HYRIG can supply the FESTO VSVA-B-P53E-ZD-A1-1T1L solenoid valve. The FESTO VSVA-B-P53E-ZD-A1-1T1L is a 5/3 exhausted directional control valve with a standard nominal flow rate of 1000 l/min, a 26 mm valve width to ISO 15407-2, and a 24 VDC solenoid with an M12 central plug. In the centre position, both actuator ports exhaust to atmosphere, so a double-acting cylinder is de-pressurised and free to move — and the -0.9 bar lower pressure limit allows the valve to be used in vacuum circuits as well.
| Valve function | 5/3 exhausted (mid-position exhaust) |
| Standard nominal flow rate | 1000 l/min |
| Valve width | 26 mm (ISO 15407-2) |
| Operating pressure | -0.9 bar … 10 bar |
| Pilot pressure | 3 bar … 10 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug |
| Protection class | IP65 |
| Order code | 539161 |
| Model | Function | Flow rate | Standard | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-P53E-ZD-A1-1T1L | 5/3 exhausted | 1000 l/min | ISO 15407-2 | -0.9-10 bar | 539161 |
| VSVA-B-P53U-ZD-A1-1T1L | 5/3 pressurised | 1000 l/min | ISO 15407-2 | -0.9-10 bar | 539160 |
| VSVA-B-M52-MZD-A1-1T1L | 5/2 monostable | 1100 l/min | ISO 15407-2 | -0.9-10 bar | 539159 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-2 |
| Electrical connection | M12 central plug |
| Protection class | IP65 |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-P53E-ZD-A1-1T1L is a 5/3 exhausted piston spool valve on the ISO 15407-2 sub-base. In the centre position, port 1 (supply) is blocked and both actuator ports (4 and 2) are connected to exhaust (5 and 3). The cylinder chambers are vented, so the piston can be moved by an external force or by gravity without pneumatic resistance.
The ISO 15407-2 standard differs from ISO 15407-1 in the pilot port arrangement and the sub-base interface, so this valve cannot be mixed with ISO 15407-1 slices on the same manifold without an adapter. The operating pressure range extends to -0.9 bar, so the valve can also control vacuum circuits in addition to compressed air actuators up to 10 bar.
Not sure whether the ISO 15407-2 interface matches your existing manifold, or need the pressurised-centre or closed-centre variant instead? Send your manifold standard, cylinder orientation, required mid-position behaviour, and vacuum requirement, and we will confirm the valve function and interface.
Q: What is the flow rate of the Festo VSVA-B-P53E-ZD-A1-1T1L?
A: 1000 l/min standard nominal flow rate, standardised to DIN 1343.
Q: What does "exhausted centre" mean for a 5/3 valve?
A: In the centre position, both actuator ports are connected to exhaust. The cylinder chambers are vented, so the piston can be moved by an external force without pneumatic resistance.
Q: What is the difference between ISO 15407-1 and ISO 15407-2 for VSVA valves?
A: ISO 15407-1 and ISO 15407-2 use different sub-base interfaces and pilot port arrangements. A valve on one standard cannot be mounted directly on a manifold for the other without an adapter.
Q: Can the VSVA-B-P53E-ZD-A1-1T1L be used in vacuum circuits?
A: Yes. The operating pressure range extends to -0.9 bar, so the valve can control vacuum ejectors and vacuum release functions in addition to compressed air actuators.
Q: What is the lead time for Festo VSVA-B-P53E-ZD-A1-1T1L?
A: Standard lead time is 5–6 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-P53E-ZD-A1-1T1L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.