HYRIG can supply the FESTO VSVA-B-P53U-H-A1-1R5L solenoid valve. The FESTO VSVA-B-P53U-H-A1-1R5L is a 5/3 pressurised directional control valve with a standard nominal flow rate of 1000 l/min, a 26 mm valve width to ISO 15407-1, and a 24 VDC solenoid with an M12 central plug. In the centre position, the supply port remains connected to both actuator ports, holding a double-acting cylinder actively pressurised on both sides — used where the cylinder must resist an external load in the mid-position without drifting.
| Valve function | 5/3 pressurised (mid-position pressure) |
| Standard nominal flow rate | 1000 l/min |
| Valve width | 26 mm (ISO 15407-1) |
| Operating pressure | 3 bar … 8 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Order code | 534561 |
| Model | Function | Flow rate | Standard | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-P53U-H-A1-1R5L | 5/3 pressurised | 1000 l/min | ISO 15407-1 | 3-8 bar | 534561 |
| VSVA-B-P53E-H-A1-1R5L | 5/3 exhausted | 1000 l/min | ISO 15407-1 | 3-8 bar | 534560 |
| VSVA-B-B52-H-A1-1R5L | 5/2 bistable | 1100 l/min | ISO 15407-1 | 3-8 bar | 534557 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-1 |
| Electrical connection | M12 central plug |
| Protection class | IP65 |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-P53U-H-A1-1R5L is a 5/3 pressurised piston spool valve. When both solenoids are de-energized, the spool sits in the centre position with port 1 (supply) connected to both port 4 and port 2. Both chambers of a double-acting cylinder remain pressurised, creating a pneumatic cushion that resists external forces and prevents the cylinder from drifting under load.
Unlike a centre-closed valve, which locks the cylinder by blocking both ports (and depends on spool leakage for holding), the pressurised centre keeps the cylinder actively held by supply pressure. This is useful when the cylinder must maintain force against a load in the mid-position, and when the supply pressure is stable. The 26 mm ISO 15407-1 sub-base provides a 1000 l/min standard nominal flow rate, and the M12 central plug carries both solenoid signals and LED status indicators.
Not sure whether the pressurised centre is the correct holding strategy for your load, or need the centre-closed or centre-exhausted function instead? Send your cylinder bore, load, holding requirement, supply pressure stability, and manifold standard, and we will confirm the valve function and centre position.
Q: What is the flow rate of the Festo VSVA-B-P53U-H-A1-1R5L?
A: 1000 l/min standard nominal flow rate, with a valve flow rate of 1400 l/min and a manifold flow rate of 1100 l/min.
Q: What does "pressurised centre" mean for a 5/3 valve?
A: In the centre position, the supply port remains connected to both actuator ports. The cylinder is held by supply pressure on both sides, not by blocked ports. This resists external loads, but the holding force depends on supply pressure stability.
Q: What is the difference between pressurised centre and closed centre?
A: Pressurised centre keeps the cylinder actively held by supply pressure. Closed centre blocks both ports and holds position through spool leakage. Pressurised centre is better for resisting external loads; closed centre is better for stopping motion without maintaining force.
Q: Does the VSVA-B-P53U-H-A1-1R5L use the same manifold as the exhausted-centre variant?
A: Yes. Both use the 26 mm ISO 15407-1 sub-base. Confirm the function-specific port pattern before mixing centre functions on one manifold.
Q: What is the lead time for Festo VSVA-B-P53U-H-A1-1R5L?
A: Standard lead time is 5–6 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-P53U-H-A1-1R5L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.