HYRIG can supply the FESTO VSVA-B-T32C-AH-A1-1R5L solenoid valve. The FESTO VSVA-B-T32C-AH-A1-1R5L is a 2×3/2 normally closed monostable valve with a standard nominal flow rate of 900 l/min, a 26 mm valve width to ISO 15407-1, and a 24 VDC solenoid with an M12 central plug. It is used for safety-related exhaust functions and for controlling two separate single-acting actuators from one valve slice, where the 26 mm width provides higher flow than the 18 mm VSVA-B range.
| Valve function | 2×3/2 normally closed, monostable |
| Standard nominal flow rate | 900 l/min |
| Valve width | 26 mm (ISO 15407-1) |
| Operating pressure | 3 bar … 8 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Reset method | Pneumatic spring |
| Weight | ~270 g |
| Order code | 534552 |
| Model | Function | Flow rate | Width | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-T32C-AH-A1-1R5L | 2×3/2 NC monostable | 900 l/min | 26 mm | 3-8 bar | 534552 |
| VSVA-B-B52-H-A1-1R5L | 5/2 bistable | 1100 l/min | 26 mm | 3-8 bar | 534557 |
| VSVA-B-M52-MZD-A1-1T1L | 5/2 monostable | 1100 l/min | 26 mm | -0.9-10 bar | 539159 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-1 |
| Electrical connection | M12 central plug |
| Supply voltage | 24 VDC |
| Protection class | IP65 |
| Weight | ~270 g |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-T32C-AH-A1-1R5L is a 2×3/2 normally closed monostable valve. Each 3/2 section has its own solenoid and pneumatic spring; when energized, the section opens to supply the corresponding actuator port; when de-energized, the pneumatic spring returns the spool and the port exhausts. The two sections operate independently, so one slice can control two separate single-acting cylinders or two pilot ports on a larger valve.
The 26 mm width provides a 900 l/min flow rate, which sits between the 18 mm VSVA-B (550 l/min) and the 26 mm high-flow VSVA-B variants (1100 l/min). The M12 central plug carries both solenoid signals and the LED status indicators. The IP65 rating covers dust and water jets from most machine-tool coolant and washdown environments.
Not sure whether a 2×3/2 valve is the correct function for your two-actuator control, or need the matching 5/2 or 5/3 function for a double-acting cylinder? Send your actuator type, required fail-safe position, flow requirement, and manifold width, and we will confirm the valve function and flow rating.
Q: What is the flow rate of the Festo VSVA-B-T32C-AH-A1-1R5L?
A: 900 l/min standard nominal flow rate, per 3/2 section.
Q: What is the difference between 2×3/2 and 5/2 valve functions?
A: A 2×3/2 valve contains two independent 3/2 sections, each with its own solenoid and spring. It is used for two single-acting actuators or two independent on/off functions. A 5/2 valve is a single spool that connects a double-acting cylinder in both directions. They are not interchangeable for the same actuator.
Q: Is the 2×3/2 normally closed when de-energized?
A: Yes. The 2×3/2 sections are normally closed; when the solenoid is de-energized, the pneumatic spring returns the spool and the actuator port exhausts. This provides a defined fail-safe position for single-acting actuators.
Q: Does the VSVA-B-T32C-AH-A1-1R5L use the same 26 mm manifold as the 5/2 VSVA-B valves?
A: Yes. All 26 mm VSVA-B slices mount on the same ISO 15407-1 sub-base, but confirm the function-specific port pattern before mixing functions on one manifold.
Q: What is the lead time for Festo VSVA-B-T32C-AH-A1-1R5L?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-T32C-AH-A1-1R5L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.