HYRIG can supply the Casappa PLM 20-25 gear motor. The Casappa PLM 20-25 is a 26.42 cm³/rev external gear motor rated at 170 bar continuous pressure and 2800 min⁻¹ maximum speed, part of the PLM 20 series for mobile and industrial hydraulic drives.
| Parameter | Value |
|---|---|
| Model | PLM 20-25 |
| Type | External gear motor |
| Displacement | 26.42 cm³/rev (1.61 in³/rev) |
| Max continuous pressure | 170 bar (2465 psi) |
| Max peak pressure | 200 bar (2900 psi) |
| Max speed | 2800 min⁻¹ |
| Min speed | 500 min⁻¹ |
| Mounting flanges | E2, B2, B4, S1, S2, S9, S5 |
| Port types | German/European flanged, SAE SSM/SSS, BSPP, SAE ODT |
| Parameter | Value |
|---|---|
| Displacement | 26.42 cm³/rev |
| Theoretical torque at 170 bar | 60.6 Nm |
| Theoretical torque at 200 bar | 71.3 Nm |
| Max continuous pressure | 170 bar |
| Max peak pressure | 200 bar |
| Max speed | 2800 min⁻¹ |
Data source: Technical data table
| Flange Code | Bolt Pattern | Pilot Ø (mm) | Shaft Height (mm) |
|---|---|---|---|
| E2 | 4 × M8, 40×40 mm | 36.5 | 16 |
| B2 | 2 × M8, 72 mm spacing | 36.5 | 16 |
| B4 | 4 × M8, 60×60 mm | 36.5 | 16 |
| S1 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S2 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S9 | 2 × 3/8"-16 UNC, 106.2 mm | 82.55 | 16 |
| S5 | 2 × 1/2"-13 UNC, 146 mm | 101.6 | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 82 | European tapered 1:8 | Key 3×5 mm |
| 54 | German tapered 1:5 | Key 3×6.5 mm |
| 55 | German tapered 1:5 | Key 4×6.5 mm |
| 46 | Straight | Key 5×25 mm |
| 03 | SAE "A" spline (9 teeth) | 16/32 pitch |
| 01 | SAE spline (10 teeth) | 16/32 pitch |
| 31 | SAE "A" straight | Key 3.18×18 mm |
| 04 | SAE "B" spline | 16/32 pitch |
| 32 | SAE "B" straight | Key 6.35×25.4 mm |
| 12 | DIN 5482 spline | B 17×14×9 |
| Port Code | Type | Size |
|---|---|---|
| BE/BC | German flanged | M6/M8, 4-bolt |
| EA/EB | European flanged | M6/M8, 4-bolt |
| MA/MB | SAE flanged (SSM) | 3000 psi, 4-bolt |
| SA/SB | SAE flanged (SSS) | 3000 psi, 4-bolt |
| GD/GE | Gas BSPP | G 1/2" – G 3/4" |
| OC/OD | SAE ODT | 3/4"-16 UNF – 1 1/16"-12 UNF |
The Casappa PLM 20-25 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. The 26.42 cm³/rev displacement delivers approximately 61 Nm at 170 bar, making it suitable for mid-to-high torque hydraulic drives.
Looking to replace a Casappa PLM 20-25 or find an equivalent? Here's what to check:
The Casappa PLM 20-25 is commonly used in:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the PLM 20-25 is the right displacement for your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model and configuration.
Q: What is the torque of the Casappa PLM 20-25 at 170 bar?
A: The PLM 20-25 delivers approximately 61 Nm at 170 bar (170 × 26.42 × 0.85 / 62.83).
Q: What is the maximum pressure of the PLM 20-25?
A: The PLM 20-25 is rated at 170 bar continuous pressure and 200 bar peak pressure.
Q: Why is the PLM 20-25 pressure lower than smaller displacements?
A: Larger displacement gear motors have lower pressure ratings due to increased bearing loads and internal leakage. The 26.42 cm³/rev displacement limits continuous pressure to 170 bar.
Q: Can I replace an older Casappa motor with a PLM 20-25?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for the Casappa PLM 20-25?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the model code PLM 20-25 mean?
A: PLM = motor series, 20 = group size, 25 = nominal displacement (26.42 cm³/rev actual). See Casappa How to Order for full code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLM 20-25 unit?
A: Yes. HYRIG supplies complete PLM 20-25 motors. Send us the nameplate details for confirmation.
For Casappa PLM 20-25 gear motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLM 20 Gear Motors, Casappa PLM 20-14 Gear Motor, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.