Festo DSNU-16-25-P-A Cylinder | 16 mm Bore 25 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DSNU-16-25-P-A round cylinder. The FESTO DSNU-16-25-P-A is a double-acting round cylinder with a 16 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning. It delivers 120.6 N theoretical advance force and 103.7 N return force at 6 bar. It is the short-stroke variant of the DSNU-16, used where the travel is limited to 25 mm and the elastic cushioning is sufficient for the light load — small ejectors, short-stroke clamps, and compact positioning motions.
Conatct For Details
DetailReview(0)Additional

Festo DSNU-16-25-P-A Cylinder | 16 mm Bore 25 mm

HYRIG can supply the FESTO DSNU-16-25-P-A round cylinder. The FESTO DSNU-16-25-P-A is a double-acting round cylinder with a 16 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning. It delivers 120.6 N theoretical advance force and 103.7 N return force at 6 bar. It is the short-stroke variant of the DSNU-16, used where the travel is limited to 25 mm and the elastic cushioning is sufficient for the light load — small ejectors, short-stroke clamps, and compact positioning motions.

Key Facts



Piston diameter16 mm
Stroke25 mm
Mode of operationDouble-acting
CushioningP-A elastic, both ends
Theoretical force at 6 bar120.6 N advance / 103.7 N return
Port threadM5
Piston rod threadM6
StandardISO 6432
Working pressure1 bar … 10 bar
Basic weight at 0 mm stroke89.9 g
Order code19199

Festo DSNU-16 Model Specifications & Stroke Variants

ModelBoreStrokeCushioningForce at 6 bar advanceOrder code
DSNU-16-25-P-A16 mm25 mmP-A elastic120.6 N19199
DSNU-16-80-PPV-A16 mm80 mmPPV adjustable120.6 N19231

Explore the full range in the FESTO DSNU round cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 6432
Piston diameter16 mm
Stroke25 mm
Pneumatic connectionM5
Piston rod threadM6
Basic weight at 0 mm stroke89.9 g
CushioningP-A elastic, both ends
Working pressure1 bar … 10 bar
Impact energy in end positions0.15 J

Structure / Working Principle

The DSNU-16-25-P-A uses the same high-alloy stainless steel round body as the DSNU-16-80-PPV-A, but with P-A elastic end-position cushioning instead of adjustable pneumatic cushioning. The elastic cushioning absorbs the end-of-stroke impact through a fixed elastomer element — there is no cushioning screw, which simplifies commissioning but means the deceleration profile cannot be tuned to different loads.

The 16 mm bore produces 120.6 N theoretical advance force and 103.7 N return force at 6 bar. The 25 mm stroke keeps the overall body length short, so the cylinder fits into tight spaces where a longer stroke would interfere with the machine frame. The impact energy rating is 0.15 J per end position, the same as the PPV-A variant.

Applications

  • Short-stroke ejectors: where the ejector travel is limited to 25 mm and 120.6 N at 6 bar is sufficient to push the part out.
  • Compact clamps: where the clamp travel is short and the elastic cushioning is adequate for the light load.
  • Positioning of small components: where a short, fixed stroke is needed and cushioning adjustment is not required.
  • Replacement of existing DSNU-16-25 units: in machinery with ISO 6432 round cylinder mounting.

Selection Support

Not sure whether 25 mm stroke covers your travel, or need the 80 mm stroke with PPV adjustable cushioning? Send your required travel, load, cycle rate, and available space, and we will confirm the cylinder model and cushioning variant.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DSNU-16-25-P-A at 6 bar?
A: 120.6 N advance and 103.7 N return, based on the 16 mm piston area.

Q: Does the DSNU-16-25-P-A have adjustable cushioning?
A: No. The P-A suffix indicates elastic end-position cushioning without an adjustment screw. If adjustable cushioning is required, choose the PPV-A variant.

Q: What is the difference between P-A and PPV-A?
A: P-A is elastic cushioning with a fixed elastomer element; PPV-A is adjustable pneumatic cushioning with a tuning screw. Choose P-A for simple, low-cost applications; choose PPV-A when the load or speed changes and cushioning needs to be tuned.

Q: What is the impact energy rating?
A: 0.15 J per end position, the same as the PPV-A variant.

Q: What is the lead time for Festo DSNU-16-25-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DSNU-16-25-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit