HYRIG can supply the FESTO NPQM push-in fitting range and its variants. The NPQM series is a metal push-in fitting family with a nickel-plated brass body and NBR seal, rated from -0.95 bar vacuum to 16 bar. It includes straight connectors (D), 90° elbows (L), and T-shaped splitters (T), in tube sizes from 4 mm to 10 mm. This overview covers the NPQM model range, pressure and temperature limits, and selection guidance.
| Series | NPQM, metal push-in fitting |
| Body material | Nickel-plated brass |
| Seal material | NBR |
| Operating pressure | -0.95 bar … +16 bar |
| Ambient temperature | -20 °C … +70 °C |
| Tube sizes | 4 mm, 6 mm, 8 mm, 10 mm |
| Types | D (straight), L (90° elbow), T (tee) |
| Design | Push-pull release sleeve |
| Type | Tube OD | Nominal size | Operating pressure | Model example | Order code example |
|---|---|---|---|---|---|
| D (straight) | 4 mm | 3 mm | -0.95 … 16 bar | NPQM-D-Q4-E-P10 | 558760 |
| D (straight) | 6 mm | 5 mm | -0.95 … 16 bar | NPQM-D-Q6-E-P10 | 558761 |
| D (straight) | 8 mm | 7 mm | -0.95 … 16 bar | NPQM-D-Q8-E-P10 | 558762 |
| D (straight) | 10 mm | 9 mm | -0.95 … 16 bar | NPQM-D-Q10-E-P10 | 558763 |
| L (elbow) | 4 mm | 3 mm | -0.95 … 16 bar | NPQM-L-Q4-E-P10 | 558776 |
| L (elbow) | 6 mm | 5 mm | -0.95 … 16 bar | NPQM-L-Q6-E-P10 | 558777 |
| L (elbow) | 8 mm | 7 mm | -0.95 … 16 bar | NPQM-L-Q8-E-P10 | 558778 |
| L (elbow) | 10 mm | 9 mm | -0.95 … 16 bar | NPQM-L-Q10-E-P10 | 558779 |
| T (tee) | 4 mm | 3 mm | -0.95 … 16 bar | NPQM-T-Q4-E-P10 | 558785 |
| T (tee) | 6 mm | 5 mm | -0.95 … 16 bar | NPQM-T-Q6-E-P10 | 558787 |
| T (tee) | 8 mm | 7 mm | -0.95 … 16 bar | NPQM-T-Q8-E-P10 | 558788 |
| T (tee) | 10 mm | 9 mm | -0.95 … 16 bar | NPQM-T-Q10-E-P10 | 558789 |
Data source: Technical data table.
The NPQM series uses a push-pull release sleeve: insert the tubing until it bottoms out, and the internal collet grips the tube OD; pull the release sleeve to remove the tube. The nickel-plated brass body resists corrosion in workshop air and light water exposure, and the NBR seal provides a tight joint across the -0.95 to 16 bar range.
Compared with polymer-body push-in fittings (such as the QS series), the NPQM metal body is more resistant to accidental impact and higher temperature spikes, but it is heavier and not suitable for every mobile pneumatic application. The 16 bar maximum pressure is higher than most polymer fittings, which typically rated to 10–14 bar. The -0.95 bar lower limit supports vacuum circuits.
Not sure which NPQM type and tube size match your circuit? Send your tube OD, required flow, port thread, and available space, and we will confirm the fitting model and pack quantity. Explore specific NPQM models in the NPQM-D-Q4-E-P10 fitting page and the NPQM-D-Q8-E-P10 fitting page.
Q: What is the pressure range of the Festo NPQM series?
A: -0.95 bar to 16 bar across the full temperature range of -20 °C to +70 °C.
Q: What is the difference between NPQM and QS fittings?
A: NPQM uses a solid nickel-plated brass body and a push-pull release sleeve, rated to 16 bar. QS is a polymer-body push-in fitting series with a different release mechanism and a lower pressure rating.
Q: What NPQM types are available?
A: D (straight inline connector), L (90° elbow), and T (T-shaped splitter), in tube sizes 4 mm, 6 mm, 8 mm, and 10 mm.
Q: How is the NPQM fitting sold — individually or in packs?
A: NPQM fittings are typically supplied in multiples of 10. Confirm the pack quantity with HYRIG before ordering.
Q: Is NPQM suitable for vacuum?
A: Yes. The lower pressure limit is -0.95 bar, which covers typical vacuum pick-and-place and vacuum generation circuits.
For FESTO NPQM push-in fitting selection and pack quantities, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.