Casappa PLP 20-20 Gear Pump | 21.14 cm³/rev 200 bar

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Casappa PLP 20-20 gear pump. The Casappa PLP 20-20 is a 21.14 cm³/rev external gear pump rated at 200 bar continuous pressure and 3000 min⁻¹ maximum speed, part of the PLP 20 series for mobile and industrial hydraulic systems.
Conatct For Details
DetailReview(0)Additional

Casappa PLP 20-20 Gear Pump | 21.14 cm³/rev 200 bar

HYRIG can supply the Casappa PLP 20-20 gear pump. The Casappa PLP 20-20 is a 21.14 cm³/rev external gear pump rated at 200 bar continuous pressure and 3000 min⁻¹ maximum speed, part of the PLP 20 series for mobile and industrial hydraulic systems.

Key Facts

ParameterValue
ModelPLP 20-20
TypeExternal gear pump
Displacement21.14 cm³/rev (1.29 in³/rev)
Max continuous pressure200 bar (2900 psi)
Max peak pressure230 bar (3336 psi)
Max speed3000 min⁻¹
Min speed500 min⁻¹
Mounting flangesE2, B2, B4, S1, S2, S9, S5
Port typesGerman/European flanged, SAE SSM/SSS, BSPP, SAE ODT

PLP 20-20 Specifications & Flow Rate

ParameterValue
Displacement21.14 cm³/rev
Theoretical flow at 1000 RPM21.14 L/min
Theoretical flow at 2000 RPM42.28 L/min
Theoretical flow at 3000 RPM63.42 L/min
Max continuous pressure200 bar
Max peak pressure230 bar
Max speed3000 min⁻¹

Data source: Technical data table

Dimensions

Mounting Flange Options

Flange CodeBolt PatternPilot Ø (mm)Shaft Height (mm)
E24 × M8, 40×40 mm36.516
B22 × M8, 72 mm spacing36.516
B44 × M8, 60×60 mm36.516
S12 × 3/8"-16 UNC, 106.2 mm82.5516
S22 × 3/8"-16 UNC, 106.2 mm82.5516
S92 × 3/8"-16 UNC, 106.2 mm82.5516
S52 × 1/2"-13 UNC, 146 mm101.623.5

Drive Shaft Options

Shaft CodeTypeKeyway / Spline
82European tapered 1:8Key 3×5 mm
54German tapered 1:5Key 3×6.5 mm
55German tapered 1:5Key 4×6.5 mm
46StraightKey 5×25 mm
03SAE "A" spline (9 teeth)16/32 pitch
01SAE spline (10 teeth)16/32 pitch
31SAE "A" straightKey 3.18×18 mm
04SAE "B" spline16/32 pitch
32SAE "B" straightKey 6.35×25.4 mm
12DIN 5482 splineB 17×14×9

Port Options

Port CodeTypeSize
BE/BCGerman flangedM6/M8, 4-bolt
EA/EBEuropean flangedM6/M8, 4-bolt
MA/MBSAE flanged (SSM)3000 psi, 4-bolt
SA/SBSAE flanged (SSS)3000 psi, 4-bolt
GD/GEGas BSPPG 1/2" – G 3/4"
OC/ODSAE ODT3/4"-16 UNF – 1 1/16"-12 UNF

Structure / Working Principle

The Casappa PLP 20-20 is an external gear pump. Two intermeshing gears rotate inside a precision-machined housing. Oil is trapped between the gear teeth and the housing wall, then forced from the suction side to the discharge side as the gears rotate. The 21.14 cm³/rev displacement delivers approximately 42 L/min at 2000 RPM, making it suitable for mid-to-high flow hydraulic circuits that require reliable, pulse-free flow.

Cross-Reference & Replacement

Looking to replace a Casappa PLP 20-20 or find an equivalent? Here's what to check:/n/n1. Displacement — Confirm 21.14 cm³/rev matches your flow requirement.

  1. Mounting flange — Identify your existing flange code (E2, B2, B4, S1, S2, S9, or S5).
  2. Drive shaft — Verify shaft type and keyway dimensions.
  3. Port connections — Check thread type and port size.
  4. Rotation — Confirm S, D, R, L, or B rotation code.

Applications

The Casappa PLP 20-20 is commonly used in:/n/n- Mobile hydraulic systems — mid-size tractor steering and implement circuits, telehandler lift functions

  • Industrial power units — hydraulic press clamping circuits, injection molding machine actuators
  • Material handling — forklift mast and tilt functions, reach truck lift systems
  • Municipal equipment — snow plow blade actuation, street sweeper hydraulic drives
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the PLP 20-20 is the right displacement for your system? Send HYRIG your required flow rate (L/min) and operating pressure (bar). Our engineers will confirm the correct model and configuration.

Frequently Asked Questions

Q: What is the flow rate of the Casappa PLP 20-20 at 2000 RPM?
A: The PLP 20-20 delivers approximately 42 L/min at 2000 RPM (21.14 cm³/rev × 2000 × 0.97 / 1000).

Q: What is the maximum pressure of the PLP 20-20?
A: The PLP 20-20 is rated at 200 bar continuous pressure and 230 bar peak pressure.

Q: Can I replace an older Casappa pump with a PLP 20-20?
A: Yes, in most cases. Verify flange bolt pattern, shaft type, and port threads match your existing unit.

Q: What is the lead time for the Casappa PLP 20-20?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.

Q: What does the model code PLP 20-20 mean?
A: PLP = pump series, 20 = group size, 20 = nominal displacement (21.14 cm³/rev actual). See Casappa How to Order for full code breakdown.

Q: Can HYRIG support repair or replacement of a complete PLP 20-20 unit?
A: Yes. HYRIG supplies complete PLP 20-20 pumps. Send us the nameplate details for confirmation.

Contact

For Casappa PLP 20-20 gear pump selection, contact HYRIG: info@hyrig.com

Explore: Casappa PLP 20 Gear Pumps, Casappa PLP 20-14 Gear Pump, Casappa PLP 20-31.5 Gear Pump, Casappa How to Order.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit