Festo ADN Compact Cylinders | ISO 21287 Bore & Stroke Range

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the FESTO ADN ISO 21287 compact cylinder range and its variants. The ADN series is a double-acting compact cylinder family with bore sizes from 25 mm to 40 mm, strokes from 25 mm to 50 mm, and P-A elastic end-position cushioning. It is used where a short-stroke actuator must fit into a tight machine envelope — clamping fixtures, ejector slides, and compact transfer motions. The 0.6 bar lower pressure limit allows operation from a low-pressure supply.
Conatct For Details
DetailReview(0)Additional

Festo ADN Compact Cylinders | ISO 21287 Bore & Stroke Range

HYRIG can supply the FESTO ADN ISO 21287 compact cylinder range and its variants. The ADN series is a double-acting compact cylinder family with bore sizes from 25 mm to 40 mm, strokes from 25 mm to 50 mm, and P-A elastic end-position cushioning. It is used where a short-stroke actuator must fit into a tight machine envelope — clamping fixtures, ejector slides, and compact transfer motions. The 0.6 bar lower pressure limit allows operation from a low-pressure supply.

Key Facts



SeriesADN, compact cylinder
StandardISO 21287
Bore range25 mm, 32 mm, 40 mm
Stroke range25 mm, 40 mm, 50 mm
Operating pressure0.6 bar … 10 bar
CushioningP-A elastic, both ends
Position sensingMagnetic piston and sensor slots
Force at 6 bar295 N … 754 N advance

ADN Model Range & Specifications

ModelBoreStrokeTheoretical force at 6 barPortOrder code
ADN-25-25-A-P-A25 mm25 mm295 NM5536255
ADN-32-25-A-P-A32 mm25 mm483 NG1/8536272
ADN-32-40-A-P-A32 mm40 mm483 NG1/8536274
ADN-40-25-A-P-A40 mm25 mm754 NG1/8—
ADN-40-50-A-P-A40 mm50 mm754 NG1/8536296

Data source: Technical data table.

Structure / Working Principle

The ADN series uses an extruded aluminium barrel with P-A elastic end-position cushioning. Compressed air enters one of the two ports and drives the piston; the elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustable cushioning screw. This keeps the cylinder length short and eliminates the need to tune cushioning during commissioning.

The 25 mm bore produces 295 N at 6 bar; the 32 mm bore produces 483 N; the 40 mm bore produces 754 N. The 0.6 bar lower pressure limit is lower than the ADVU series, so the ADN can operate from a low-pressure supply or in applications where the supply pressure fluctuates.

Applications

  • Clamping fixtures: where a 25 mm or 32 mm bore provides the clamp force in a short stroke, and the compact body fits the fixture envelope.
  • Ejector slides: where the cylinder pushes a part out of a die or fixture and the stroke is limited to 25-50 mm.
  • Compact transfer motions: where the machine frame cannot accommodate a full ISO 15552 cylinder and the load is within the selected ADN bore capacity.
  • Low-pressure supply systems: the 0.6 bar lower limit allows operation from a supply that would be below the ADVU 1.2 bar minimum.

Selection Support

Not sure which ADN bore and stroke match your clamp or ejector load? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the model code and accessory combination. Explore related models: ADN-25-25-A-P-A, ADN-32-25-A-P-A, ADN-32-40-A-P-A, ADN-40-25-A-P-A, and ADN-40-50-A-P-A.

Related Pages

Frequently Asked Questions

Q: What is the pressure range of the Festo ADN series?
A: 0.6 bar to 10 bar, with 295 N to 754 N theoretical force at 6 bar depending on bore.

Q: What is the difference between ADN and ADVU compact cylinders?
A: ADN has a 0.6 bar lower pressure limit and elastic cushioning; ADVU has a 1.2 bar lower pressure limit and a body designed for longer strokes in a compact envelope.

Q: Does the ADN series have adjustable cushioning?
A: No. ADN uses P-A elastic end-position cushioning. If adjustable cushioning is required, consider the DSBC series.

Q: What is the theoretical force of ADN-32-40-A-P-A at 6 bar?
A: 483 N advance, based on the 32 mm piston area.

Q: What is the lead time for Festo ADN compact cylinders?
A: Standard lead time is 7-17 days from order confirmation, based on the quoted supply status.

Contact

For FESTO ADN compact cylinder selection and mounting accessories, contact HYRIG: info@hyrig.com.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit