Festo ADN-32-25-A-P-A Compact Cylinder | 32 mm Bore 25 mm

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADN-32-25-A-P-A compact cylinder. The FESTO ADN-32-25-A-P-A is a double-acting compact cylinder with a 32 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning. It delivers 483 N theoretical advance force and 415 N return force at 6 bar, and operates from 0.6 bar to 10 bar. It is used where a short-stroke, high-force actuator must fit into a tight machine envelope — clamping fixtures, ejector slides, and compact transfer motions.
Conatct For Details
DetailReview(0)Additional

Festo ADN-32-25-A-P-A Compact Cylinder | 32 mm Bore 25 mm

HYRIG can supply the FESTO ADN-32-25-A-P-A compact cylinder. The FESTO ADN-32-25-A-P-A is a double-acting compact cylinder with a 32 mm piston diameter, 25 mm stroke, and P-A elastic end-position cushioning. It delivers 483 N theoretical advance force and 415 N return force at 6 bar, and operates from 0.6 bar to 10 bar. It is used where a short-stroke, high-force actuator must fit into a tight machine envelope — clamping fixtures, ejector slides, and compact transfer motions.

Key Facts



Cylinder typeCompact cylinder, ADN series
Piston diameter32 mm
Stroke25 mm
Mode of operationDouble-acting
CushioningP-A elastic, both ends
Operating pressure0.6 bar … 10 bar
Theoretical force at 6 bar483 N advance / 415 N return
Pneumatic connectionG1/8
Piston rod threadM10 × 1.25
StandardISO 21287
Order code536272

Festo ADN-32 Model Specifications & Stroke Variants

ModelBoreStrokeForce at 6 bar advancePortOrder code
ADN-32-25-A-P-A32 mm25 mm483 NG1/8536272
ADN-32-40-A-P-A32 mm40 mm483 NG1/8536274

Explore the full range in the FESTO ADN compact cylinder overview.

Data source: Technical data table.

Dimensions

ItemValue
StandardISO 21287
Piston diameter32 mm
Stroke25 mm
Pneumatic connectionG1/8
Piston rod threadM10 × 1.25
CushioningP-A elastic, both ends
Impact energy in end positions0.4 J
Operating pressure0.6 bar … 10 bar
Ambient temperature-20 °C … +80 °C

Structure / Working Principle

The ADN-32-25-A-P-A is a compact cylinder with an extruded aluminium barrel and P-A elastic cushioning. Compressed air enters one of the two G1/8 ports and drives the piston; the elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustable cushioning screw. This keeps the cylinder length short and eliminates the need to tune cushioning during commissioning.

The 32 mm bore produces 483 N theoretical advance force and 415 N return force at 6 bar. The 0.6 bar lower pressure limit allows operation from a low-pressure supply. The impact energy rating is 0.4 J per end position. The G1/8 port and M10 × 1.25 piston rod thread match the standard fittings and accessories for this bore size.

Applications

  • Clamping fixtures: where a 32 mm bore provides 483 N at 6 bar in a 25 mm stroke, and the compact body fits into the fixture envelope.
  • Ejector slides: where the cylinder pushes a part out of a die or fixture and the stroke is limited to 25 mm.
  • Compact transfer motions: where the machine frame cannot accommodate a full ISO 15552 cylinder and the load is within the 32 mm bore capacity.
  • Low-pressure supply systems: the 0.6 bar lower limit allows operation from a supply that would be below the ADVU 1.2 bar minimum.

Selection Support

Not sure whether 483 N at 6 bar is sufficient for your clamp or ejector load, or need the 40 mm bore for higher force? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the cylinder model and accessory combination.

Frequently Asked Questions

Q: What is the theoretical force of the Festo ADN-32-25-A-P-A at 6 bar?
A: 483 N advance and 415 N return, based on the 32 mm piston area.

Q: What is the impact energy rating?
A: 0.4 J per end position. Confirm that the moving mass and velocity produce an impact energy within this limit.

Q: Does the ADN-32-25-A-P-A have adjustable cushioning?
A: No. The ADN series uses P-A elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.

Q: What is the difference between ADN-32-25 and ADN-32-40?
A: Both have a 32 mm bore and deliver 483 N at 6 bar. The 25 mm variant has a shorter stroke; the 40 mm variant has a longer stroke. Choose based on the required travel.

Q: What is the lead time for Festo ADN-32-25-A-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO ADN-32-25-A-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit