HYRIG can supply the FESTO VSVA-B-P53E-H-A1-1R5L solenoid valve. The FESTO VSVA-B-P53E-H-A1-1R5L is a 5/3 exhausted directional control valve with a standard nominal flow rate of 1000 l/min, a 26 mm valve width to ISO 15407-1, and a 24 VDC solenoid with an M12 central plug. In the centre position, both actuator ports exhaust to atmosphere, so a double-acting cylinder is de-pressurised and free to move — used where the cylinder must be released or allowed to float in the mid-position.
| Valve function | 5/3 exhausted (mid-position exhaust) |
| Standard nominal flow rate | 1000 l/min |
| Valve width | 26 mm (ISO 15407-1) |
| Operating pressure | 3 bar … 8 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Order code | 534560 |
| Model | Function | Flow rate | Standard | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-P53E-H-A1-1R5L | 5/3 exhausted | 1000 l/min | ISO 15407-1 | 3-8 bar | 534560 |
| VSVA-B-P53U-H-A1-1R5L | 5/3 pressurised | 1000 l/min | ISO 15407-1 | 3-8 bar | 534561 |
| VSVA-B-B52-H-A1-1R5L | 5/2 bistable | 1100 l/min | ISO 15407-1 | 3-8 bar | 534557 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-1 |
| Electrical connection | M12 central plug |
| Protection class | IP65 |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-P53E-H-A1-1R5L is a 5/3 exhausted piston spool valve. When both solenoids are de-energized, the spool sits in the centre position with port 1 (supply) blocked and both actuator ports (4 and 2) connected to exhaust (5 and 3). The cylinder chambers are vented, so the piston can be moved freely by an external force or by gravity.
The exhausted centre is used when the cylinder must be de-pressurised in the mid-position — for example, to allow manual intervention, to release a clamp, or to let a vertical load descend under control by an external brake. Unlike a pressurised centre, which holds the cylinder actively, or a closed centre, which locks it, the exhausted centre removes all pneumatic force from the actuator. The 26 mm ISO 15407-1 sub-base provides a 1000 l/min standard nominal flow rate.
Not sure whether the exhausted centre is the correct strategy for your mid-position requirement, or need the pressurised or closed centre instead? Send your cylinder orientation, load type, required mid-position behaviour, and manifold standard, and we will confirm the valve function and centre position.
Q: What is the flow rate of the Festo VSVA-B-P53E-H-A1-1R5L?
A: 1000 l/min standard nominal flow rate, standardised to DIN 1343.
Q: What does "exhausted centre" mean for a 5/3 valve?
A: In the centre position, both actuator ports are connected to exhaust. The cylinder chambers are vented, so the piston can be moved by an external force without pneumatic resistance.
Q: What is the difference between exhausted centre and closed centre?
A: Exhausted centre vents both cylinder chambers to atmosphere; closed centre blocks both ports and holds position through spool leakage. Exhausted centre is used when the actuator must be free to move; closed centre is used when the actuator must hold position.
Q: Does the VSVA-B-P53E-H-A1-1R5L use the same manifold as the pressurised-centre variant?
A: Yes. Both use the 26 mm ISO 15407-1 sub-base. Confirm the function-specific port pattern before mixing centre functions on one manifold.
Q: What is the lead time for Festo VSVA-B-P53E-H-A1-1R5L?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-P53E-H-A1-1R5L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.