HYRIG can supply the FESTO VSVA-B-M52-MZD-A1-1T1L solenoid valve. The FESTO VSVA-B-M52-MZD-A1-1T1L is a 5/2 monostable directional control valve with a standard nominal flow rate of 1100 l/min, a 26 mm valve width to ISO 15407-2, and a 24 VDC solenoid with an M12 central plug. It uses a soft sealing principle and a mechanical spring return, and is used where higher flow than the 18 mm VSVA-B is needed, or where the valve operates down to -0.9 bar vacuum.
| Valve function | 5/2 monostable |
| Standard nominal flow rate | 1100 l/min |
| Valve width | 26 mm (ISO 15407-2) |
| Operating pressure | -0.9 bar … 10 bar |
| Pilot pressure | 3 bar … 10 bar |
| Supply voltage | 24 VDC |
| Electrical connection | M12 central plug, round design |
| Protection class | IP65 |
| Sealing principle | Soft sealing |
| Weight | ~307 g |
| Order code | 539159 |
| Model | Function | Flow rate | Width | Pressure range | Order code |
|---|---|---|---|---|---|
| VSVA-B-M52-MZD-A1-1T1L | 5/2 monostable | 1100 l/min | 26 mm | -0.9-10 bar | 539159 |
| VSVA-B-T32C-AH-A1-1R5L | 2×3/2 NC monostable | 900 l/min | 26 mm | 3-8 bar | 534552 |
| VSVA-B-B52-H-A1-1R5L | 5/2 bistable | 1100 l/min | 26 mm | 3-8 bar | 534557 |
Explore the full range in the FESTO VSVA valve terminal overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Valve width | 26 mm |
| Pneumatic connection | Sub-base, 26 mm to ISO 15407-2 |
| Electrical connection | M12 central plug |
| Supply voltage | 24 VDC |
| Protection class | IP65 |
| Weight | ~307 g |
| Operating temperature | -5 °C … +50 °C |
| Media | Compressed air to ISO 8573-1:2010 [7:4:4] |
The VSVA-B-M52-MZD-A1-1T1L is a 5/2 monostable soft-seal piston spool valve. In the de-energized state, a mechanical spring returns the spool to the normal position; when the 24 VDC solenoid is energized, the spool shifts and connects port 1 to port 4 while exhausting port 2 to port 3. The soft sealing principle provides a tighter shut-off than a hard-sealed spool valve, which is useful when the valve must hold a cylinder position against a load or when leakage would waste compressed air.
The 26 mm width with ISO 15407-2 mounting provides a 1100 l/min flow rate, higher than the 18 mm VSVA-B (550 l/min) and higher than the 900 l/min 2×3/2 variant. The operating pressure range extends to -0.9 bar, so the valve can be used in vacuum circuits as well as compressed air circuits up to 10 bar. The M12 central plug carries both the solenoid signal and the LED status indicator.
Not sure whether the 1100 l/min flow and soft sealing principle match your cylinder size and holding requirement, or need the 18 mm variant for a tighter cabinet? Send your cylinder bore, stroke, cycle rate, holding requirement, and manifold width, and we will confirm the valve function and flow rating.
Q: What is the flow rate of the Festo VSVA-B-M52-MZD-A1-1T1L?
A: 1100 l/min standard nominal flow rate, measured according to DIN 1343.
Q: What is the operating pressure range of the VSVA-B-M52-MZD-A1-1T1L?
A: -0.9 bar to 10 bar, with a pilot pressure of 3 bar to 10 bar. The -0.9 bar lower limit supports vacuum circuits as well as compressed air.
Q: What is the difference between soft sealing and hard sealing in VSVA valves?
A: Soft sealing uses an elastomer seal on the spool, which provides tighter shut-off and lower leakage when holding a cylinder against a load. Hard sealing uses a metal-to-metal fit, which is more tolerant of contaminated air but has higher leakage. The MZD variant uses soft sealing; confirm the air quality if the supply is not to ISO 8573-1:2010 [7:4:4].
Q: Does the VSVA-B-M52-MZD-A1-1T1L use the same manifold as the 2×3/2 variant?
A: It uses the 26 mm ISO 15407-2 sub-base. The 2×3/2 variant uses ISO 15407-1. Confirm the manifold standard before mixing slices on one terminal.
Q: What is the lead time for Festo VSVA-B-M52-MZD-A1-1T1L?
A: Standard lead time is 2–3 weeks from order confirmation, based on the quoted supply status.
For FESTO VSVA-B-M52-MZD-A1-1T1L selection and manifold configuration, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.