
Max continuous pressure240 bar (3480 psi)
Max peak pressure270 bar (3916 psi)
Max speed3000 min⁻¹
Min speed500 min⁻¹
Mounting flangesE3, E4, B3, S5, U3
Port typesGerman/European flanged, SAE SSM/SSS, BSPP, SAE ODT

PLP 30-34 Specifications & Flow Rate

ParameterValue
Displacement34.55 cm³/rev
Theoretical flow at 1000 RPM34.55 L/min
Theoretical flow at 2000 RPM69.10 L/min
Theoretical flow at 3000 RPM103.65 L/min
Max continuous pressure240 bar
Max peak pressure270 bar
Max speed3000 min⁻¹

Data source: Technical data table

Dimensions

Mounting Flange Options

Flange CodeBolt PatternPilot Ø (mm)Shaft Height (mm)
E34 × M10, 98×98 mm50.823.5
E44 × M10, 114.3×114.3 mm6023.5
B32 × M10, 72 mm spacing6023.5
S52 × 1/2"-13 UNC, 146 mm101.623.5
U32 × 1/2"-13 UNC101.623.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
83European tapered 1:8Key 4×7.5 mm
84European tapered 1:8Key 4.75×10 mm
56German tapered 1:5Key 5×7.5 mm
41StraightKey 6×6×25 mm
A8SAE B spline13 teeth, 16/32 pitch
A5SAE BB spline15 teeth, 16/32 pitch
04SAE B spline13 teeth, 16/32 pitch
05SAE BB spline15 teeth, 16/32 pitch
32SAE B straightKey 6.35×25.4 mm
33SAE BB straightKey 6.35×32 mm

Port Options

Port CodeTypeSize
BM/BLGerman flangedM8, 4-bolt
ED/EBEuropean flangedM8/M10, 4-bolt
MB/MASAE flanged (SSM)3000 psi, 4-bolt
SB/SASAE flanged (SSS)3000 psi, 4-bolt
GF/GFGas BSPPG 1" – G 1 1/2"
OF/ODSAE ODT1 5/16"-12 UNF – 1 7/8"-12 UNF

Structure / Working Principle

The Casappa PLP 30-34 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. The 34.55 cm³/rev displacement delivers approximately 69 L/min at 2000 RPM, making it suitable for high-flow hydraulic circuits on heavy mobile and industrial equipment.

Cross-Reference & Replacement

Looking to replace a Casappa PLP 30-34 or find an equivalent? Here's what to check:

  1. Displacement — Confirm 34.55 cm³/rev matches your flow requirement.
  2. Mounting flange — Identify your existing flange code (E3, E4, B3, S5, or U3).
  3. Drive shaft — Verify shaft type and keyway dimensions.
  4. Port connections — Check thread type and port size.
  5. Rotation — Confirm S, D, or R rotation code.

Applications

The Casappa PLP 30-34 is commonly used in:

  • Heavy mobile hydraulics — excavator boom and bucket circuits, wheel loader lift and tilt functions
  • Industrial power units — large hydraulic press main circuits, injection molding machine clamp actuators
  • Material handling — heavy forklift mast and tilt functions, reach stacker hydraulic drives
  • Municipal equipment — snow plow blade actuation, refuse truck compaction systems
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the PLP 30-34 is the right displacement for your system? Send HYRIG your required flow rate (L/min) and operating pressure (bar). Our engineers will confirm the correct model and configuration.

Frequently Asked Questions

Q: What is the flow rate of the Casappa PLP 30-34 at 2000 RPM?
A: The PLP 30-34 delivers approximately 69 L/min at 2000 RPM (34.55 cm³/rev × 2000 × 0.97 / 1000).

Q: What is the maximum pressure of the PLP 30-34?
A: The PLP 30-34 is rated at 240 bar continuous pressure and 270 bar peak pressure.

Q: Can I replace an older Casappa pump with a PLP 30-34?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for the Casappa PLP 30-34?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the model code PLP 30-34 mean?
A: PLP = pump series, 30 = group size, 34 = nominal displacement (34.55 cm³/rev actual). See Casappa How to Order for full code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLP 30-34 unit?
A: Yes. HYRIG supplies complete PLP 30-34 pumps. Send us the nameplate details for confirmation.

Contact

For Casappa PLP 30-34 gear pump selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 30 Gear Pumps, Casappa PLP 30-51 Gear Pump, Casappa PLP 30-90 Gear Pump, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit