HYRIG can supply the FESTO VSVA-B-P53C-ZD-A1-1T1L solenoid valve. The FESTO VSVA-B-P53C-ZD-A1-1T1L is a 5/3 center closed directional control valve with a standard nominal flow rate of 1100 l/min, a 26 mm valve width to ISO 15407-2, and a 24 VDC solenoid with an M12 central plug. It is used where a double-acting cylinder must stop and hold position when the valve is centered, with both actuator ports closed and the supply port blocked.
| Valve function | 5/3 center closed |
| Standard nominal flow rate | 1100 l/min |
| Valve width | 26 mm (ISO 15407-2) |
| Operating pressure | -0.9 bar … 10 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Center position | All ports closed |
| Weight | ~300 g |
| Order code | 539162 |
| Model | Function | Flow rate | Width | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-P53C-ZD-A1-1T1L | 5/3 center closed | 1100 l/min | 26 mm | -0.9-10 bar | 539162 |
| VSVA-B-M52-MZD-A1-1T1L | 5/2 monostable | 1100 l/min | 26 mm | -0.9-10 bar | 539159 |
| VSVA-B-B52-H-A1-1R5L | 5/2 bistable | 1100 l/min | 26 mm | 3-8 bar | 534557 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-2 |
| Electrical connection | M12 central plug |
| Supply voltage | 24 VDC |
| Protection class | IP65 |
| Weight | ~300 g |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-P53C-ZD-A1-1T1L is a 5/3 center closed piston spool valve. When both solenoids are de-energized, the spool sits in the center position: port 1 (supply) is blocked, port 4 (actuator A) is closed, port 2 (actuator B) is closed, and ports 3 and 5 (exhaust) are blocked. The cylinder is hydraulically locked in its current position — air cannot enter or leave either cylinder chamber through the valve.
Energizing one solenoid shifts the spool to connect the supply to one actuator port and exhaust the other, moving the cylinder in one direction. Energizing the other solenoid reverses the flow. When power is removed, the spool returns to the center closed position, and the cylinder stops where it is. The 26 mm width provides a 1100 l/min flow rate, and the ISO 15407-2 mounting matches the high-flow VSVA-B range.
Not sure whether the center closed position provides sufficient holding for your load, or need the center exhaust or center pressure function instead? Send your cylinder bore, load, holding time, acceptable drift, and manifold width, and we will confirm the valve function and center position.
Q: What is the flow rate of the Festo VSVA-B-P53C-ZD-A1-1T1L?
A: 1100 l/min standard nominal flow rate.
Q: What does "center closed" mean for a 5/3 valve?
A: When both solenoids are de-energized, the spool sits in the center position with all ports closed: supply blocked, both actuator ports closed, and both exhaust ports blocked. The cylinder is locked in position through the valve, but the holding depends on spool leakage.
Q: Can the 5/3 center closed valve hold a cylinder indefinitely?
A: It holds position as long as the spool leakage is acceptable for the load. For long holding times or heavy loads, confirm the leakage rate and consider an additional pilot-operated check valve if drift is not acceptable.
Q: Does the VSVA-B-P53C-ZD-A1-1T1L use the same manifold as the 5/2 monostable variant?
A: Yes. Both use the 26 mm ISO 15407-2 sub-base. Confirm the function-specific port pattern before mixing 5/3 and 5/2 slices on one manifold.
Q: What is the lead time for Festo VSVA-B-P53C-ZD-A1-1T1L?
A: Standard lead time is 6–7 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-P53C-ZD-A1-1T1L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.