HYRIG can supply the Casappa PLP and PLM series gear pumps and motors. The Casappa Polaris range covers external gear pumps and motors with displacements from 1.07 to 91.10 cm³/rev and maximum continuous pressure up to 250 bar, designed for mobile and industrial hydraulic systems.
| Parameter | Value |
|---|---|
| Product types | External gear pumps (PLP) and gear motors (PLM) |
| Series | PLP 10, PLP 20, PLP 30, PLM 10, PLM 20, PLM 30 |
| Displacement range | 1.07–91.10 cm³/rev |
| Max continuous pressure | up to 250 bar |
| Mounting flanges | European, SAE A/AA/B, German 2/4 bolt |
| Port types | Flanged, BSPP, SAE ODT |
| Seal options | Buna N (standard), Viton |
| Series | Type | Displacement (cm³/rev) | Max Pressure (bar) |
|---|---|---|---|
| PLP 10 | Gear pump | 1.07–10.67 | 250 |
| PLP 20 | Gear pump | 4.95–33.03 | 250 |
| PLP 30 | Gear pump | 21.99–91.10 | 250 |
| PLM 10 | Gear motor | 1.07–10.67 | 260 |
| PLM 20 | Gear motor | 4.95–33.03 | 250 |
| PLM 30 | Gear motor | 21.99–91.10 | 250 |
Data source: Technical data table
The Casappa PLP series are external gear pumps. Two intermeshing gears rotate inside a precision-machined housing, trapping oil between the gear teeth and the housing wall and forcing it from suction to discharge. This positive-displacement design delivers constant flow proportional to shaft speed.
The PLM series are external gear motors that operate in reverse: hydraulic flow drives the gears, producing mechanical rotation and torque.
The Casappa PLP and PLM series are commonly used in:
> Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which Casappa series fits your system? Send HYRIG your required flow rate (L/min), operating pressure (bar), and mounting constraints. Our engineers will confirm the correct model code and configuration.
Q: What is the difference between PLP and PLM series?
A: PLP series are gear pumps (mechanical to hydraulic power). PLM series are gear motors (hydraulic to mechanical power).
Q: What is the maximum pressure of the Casappa Polaris range?
A: The PLP and PLM series handle up to 250 bar continuous pressure, with PLM 10 rated up to 260 bar.
Q: How do I choose the right displacement?
A: Match the cm³/rev to your required flow rate at operating speed. Use Q = V × n × ηv / 1000 (L/min).
Q: What is the lead time for Casappa gear pumps?
A: Standard lead time is 4–6 weeks for most configurations. Urgent downtime situations can be prioritized.
Q: Can HYRIG support repair or replacement of a complete unit?
A: Yes. HYRIG supplies complete PLP and PLM series units. Send us the nameplate details for confirmation.
For Casappa gear pump and motor selection, contact HYRIG: info@hyrig.com
Explore: Casappa PLP 10 Gear Pumps, Casappa PLP 20 Gear Pumps, Casappa PLP 30 Gear Pumps, Casappa PLM 10 Gear Motors, Casappa PLM 20 Gear Motors, Casappa PLM 30 Gear Motors.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.