Festo DSNU-16-80-PPV-A Cylinder | 16 mm Bore 80 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO DSNU-16-80-PPV-A round cylinder. The FESTO DSNU-16-80-PPV-A is a double-acting round cylinder with a 16 mm piston diameter, 80 mm stroke, and PPV adjustable pneumatic cushioning at both ends. It delivers 120.6 N theoretical advance force and 103.7 N return force at 6 bar. It is the smallest bore in the DSNU round cylinder range covered here, used for light-duty ejection, clamping, and positioning tasks where the compact stainless steel body fits a tight machine envelope.
Conatct For Details
DetailReview(0)Additional

Festo DSNU-16-80-PPV-A Cylinder | 16 mm Bore 80 mm

HYRIG can supply the FESTO DSNU-16-80-PPV-A round cylinder. The FESTO DSNU-16-80-PPV-A is a double-acting round cylinder with a 16 mm piston diameter, 80 mm stroke, and PPV adjustable pneumatic cushioning at both ends. It delivers 120.6 N theoretical advance force and 103.7 N return force at 6 bar. It is the smallest bore in the DSNU round cylinder range covered here, used for light-duty ejection, clamping, and positioning tasks where the compact stainless steel body fits a tight machine envelope.

Key Facts



Piston diameter16 mm
Stroke80 mm
Mode of operationDouble-acting
CushioningPPV adjustable pneumatic, both ends
Theoretical force at 6 bar120.6 N advance / 103.7 N return
Port threadM5
Piston rod threadM6
StandardISO 6432
Working pressure1 bar … 10 bar
Basic weight at 0 mm stroke89.9 g
Additional weight per 10 mm stroke4.6 g
Order code19231

Festo DSNU-16 Model Specifications & Stroke Variants

ModelBoreStrokeCushioningForce at 6 bar advanceOrder code
DSNU-16-80-PPV-A16 mm80 mmPPV adjustable120.6 N19231
DSNU-16-25-P-A16 mm25 mmP-A elastic120.6 N19199

Explore the full range in the FESTO DSNU round cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 6432
Piston diameter16 mm
Stroke80 mm
Pneumatic connectionM5
Piston rod threadM6
Basic weight at 0 mm stroke89.9 g
Additional weight per 10 mm stroke4.6 g
Calculated weight at 80 mm stroke≈ 126.7 g
Cushioning length12 mm
Impact energy in end positions0.15 J
Working pressure1 bar … 10 bar
Ambient temperature-20 °C … +80 °C

Structure / Working Principle

The DSNU-16-80-PPV-A is a round cylinder with a high-alloy stainless steel barrel and PPV adjustable pneumatic cushioning. Compressed air enters one of the two M5 ports and drives the piston; the PPV cushioning at both ends lets you tune exhaust air near end position, so the light load decelerates without hard impact. The cushioning length is 12 mm, and the impact energy rating is 0.15 J per end position.

The 16 mm bore produces 120.6 N theoretical advance force and 103.7 N return force at 6 bar — the lowest force in the DSNU range covered here. The M6 piston rod thread accepts small eye, clevis, or coupler attachments. The round body does not have the T-slot sensor geometry of a profile cylinder, so confirm the sensor mounting option if position feedback is required.

Applications

  • Light-duty ejection: pushing a small part out of a die or fixture where 120.6 N at 6 bar is sufficient and the 80 mm stroke covers the ejection distance.
  • Small clamps: holding a lightweight workpiece in a compact fixture, where the round body fits into a tight space.
  • Positioning of small sensors or stops: moving a sensor into position over an 80 mm travel, where the 16 mm bore provides enough force for the light load.
  • Replacement of existing DSNU-16-80 units: in machinery with ISO 6432 round cylinder mounting.

Selection Support

Not sure whether 120.6 N at 6 bar is sufficient for your load, or need the 20 mm or 25 mm bore for higher force? Send your load, required force, available space, and mounting orientation, and we will confirm the cylinder model and accessory combination.

Frequently Asked Questions

Q: What is the theoretical force of the Festo DSNU-16-80-PPV-A at 6 bar?
A: 120.6 N advance and 103.7 N return, based on the 16 mm piston area.

Q: What is the weight at 80 mm stroke?
A: Approximately 126.7 g, calculated from 89.9 g basic weight plus 4.6 g per 10 mm stroke (8 × 4.6 g).

Q: Does the DSNU-16-80-PPV-A have adjustable cushioning?
A: Yes. The PPV-A suffix indicates adjustable pneumatic cushioning at both ends, with a 12 mm cushioning length.

Q: What is the impact energy rating?
A: 0.15 J per end position. Confirm that the moving mass and velocity produce an impact energy within this limit.

Q: What is the lead time for Festo DSNU-16-80-PPV-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO DSNU-16-80-PPV-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit