HYRIG can supply the Casappa PLM 30-34 gear motor. The Casappa PLM 30-34 is a 34.55 cm³/rev external gear motor rated at 240 bar continuous pressure and 3000 min⁻¹ maximum speed, part of the PLM 30 series for high-torque hydraulic drives.
| Parameter | Value |
|---|---|
| Model | PLM 30-34 |
| Type | External gear motor |
| Displacement | 34.55 cm³/rev (2.11 in³/rev) |
| Max continuous pressure | 240 bar (3480 psi) |
| Max peak pressure | 270 bar (3916 psi) |
| Max speed | 3000 min⁻¹ |
| Min speed | 500 min⁻¹ |
| Mounting flanges | E3, E4, B3, S5, U3 |
| Port types | German/European flanged, SAE SSM/SSS, BSPP, SAE ODT |
| Parameter | Value |
|---|---|
| Displacement | 34.55 cm³/rev |
| Theoretical torque at 200 bar | 93.5 Nm |
| Theoretical torque at 240 bar | 112.2 Nm |
| Max continuous pressure | 240 bar |
| Max peak pressure | 270 bar |
| Max speed | 3000 min⁻¹ |
Data source: Technical data table
| Flange Code | Bolt Pattern | Pilot Ø (mm) | Shaft Height (mm) |
|---|---|---|---|
| E3 | 4 × M10, 98×98 mm | 50.8 | 23.5 |
| E4 | 4 × M10, 114.3×114.3 mm | 60 | 23.5 |
| B3 | 2 × M10, 72 mm spacing | 60 | 23.5 |
| S5 | 2 × 1/2"-13 UNC, 146 mm | 101.6 | 23.5 |
| U3 | 2 × 1/2"-13 UNC | 101.6 | 23.5 |
| Shaft Code | Type | Keyway / Spline |
|---|---|---|
| 83 | European tapered 1:8 | Key 4×7.5 mm |
| 84 | European tapered 1:8 | Key 4.75×10 mm |
| 56 | German tapered 1:5 | Key 5×7.5 mm |
| 41 | Straight | Key 6×6×25 mm |
| A8 | SAE B spline | 13 teeth, 16/32 pitch |
| A5 | SAE BB spline | 15 teeth, 16/32 pitch |
| 04 | SAE B spline | 13 teeth, 16/32 pitch |
| 05 | SAE BB spline | 15 teeth, 16/32 pitch |
| 32 | SAE B straight | Key 6.35×25.4 mm |
| 33 | SAE BB straight | Key 6.35×32 mm |
| Port Code | Type | Size |
|---|---|---|
| BM/BL | German flanged | M8, 4-bolt |
| ED/EB | European flanged | M8/M10, 4-bolt |
| MB/MA | SAE flanged (SSM) | 3000 psi, 4-bolt |
| SB/SA | SAE flanged (SSS) | 3000 psi, 4-bolt |
| GF/GF | Gas BSPP | G 1" – G 1 1/2" |
| OF/OD | SAE ODT | 1 5/16"-12 UNF – 1 7/8"-12 UNF |
The Casappa PLM 30-34 is an external gear motor. Hydraulic flow enters the motor and drives two intermeshing gears. The pressure difference between inlet and outlet creates torque on the gears, producing mechanical rotation and torque at the output shaft. The 34.55 cm³/rev displacement delivers approximately 94 Nm at 200 bar, making it suitable for high-torque hydraulic drives on heavy mobile and industrial equipment.
Looking to replace a Casappa PLM 30-34 or find an equivalent? Here's what to check:
The Casappa PLM 30-34 is commonly used in:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the PLM 30-34 is the right displacement for your system? Send HYRIG your required torque (Nm), speed (RPM), and mounting constraints. Our engineers will confirm the correct model and configuration.
Q: What is the torque of the Casappa PLM 30-34 at 200 bar?
A: The PLM 30-34 delivers approximately 94 Nm at 200 bar (200 × 34.55 × 0.85 / 62.83).
Q: What is the maximum pressure of the PLM 30-34?
A: The PLM 30-34 is rated at 240 bar continuous pressure and 270 bar peak pressure.
Q: Can I replace an older Casappa motor with a PLM 30-34?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.
Q: What is the lead time for the Casappa PLM 30-34?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: What does the model code PLM 30-34 mean?
A: PLM = motor series, 30 = group size, 34 = nominal displacement (34.55 cm³/rev actual). See Casappa How to Order for full code breakdown.
Q: Can HYRIG support repair or replacement of a complete PLM 30-34 unit?
A: Yes. HYRIG supplies complete PLM 30-34 motors. Send us the nameplate details for confirmation.
For Casappa PLM 30-34 gear motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLM 30 Gear Motors, Casappa PLM 30-51 Gear Motor, Casappa How to Order.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.