HYRIG can supply the FESTO VSVA valve terminal range and its variants. The VSVA series includes solenoid valves in 18 mm and 26 mm widths, with 5/2 monostable, 5/2 bistable, 5/3 centre-closed, centre-pressurised, and centre-exhausted functions, as well as 2×3/2 variants. Flow rates range from 550 l/min for the 18 mm width to 1400 l/min for the 26 mm width. The valves mount on ISO 15407-1 or ISO 15407-2 sub-bases. This overview covers the VSVA model range, flow rates, and selection guidance.
| Series | VSVA, solenoid valve for valve terminals |
| Widths | 18 mm (ISO 15407-1) and 26 mm (ISO 15407-1 / -2) |
| Functions | 5/2 monostable, 5/2 bistable, 5/3 closed, 5/3 pressurised, 5/3 exhausted, 2×3/2 |
| Flow rates | 550 l/min (18 mm), 900–1400 l/min (26 mm) |
| Operating pressure | 3–8 bar (18 mm), -0.9–10 bar (26 mm variants) |
| Electrical connection | M12 central plug |
| Protection class | IP65 |
| Width | Function | Flow rate | Pressure range | Standard | Order code example |
|---|---|---|---|---|---|
| 18 mm | 5/2 monostable | 550 l/min | 3–8 bar | ISO 15407-1 | 546768 |
| 26 mm | 2×3/2 NC monostable | 900 l/min | 3–8 bar | ISO 15407-1 | 534552 |
| 26 mm | 5/2 bistable | 1100–1400 l/min | 3–8 bar | ISO 15407-1 | 534557 |
| 26 mm | 5/2 monostable, soft seal | 1100 l/min | -0.9–10 bar | ISO 15407-2 | 539159 |
| 26 mm | 5/3 centre closed | 1100 l/min | -0.9–10 bar | ISO 15407-2 | 539162 |
| 26 mm | 5/3 centre pressurised | 1000 l/min | 3–8 bar | ISO 15407-1 | 534561 |
| 26 mm | 5/3 centre exhausted | 1000 l/min | 3–8 bar | ISO 15407-1 | 534560 |
| 26 mm | 5/3 centre pressurised | 1000 l/min | -0.9–10 bar | ISO 15407-2 | 539160 |
| 26 mm | 5/3 centre exhausted | 1000 l/min | -0.9–10 bar | ISO 15407-2 | 539161 |
Data source: Technical data table.
The VSVA series uses a piston spool design with a central M12 plug. The 18 mm width is the narrowest slice, used where the valve terminal must fit inside a compact control cabinet. The 26 mm width provides higher flow rates and is available with hard sealing or soft sealing — soft sealing provides tighter shut-off for holding functions, while hard sealing is more tolerant of contaminated air.
The ISO 15407-1 and ISO 15407-2 standards define the sub-base interface and the pilot port arrangement. A valve on one standard cannot be mounted directly on a manifold for the other without an adapter. The 5/3 centre functions determine the cylinder behaviour when both solenoids are de-energized: centre-closed locks the cylinder, centre-pressurised holds it actively, and centre-exhausted releases it.
Not sure which VSVA width and function match your valve terminal? Send your cylinder size, required flow, fail-safe position, and manifold standard, and we will confirm the valve model and function variant. Explore specific VSVA models in the VSVA-B-M52-MH-A2-1R5L valve page and the VSVA-B-P53C-ZD-A1-1T1L valve page.
Q: What widths are available in the Festo VSVA series?
A: The VSVA series is available in 18 mm and 26 mm widths. The 18 mm width has a 550 l/min flow rate; the 26 mm width ranges from 900 l/min to 1400 l/min depending on the function.
Q: What is the difference between ISO 15407-1 and ISO 15407-2?
A: ISO 15407-1 and ISO 15407-2 use different sub-base interfaces and pilot port arrangements. A valve on one standard cannot be mounted directly on a manifold for the other without an adapter.
Q: What 5/3 centre functions are available?
A: Centre-closed (all ports blocked), centre-pressurised (supply connected to both actuator ports), and centre-exhausted (both actuator ports vented). The choice depends on whether the cylinder must hold position, hold force, or be free to move when the valve is centred.
Q: What is the maximum flow rate of the VSVA series?
A: 1400 l/min for the 26 mm width with 5/2 bistable function. The 18 mm width is rated at 550 l/min.
Q: Can VSVA valves be mixed on one manifold?
A: Yes, within the same ISO standard and width. Confirm the function-specific port pattern before mixing 5/2, 5/3, and 2×3/2 slices on one manifold.
For FESTO VSVA valve terminal selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.