HYRIG can supply the Casappa PLM 10 series gear motors. The Casappa PLM 10 is an external gear motor series with displacements from 1.07 to 10.67 cm³/rev and maximum continuous pressure up to 260 bar, designed for compact mobile and industrial hydraulic systems. The series includes 11 displacements with multiple flange, shaft, and port configurations.
| Parameter | Value |
|---|---|
| Series | PLM 10 |
| Type | External gear motor |
| Displacement range | 1.07–10.67 cm³/rev (0.07–0.65 in³/rev) |
| Max continuous pressure | 260 bar (3770 psi) |
| Max speed | up to 4000 min⁻¹ |
| Mounting flanges | European, SAE AA, German 2/4 bolt |
| Port types | German/European flanged, BSPP, SAE ODT |
| Seal options | Buna N (standard), Viton |
| Model | Displacement (cm³/rev) | Displacement (in³/rev) | Max Pressure (bar) | Max Speed (min⁻¹) |
|---|---|---|---|---|
| PLM 10-1 | 1.07 | 0.07 | 260 | 4000 |
| PLM 10-1.5 | 1.60 | 0.10 | 260 | 4000 |
| PLM 10-2 | 2.13 | 0.13 | 260 | 4000 |
| PLM 10-2.5 | 2.67 | 0.16 | 260 | 4000 |
| PLM 10-3.15 | 3.34 | 0.20 | 260 | 4000 |
| PLM 10-4 | 4.27 | 0.26 | 250 | 4000 |
| PLM 10-5 | 5.34 | 0.33 | 250 | 4000 |
| PLM 10-5.8 | 6.20 | 0.38 | 230 | 4000 |
| PLM 10-6.3 | 6.67 | 0.41 | 230 | 4000 |
| PLM 10-8 | 8.51 | 0.52 | 180 | 4000 |
| PLM 10-10 | 10.67 | 0.65 | 140 | 4000 |
Data source: Technical data table
| Flange Type | Code | Bolt Pattern | Shaft Height (mm) |
|---|---|---|---|
| European | E1 | 4 × M6, 40×40 mm | 11.3 |
| European | E7 | 4 × M6, 40×40 mm | 11.3 |
| European | E8 | 4 × M6, 40×40 mm | 11.3 |
| German 2-bolt | B1 | 2 × M6, 64 mm spacing | 11.3 |
| German 4-bolt | K2 | 4 × M6, 42×42 mm | 11.3 |
| SAE AA 2-bolt | S0 | 2 × 1/4"-20 UNC, 82.5 mm spacing | 11.3 |
| SAE AA 2-4 bolt | R9 | 2/4 × 5/16"-18 UNC | 11.3 |
| SAE 2-4 bolt | R8 | 2/4 × 5/16"-18 UNC | 11.3 |
| SAE 2-bolt | W9 | 2 × 5/16"-18 UNC | 11.3 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 81 | European tapered 1:8 | Key 3×5 mm |
| 86 | European tapered 1:8 | Key 3×5 mm |
| 02 | SAE AA spline (9 teeth) | 16/32 pitch |
| 30 | SAE AA straight | Key 3.18×18 mm |
| 36 | SAE straight | Key 3.18×18 mm |
| 29 | Straight | Key 3×8 mm |
| Port Code | Type | Standard |
|---|---|---|
| BB/BA | German flanged | 4-bolt, M6 |
| GC/GC | Gas BSPP | G 1/8" – G 1/4" |
| OB/OA | SAE ODT | 7/16"-20 UNF – 9/16"-18 UNF |
The Casappa PLM 10 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. This positive-displacement design delivers torque proportional to pressure differential and speed proportional to flow rate.
Looking to replace an existing gear motor with a Casappa PLM 10? Here's what to check:
The Casappa PLM 10 series is commonly used in:
> Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which PLM 10 displacement or configuration fits your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model code and flange/shaft combination.
Q: What is the maximum pressure of the Casappa PLM 10?
A: The PLM 10 series handles up to 260 bar continuous pressure for smaller displacements. Larger displacements are rated at 140–250 bar depending on model.
Q: How do I calculate motor torque?
A: Use M = Δp × V × ηm / 62.83 (Nm), where Δp is pressure drop (bar), V is displacement (cm³/rev), and ηm is mechanical efficiency (≈0.85).
Q: Can I replace an older Casappa motor with a PLM 10?
A: Yes, in most cases. Verify displacement, flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for Casappa PLM 10 motors?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the R suffix mean in the model code?
A: R indicates reversible rotation with external drain. Other options: S (left-hand), D (right-hand), L (reversible side external drain), B (reversible internal drain).
Q: Do you provide the How to Order guide for PLM 10?
A: Yes. See Casappa How to Order for the complete model code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLM 10 unit?
A: Yes. HYRIG supplies complete PLM 10 series motors. Send us the nameplate details and we will confirm the correct replacement configuration.
For Casappa PLM 10 gear motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 10 Gear Pumps, Casappa PLM 20 Gear Motors, Casappa PLM 10-5 Gear Motor, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.