HYRIG can supply the FESTO VSVA-B-M52-MH-A2-1R5L solenoid valve. The FESTO VSVA-B-M52-MH-A2-1R5L is a 5/2 monostable directional control valve with a standard nominal flow rate of 550 l/min, an 18 mm valve width, and a 24 VDC solenoid with an M12 central plug. It is used on compact valve terminals where a narrow 18 mm slice is required, and the 550 l/min flow covers small to medium cylinders up to approximately 40 mm bore.
| Valve function | 5/2 monostable |
| Standard nominal flow rate | 550 l/min |
| Valve width | 18 mm |
| Operating pressure | 3 bar … 8 bar |
| Pilot pressure | 3 bar … 8 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Reset method | Mechanical spring |
| Weight | ~140 g |
| Order code | 546768 |
| Model | Function | Flow rate | Width | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-M52-MH-A2-1R5L | 5/2 monostable | 550 l/min | 18 mm | 3-8 bar | 546768 |
| VSVA-B-M52-MZH-A1-1R5L | 5/2 monostable | 550 l/min | 18 mm | 3-8 bar | 534546 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 18 mm |
| Pneumatic connection | Sub-base, 18 mm |
| Electrical connection | M12 central plug |
| Supply voltage | 24 VDC |
| Protection class | IP65 |
| Weight | ~140 g |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-M52-MH-A2-1R5L is a 5/2 monostable piston spool valve. In the de-energized state, a mechanical spring returns the spool to the normal position; when the 24 VDC solenoid is energized, the spool shifts and connects port 1 to port 4 while exhausting port 2 to port 3. When the solenoid is de-energized, the spring returns the spool and the cylinder port 4 exhausts to port 5.
The 18 mm width is the narrowest VSVA-B slice, used where the valve terminal must fit inside a compact control cabinet or on a machine frame with limited space. The M12 central plug carries both the solenoid signal and the LED status indicator, so no separate indicator wiring is needed. The IP65 rating covers dust and water jets from most machine-tool coolant and washdown environments — but confirm the actual exposure level if the terminal is mounted in a washdown zone.
Not sure whether the 550 l/min flow is sufficient for your cylinder size and cycle rate, or need the matching 26 mm VSVA-B slice for higher flow? Send your cylinder bore, stroke, cycle rate, supply pressure, and manifold width, and we will confirm the valve function and flow rating.
Q: What is the flow rate of the Festo VSVA-B-M52-MH-A2-1R5L?
A: 550 l/min standard nominal flow rate, measured according to the FESTO standard nominal flow definition.
Q: What is the operating pressure range of the VSVA-B-M52-MH-A2-1R5L?
A: 3 bar to 8 bar operating pressure, with a pilot pressure of 3 bar to 8 bar.
Q: What is the difference between VSVA-B 18 mm and 26 mm valves?
A: The 18 mm VSVA-B has a 550 l/min flow rate and is used where space is tight. The 26 mm VSVA-B has a 900–1100 l/min flow rate and is used for larger cylinders or higher cycle rates. The 18 mm valve uses a different manifold and cannot be mixed with 26 mm slices on the same terminal.
Q: Does the VSVA-B-M52-MH-A2-1R5L have an LED status indicator?
A: Yes. The M12 central plug includes an LED indicator that shows the solenoid status without separate wiring.
Q: What is the lead time for Festo VSVA-B-M52-MH-A2-1R5L?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-M52-MH-A2-1R5L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.